Camera Report vs LidarAC

With Camera Report you can generate, export and send all the information in a pdf format. It can work in airplane mode for a quiet set ;) and in night mode for dark stages. It is intuitive and fast. All the information collected during the shooting will be saved and logged in your phone or in the backend as long as you will need it. It is a useful tool for recording technical specs and scenes’ notes by keeping it organized and bonded. - No more paper required or heavy silver folders in your set-bag.  - No more complaints about your handwriting or missing information… Bye, bye, hasta la vista, díky čao! Features and functions: 1. PROJECT MENU Tap a field to edit the basic set up of the project. - Production info: Company, Director, Cinematographer, Assistant Camera - Slate system: European or American slate system, the cells are formatted to use the layouts of each system. - Camera: built-in database with the most used digital film cameras - Lens series: built-in lens database with different brands and lens types - Focal length: precisely choose the focal length available in your lens case. This will save you time when filling in each take. - Fill in the basics: Frame rate, ISO, Shutter angle, Aspect ratio and project Compression Once complete press save, and your project will be loaded and ready to use (all the information will be automatically add it to each new take). For further changes slide the project name to the left and: Edit or Erase function will be display. 2. MAIN MENU 2.1 Menu Bar Switch between Scene, Takes, Camera & Roll and navigate through the filled data. 2.2 ADD Take button: Choose Add Take and you are ready to start! All your information from the project set up will already be displayed, until you decide to change it. - Camera: name the camera body A, B, C…X, Y, Z - Roll/Card: will start from the last entered camera roll/camera card - Scene: fill in the scene code according to the script (this information will be kept if there is more than one take) - Take: no need to fill in. It will work automatically in increasing numbers. It can also be modified manually. - Lens series: will show only the selected brands and lens types chosen in the project set up. / + symbol, in case of a special lens need, this + symbol allows you to type in a new brand or lens type. - Focal length: only the selected focal length from the project set-up will be displayed on the scrolling menu. /+ symbol, allows you to type in a new focal length if it is not available in the database. - Aperture/T-stop: type in the lens aperture and make it precise by using the thirds functions 1/3,1/2,2/3 - Filter: multiple filter cells for neutral density, colour correction or effect filters. - Frame rate, ISO & Shutter angle: will be filled in with the information loaded in the project set up. Manual changes are also available if is necessary. - Colour temperature/White balance: fill in the colour temperature and the Kelvin degree symbol will be automatically displayed. - Resolution: choose from the scrolling menu the most common resolution or select the + symbol and type it in manually. - LUT: fill in the name of the Look Up Table - VFX: summarize form of VFX data for special shots: Height and Tilt, from and to. For your values, choose between metric or imperial system. - Note: for extra consideration, postproduction messages or any other type of information. - Location: fill in manually or with the LOC function it will take the current phone GPS place. - Picture: take a picture for reference or camera rigs for extra help. The image will appear beside the current take. “All the information loaded in the 1st take will be kept and ready for the next takes.” 2.3 Backend You can administrate and prepare your projects through the backend features. Sing in, Fill in, send it and enjoy it. Terms of Use: https://camerareport.logflick.com/terms

LidarAC – RX is the handheld control and monitoring interface for the LidarAC system, built to extend Tilta Nucleus M and N setups for modern focus workflows. The idea is simple: bring tools normally found on high-end hand units to the Nano by using an iPhone. The system consists of two Modes. RX acts as the handheld interface and connects to the Nucleus Nano II via Bluetooth. TX runs on a second iPhone mounted on the camera (iPhone 12 Pro or newer) and provides LiDAR-based distance data. RX already enhances the Nucleus on its own with custom lens profiles, focus scaling, and marker tools. The full potential unlocks when paired with TX, adding real-time distance data directly into the focus workflow. Instead of relying on raw motor values, the system translates focus into usable distance context. Depth of field is calculated and visualized in real time, helping focus pullers make faster and more confident decisions, especially in dynamic scenes. Lens profiles allow precise mapping between LiDAR data and lens behavior, including aperture-based depth of field. Camera profiles handle CoC and sensor offset, ensuring accurate results in real-world setups. The focus scale is fully interactive and can switch between a flat mode and a focus wheel inspired mode. Values can either be mapped visually like on the lens for intuitive pulling, or displayed linearly to better understand spatial relationships within the scene. Marker and tracking tools make it easy to set, follow, and recall focus points. Features like spot measurement, 2D and 3D tracking, and a top-down LiDAR view provide clear spatial awareness on set. Haptic feedback increases as you approach a marker, giving intuitive confirmation without looking away. Key features: • Real-time LiDAR distance data for people, faces, and eyes • Spot distance measurement • 2D and 3D tracking points • Top-down LiDAR scene view • Custom lens profiles with depth of field visualization • Multiple focus scale modes (linear, lens matched, logarithmic) • Marker-based focus assistance with haptic feedback