Comparison

ScanMyPeripherals vs GPS Bug Detector

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

ScanMyPeripherals

Features
Read full description

ScanMyPeripherals is a Bluetooth Low Energy (BLE) toolkit for developers, makers and hardware testers. Scan nearby devices, connect and explore their services and characteristics, then read, write and receive notifications — everything you need to build and debug BLE devices. Features • Scan nearby BLE devices and see their name, UUID and signal strength (signal bars and dBm) • Search by name or UUID; connected devices are shown separately with one-tap Open and Disconnect • Explore services and characteristics, with names shown for standard services (such as Heart Rate and Battery) • See at a glance what each characteristic supports: Notify, Read, Write • Read and write data as UTF8, HEX or Byte Array, with instant feedback on invalid input • Turn on Notify to receive data from the device in real time • Device Info shows a 2-minute signal strength chart with min, average, max and signal quality • Every connection, read, write and error is logged, grouped by date and color-coded for easy review Designed for comfort • A dark interface that's easy on the eyes during long sessions • Available in English, Traditional Chinese and Simplified Chinese — switch right in the app • Works on iPhone and iPad Great for • Developing and testing BLE device firmware • Checking that advertising, services and characteristics are set up correctly • Sending commands quickly and watching how the device responds

About

GPS Bug Detector

Detect hidden trackers and spy cameras using your phone's sensors. Offers multiple scanning modes including magnetometer, camera, Bluetooth, and Wi-Fi to identify electronics, lenses, and broadcasting devices in your surroundings. Review scan history to compare changes over time.

Highlights
  • Magnetometer for detecting non-broadcasting hardware
  • Multiple camera scanning modes (Flash, Sweep, Retro-reflect)
  • Infrared emitter detection
  • Bluetooth scanner with signal strength and device history
  • Wi-Fi scanner for network devices
  • Scan history for comparison
  • Detects devices using phone's built-in sensors
Features
Read full description

Someone can hide a tracker in a car in under a minute. Finding it takes longer. GPS Bug Detector gives you four different ways to search, because no single sensor catches everything. Scan a room, a rental car, a hotel or an office, and see what is actually around you before you settle in. BUG DETECTOR The magnetometer reads changes in the magnetic field around electronics tucked inside seats, bumpers, panels and furniture. Watch the gauge climb as you move the phone closer. This is the layer that finds hardware with no radio at all, which is exactly what a passive GPS logger is. SPY CAMERA Three ways to hunt for a lens, because hidden cameras hide differently depending on the room. Flash lights the surface and holds the exposure so glass gives itself away. Sweep walks you across a wall or ceiling in a slow pass so nothing gets skipped. Retro-reflect catches the bright pinpoint bounce a lens sends straight back at your light source. This is the one that finds cameras behind smoke detectors, mirrors, vents and clock faces. The camera view also picks up infrared emitters that night vision setups use, which your eye cannot see in a dark room. BLUETOOTH SCAN The Bluetooth scanner lists every BLE device broadcasting nearby, sorted by signal strength in dBm. Known hardware gets labelled, so your neighbour's laptop reads as a laptop and an unknown tag reads as unknown. Walk toward a device and watch the number climb until you are standing on top of it. Tap any result to open the device inspector for advertised services and full signal history. WI-FI SCAN See every device sitting on the network you are connected to, with its IP address and manufacturer. Routers, phones, laptops and smart TVs get identified. So does an IP camera. If you are staying somewhere and a Hikvision or Reolink device shows up on the house Wi-Fi that nobody mentioned, you will know in about ten seconds. HISTORY Every scan is saved. Run one when you check into a room and another the next day, and compare. A device that appeared overnight is worth a second look. WHO USES IT Travellers checking an unfamiliar room before unpacking. Drivers who share a car, sell a car, or just got one back from a shop. Hosts and guests who want a quick privacy pass on a rental. Anyone with a reason to believe a device followed them home. WHAT THIS APP IS NOT This is not a radio frequency sweeper. Your iPhone has no RF antenna a developer can reach, and any app claiming to sweep RF is guessing. GPS Bug Detector works only with sensors your phone actually has: the magnetometer, the camera, Bluetooth and Wi-Fi. Every reading you see is a real reading. It cannot detect an audio bug or a listening device that transmits over cellular, and it cannot find a passive GPS logger over the air, since a device that only records and never broadcasts has no signal to catch. The magnetometer pass is your best tool in that case, and a physical search is still worth doing. EULA:https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy & EULA: https://www.appsera.net/app-store-privacy-policy-gps-bug-detector/

Screenshots

ScanMyPeripherals4 screens
GPS Bug Detector4 screens

Verdict

The call

The clearest difference is in-app purchases: ScanMyPeripherals at none against GPS Bug Detector's 3. ScanMyPeripherals also leads on iOS requirement (13.0 vs 15.0). On price, ads and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. GPS Bug Detector sells 3 in-app purchases, starting at $2.99 per 7 days. ScanMyPeripherals asks for nothing beyond the download.

Scorecard2 real differences · 8 level
ScanMyPeripherals versus GPS Bug Detector: the parameters behind the verdict, then further details
ParameterScanMyPeripheralsGPS Bug Detector
PriceFreeFree
Rating—5.0 (1 ratings) — better
Positive reviews—100.0% of reviews
Number of ratings—1 — better
Update frequencyEvery 3 days—
AdsNoNo
In-app purchasesNo — betterYes
Monetization—Free with in-app purchases
DevicesiPhone, iPad, iPod, Mac — betteriPhone, iPad, iPod
Requires iOS13.0 — better15.0
Further details — not scored
Size5 MB49 MB
Age rating4+12+
DeveloperHsinChun WuRamazan Tugay Kahraman

In-app purchases

None

ScanMyPeripherals

No in-app purchases

3 purchases

GPS Bug Detector

Subscriptions2
  • Bug Detector Pro$2.997 Days
  • Bug Detector Pro$39.991 Year
One-time1
  • Lifetime Access$69.99

Questions

Is ScanMyPeripherals free?
ScanMyPeripherals is free to download, with no in-app purchases.
Is GPS Bug Detector free?
GPS Bug Detector is free to download, with in-app purchases available.
Do ScanMyPeripherals or GPS Bug Detector have ads?
Neither ScanMyPeripherals nor GPS Bug Detector shows ads.

Other comparisons