nOversight vs WiFi Heat Map & Analyzer
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
nOversight
Visualize your Wi-Fi signal strength and performance in real-time as you move. Identify dead zones, interference, and network issues with AR and map views. Review historical data to pinpoint past problems.
- Live Wi-Fi signal view while walking
- AR and map-based performance visualization
- Recent connectivity history timeline
- On-device data processing for privacy
- Detailed technical Wi-Fi information
- Identify connected access points
Read full descriptionHide full description
Wi-Fi you can understand. nOversight combines signal strength, signal quality and network performance into one clear story: where your Wi-Fi is strong, where it struggles and what's causing it, with real measurements behind every result. Walk around your home or workplace with your iPhone or iPad and your Wi-Fi story builds as you go. It shows how well your Wi-Fi equipment covers each area, how your device roams between access points or mesh devices, and how your internet connection holds up as you move. A walk test shows you where the problem is, which helps you decide whether to move the router, add a mesh device or change a setting. Walk the same route again afterwards and compare the results to see what your changes achieved. You don't need specialist hardware or an account. Built for home users and Wi-Fi professionals: start with the summary, then dig into as much detail as you like. YOUR WI-FI STORY The story checks each part of your connection and works out which ones are causing problems, then sums it up in plain language: • Coverage: where the signal is good enough, and where it isn't • Roaming: when your device moved between access points or mesh devices, and whether it moved at the right time • Wi-Fi speed: the link rates your device and access point actually achieved • Quality: how much noise and interference there is compared with your signal • Internet: built-in Orb tests measure speed and responsiveness, so you can tell a Wi-Fi problem from a broadband one Results are graded against thresholds you can adjust. The defaults suit home use, and you can tighten them to the targets used in business networks. SEE IT WHERE IT HAPPENS • Map View: walk a floor plan or outdoor area and build a live Wi-Fi heatmap • AR View: hold up your device to see Wi-Fi performance laid over the room around you FIND OUT WHAT ALREADY HAPPENED A dropout may be over by the time you start testing. nOversight can read your device's recent connectivity history and turn it into a timeline. It shows which network and access point you were on, when the signal dropped and when your device roamed. FOR INSTALLERS AND IT PROFESSIONALS Every result in the story comes from the underlying measurements, and you can see all of them: • Real RSSI in dBm, noise, SNR and data rates • Channel, bandwidth (estimated), band and Wi-Fi generation, including Wi-Fi 6, 6E and 7 • Access-point detail and a roam-by-roam history • Signal history and histograms • Why your device chose one access point over another With Pro Analyzer you can save recordings and reopen them later. You can also import diagnostic logs to get retry and congestion data for coverage checks, deployment validation and troubleshooting. YOUR WI-FI DATA STAYS ON YOUR DEVICE nOversight analyses your Wi-Fi on your iPhone or iPad. There's no account and no cloud sync, and your recordings are never sent to us. Speed and responsiveness tests connect to test servers only to measure your internet connection. CHOOSE YOUR LEVEL Free: live monitoring in short sessions, so you can see your connection straight away. Analyzer: unlimited monitoring, plus roaming timelines, access-point analysis, signal history and histograms. Pro Analyzer: everything in Analyzer, plus saved recordings and diagnostic log import for retry and congestion detail. SUBSCRIPTIONS Analyzer — £2.49/year Pro Analyzer — £3.99/month or £29.99/year Terms of Service: https://www.numerousnetworks.co.uk/terms-and-conditions/ Privacy Policy: https://www.numerousnetworks.co.uk/privacy/
WiFi Heat Map & Analyzer
Visualize your local network in 3D and 2D, analyze its performance, and discover connected devices. It offers tools to scan ports, identify services, and measure network latency and throughput.
