HD vs SQ+ MixPad

HD-Mix provides the user with remote control of the Heritage Digital series of mixing consoles, offering the same functionality and workflow found on the console from your tablet. Connection Screen Upon boot, HD-Mix will automatically scan for consoles that are on the same network as your tablet, or you can manually enter the console's IP from the connection screen. Mix View Mix View provides the user with a clear and easy to navigate overview of the console meter bridge and faders, with access to all Inputs, Auxes, Matrices, VCA's and POP Groups. HD-Mix utilises the same Common Control Rotary used in the Heritage series consoles, allowing the user to move and lock any parameter on screen for ease of access. Choose between standard and expanded 8/16 channel fader layouts to view more channels at once. Monitor Mode HD-Mix supports Monitor Mode, allowing the user to select a target output channel and send multiple sources to it directly via the channel faders. While active, the channel faders become dedicated send level controls for the selected monitor target, offering fast, tactile control over monitor mixes. The fader tray can be pulled down to reveal the selected channel widgets, with access to and full control of the following: - Configuration Provides the user with an overview and control of: • 48V • Mic Gain control • Trim control • Phase • Delay • Talk • Solo / Bus configuration options (Solo A, Solo B, Solo A&B) - EQ Full parameter control of channel EQ with Band Locks, Flatten One / All band functionality and Full Screen mode. - Gate Full access and control of channel gates / duckers, with expandable Key Filter section. - Compressor Channel compressors with full control of all parameters and modes including key sidechain source control. - Effects The Effects widget shows effects populated in the selected channel, with support for full screen effect editing. - Sends and Matrices The Sends and Matrices widget provides the user with a complete overview of contributions and parameter controls (for the selected channel) to all console Aux and Matrix busses. - Flip Mode HD-Mix can be placed into Flip Mode, allowing the user to select and send contribution levels from an easy to access interface. When Flip is activated the meter bridge can be replaced with a Flip Target Select window, which allows the user to select a Flip target and then set appropriate contribution levels. - Full Screen Effect Support HD-Mix provides full screen parameter control for supported effects, including the Midas XL4 EQ, GEQ and Ocean EQ, with additional effects being added in future updates. - Preferences Page Solo System preferences are available to the user, along with Channel Flip Lock functionality and Reset Channel EQ Lock functionality. ---------------------- Please Note: We recommend using a wired connection from the console to the Access Point in critical applications (use of a wired connection from the Access Point to the tablet will further ensure a consistent connection).

SQ+MixPad allows control of an SQ+ console over a wired or wireless network. It can be used simultaneously and independently of the SQ+ surface/hardware controls, so it can provide supplementary local control as well as giving the engineer the freedom to move around and mix from different listening positions. Three devices running SQ+MixPad can be connected and used at the same time as using the SQ+ itself, giving four separate points for control of all mixes. V2.0.3 - This version works with SQ5+, SQ6+ or SQ7+ consoles running firmware V2.0.x Please note: It is NOT compatible with SQ-5, SQ-6, SQ-7 or SQ-Rack mixers. It provides the following: Level and Routing Control - Send levels, panning, assignments, pre/post settings and mutes from all channels to all mixes and from mixes to outputs Send and Return levels for FX and RackUltra FX Routing screen with overview and full control DCA and Mute Group control, including assignments Processing Control - Input channel Preamp/DEEP Preamp Model/HPF/Gate/Insert/PEQ/Compressor Mix channel Ext In/Insert/GEQ/PEQ/Compressor DEEP expanders, compressors and GEQ’s FX Parameters and FX Return PEQ RackUltra FX Parameters and return channel PEQ’s Access to all Libraries Patching – Full patching matrix for all Inputs/Outputs and Tie Lines Access to Patch Library ‘1-to-1’ diagonal block patching Offline Mode – Edit and manage Shows, Scenes and Libraries without a connection to the mixer Transfer entire shows between MixPad and an SQ+ Share/store shows to cloud or email (when available on the device) Other features include – Scene/Cue Management Global filters, scene filters and channel safe control Works with unit User Permissions Copy/Paste and Reset functionality Ganging setup AMM control and setup SQ Drive Control Full control of Signal Generator and assignments 6 custom layers with the ability to copy or use/follow desk layers All input/output/processing metering Meters and Channel RTA view and control Mixer Config PAFL setup and selection Channel naming/colour SoftKey and MIDI strips setup and use Follow mixer Channel/Mix Select option