- 3D animated network view
- Network analyzer tools
- Wireless network heatmap
- Device discovery
- Open TCP port scanning
- mDNS/Bonjour service discovery
- Latency and throughput measurement
Read full descriptionHide full description
Find your home WiFi dead zones in under 10 minutes, using nothing but your iPhone. Walk from room to room, tap to measure, and watch a color map of your actual WiFi performance build itself — speed and latency, where you really live. No subscription. No ads. No account. One purchase, yours forever. WHAT YOU CAN ACTUALLY FIND OUT - Which rooms are slow, and how slow, in numbers you can act on - Whether the problem is your WiFi or your internet connection - Where to put a mesh node, an extender or the router itself - Which of the devices on your network is eating your bandwidth - What every IoT device on your network is broadcasting about itself HOW IT WORKS 1. Pick one of the ready-made floor plans, or use a photo of your own plan 2. Walk to a spot, tap once — the app measures throughput and latency there 3. Repeat for each room. The heat map builds as you go 4. Save the finished map to your photos, to compare after you move the router Step-by-step mode does the setup for you: no target to choose, no protocol to configure, no documentation to read. The advanced interface is still there when you want full control. NO EXTRA HARDWARE. NO SUBSCRIPTION. Professional WiFi surveys need an Ekahau Sidekick or a WLAN Pi. This app needs your iPhone. And unlike almost every other WiFi analyzer on the App Store, there is no weekly plan, no annual plan, and no ads — you buy it once. ALSO A COMPLETE NETWORK TOOLKIT - Scan every device on your LAN, with vendor, IP address and open ports - Discover every mDNS/Bonjour service: HomePod, Apple TV, printers, IoT - Ping and latency to local devices and to any internet host - Throughput measurement against another device running this app, any TCP CHARGEN/DISCARD server, or the internet - Run a TCP CHARGEN or DISCARD service on your own device - 3D animated view of your local network topology FULL SNMP CLIENT INCLUDED Query any SNMP agent on your routers, switches, access points and printers. SNMP v1, v2c and v3, with noAuthNoPriv, authNoPriv and authPriv, MD5 and SHA1 authentication, DES and AES privacy. 64 standard MIBs are bundled, so object identifiers are resolved to readable names offline — no server, no subscription, nothing to configure beyond the agent address and credentials. FOR HOMES AND FOR PROFESSIONALS Built by a network engineer. Simple enough to diagnose your apartment on a Sunday afternoon, precise enough that telecom professionals use it on the job. BEFORE YOU BUY — WHAT THIS APP DOES NOT DO Apple does not let any third-party iOS app read WiFi signal strength or scan neighboring networks, and no App Store app can do it — this is why professional tools need external hardware. This app maps what it can measure at the spot where you are standing: real throughput and latency. That is what a home heat map needs. It measures the network you are connected to, one heat map at a time.
Screenshots
Verdict
The clearest difference is price: nOversight at Free against WiFi Heat Map & Analyzer's $3.99. WiFi Heat Map & Analyzer's advantage is rating (4.0 vs 3.3) and in-app purchases (none vs 3). On review sentiment, ratings volume, update cadence and ads there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
nOversight is free to download; WiFi Heat Map & Analyzer costs $3.99 up front. nOversight sells 3 in-app purchases, starting at $2.49 per year. WiFi Heat Map & Analyzer asks for nothing beyond the download.
WiFi Heat Map & Analyzer holds the better App Store score, 4.0 against 3.3. Both are backed by a comparable volume of ratings — 24 and 28 respectively. Written reviews complicate that: 39% of nOversight's written reviews are positive against 33% of WiFi Heat Map & Analyzer's, so the app with the better star average is not the one people write more warmly about.
nOversight ships an update every 4 weeks, WiFi Heat Map & Analyzer every 5 weeks. The most recent releases landed on November 18, 2026 and November 17, 2026 respectively.
| Parameter | nOversight | WiFi Heat Map & Analyzer |
|---|---|---|
| Price | Free — better | $3.99 |
| Rating | 3.3 (24 ratings) | 4.0 (28 ratings) — better |
| Positive reviews | 39.3% of reviews — better | 33.3% of reviews |
| Number of ratings | 24 | 28 — better |
| Update frequency | Every 4 weeks — better | Every 5 weeks |
| Ads | No | No |
| In-app purchases | Yes | No — better |
| Monetization | Free with in-app purchases — better | Paid |
| Best chart rank | — | #184 — better |
| Devices | iPhone, iPad | iPhone, iPad |
| Requires iOS | 17.0 | 16.6 — better |
| Further details — not scored | ||
| Size | 61 MB | 93 MB |
| Age rating | 4+ | 4+ |
| Developer | Numerous Networks Limited | Alexandre Fenyo |
Customer experience
nOversight
WiFi Heat Map & Analyzer
In-app purchases
nOversight
- Analyzer (Annual)$2.491 Year
- Pro Analyzer (Monthly)$3.991 Month
- Pro Analyzer (Annual)$27.991 Year
WiFi Heat Map & Analyzer
No in-app purchases
Questions
Is nOversight free?
Is WiFi Heat Map & Analyzer free?
Which has better reviews, nOversight or WiFi Heat Map & Analyzer?
Do nOversight or WiFi Heat Map & Analyzer have ads?
Which is updated more often, nOversight or WiFi Heat Map & Analyzer?
Other comparisons















