FabFilter Twin 3 vs TB Lowtone
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
FabFilter Twin 3
This powerful virtual analog synthesizer offers a redesigned interface and expanded sound-shaping capabilities. Create a wide range of synth sounds with advanced oscillators, filters, a flexible modulation system, and an all-new FX section. It supports MIDI input and MPE for expressive performances.
- Virtual analog synthesis
- Flexible oscillators and filters
- Advanced modulation system
- All-new FX section
- MPE support
- Arpeggiator
- Preset browser
Read full descriptionHide full description
Since its first release in 2005, FabFilter Twin has been famous for its filter quality and oscillator sound. FabFilter Twin 3 expands and improves on its predecessors in every area, including a complete redesign of the GUI and workflow, more and better oscillators and filters, a radically powered-up modulation system, an all-new FX section, and much more. Sonically versatile, supremely intuitive, and spectacularly ‘analog’, Twin 3 is a dream instrument for creating synth sounds of all kinds, from basses, leads, and pads to plucks, drums, effects, and beyond. The Twin 3 app lets you play via the on-screen keyboard or a MIDI keyboard connected to your iPad. To use Twin 3 as a plug-in, you need an AUv3-compatible host app like Auria, AUM or Cubasis. Twin 3 will appear in the list of Audio Unit extensions for instrument plug-ins in the host app. Key features: - Virtual analog synth featuring four flexible oscillators, four filters, six FX modules, and a vast modulation system with a wealth of flexible source signal generators, drag and drop source/target routing, and no limit to the number of modulation assignments that can be made - Fully redesigned, greatly simplified interface with easier workflow - Completely overhauled modulation system with redesigned modulation sources, and floating slot and FX panels - All-new FX section, housing Reverb, Delay, Chorus, Phaser, Drive, and Compressor modules - MPE support for expressive, per-note modulation - Arpeggiator with Groove/Legato controls, note order, latch options, and more - Full-featured preset browser, with tags, favorites, and search and filter functions, and new factory preset library - Per Oscillator polyphony mode: each incoming note triggers a different oscillator - Bell, Shelf, and Notch vintage-style EQ filter shapes - 6dB/octave filter slope option - Modulatable filter Cutoff/Peak Offset knobs knobs, for adjusting all filters at once - High Quality mode — 4x oversampling - Transient mode turns Envelope Followers into transient detectors - Curve adjustment handles for EG Attack, Decay, and Release stages - Slider mode (vertical-only operation) and Range setting (toggles between bipolar and unipolar behavior) for XY controllers - Hide all modulation sources except for XY controllers and Sliders at a click - Native sustain pedal support - Even better oscillator and filter sound quality, with analog-modelled drift - Maximum number of voices doubled from 32 to 64 - Lower minimum Envelope Generator Attack, Decay, and Release times - Maximum number of XY controllers/Sliders increased to six - Envelope Generator Threshold, XLFO Balance, and Frequency Offset made available as modulation targets - Modulation sources can be renamed - Maximum number of modulation slots increased to 100 - Legato mode for MIDI-triggered XLFO - Range options added to MIDI Sources: Negative (-1 to 0), Centered (-1 to 1), and Positive (0 to 1) - Carefully designed and curated factory presets, plus the ability to save your own presets - Undo/redo and A/B comparison "FabFilter Twin is one of the best virtual analogues we've heard so far, and at this price point it's well worth the investment!" — Computer Music "Once I found FabFilter Twin, I immediately noticed how great it works and how amazing it sounds!" — George Morel
TB Lowtone
This app is an innovative bass synthesizer and AUv3 plugin that uses loudness-domain harmonic synthesis for deeper, more consistent bass sounds. It features multiple oscillators, modulation options, and built-in effects, plus an AI randomizer for creating new patches.
- Loudness-domain harmonic synthesis
- 3 analog-simulated oscillators
- Voltage-controlled noise synthesizer
- AI randomizer for patch generation
- Extended LFOs and ADSR envelope
- Pro quality effects (reverb, chorus, delay)
- AUv3 plugin support
Read full descriptionHide full description
TB Lowtone is an innovative bass synthesizer app and AUv3 plug-in featuring three analog-simulated, voltage-controlled oscillators with a large variety of waveform algorithms, continuous pulse-width modulation (PWM), Frequency Modulation (FM) and oscillator hard sync, complemented by a voltage-controlled noise synthesizer, parameter modulation a re-designed non-linear voltage controlled filter. TB Lowtone is the world's first bass synthesizer featuring loudness-domain harmonic synthesis, creating deeper, more consistent and production-ready bass sounds compared to conventional synthesizers operating in the (linear) amplitude domain. TB Lowtone also features an AI randomizer that generates new patches with a single click, and which learns from the patches you have already created to generate new, personalized patches! Loudness-domain synthesis Loudness perception of tones and harmonics is known to be highly non-linear and intricately frequency and level dependent. Equal loudness contours, or Fletcher-Munson curves demonstrate this drastic effect for sine tones, which is especially relevant for low frequencies. The loudness of a synthesizer bass note, and all its individual harmonics, will therefore depend strongly on what note you play on your synth's keyboard. To overcome the resulting inconsistencies in loudness and timbre, TB Lowtone features innovative, loudness-domain synthesis algorithms that adjust each harmonic individually to compensate for loudness deviations across frequency. Modulation and FX TB Lowtone provides two extended low-frequency oscillators (X-LFOs) featuring a wide range of waveforms. The LFOs can be beat and key synced, with a configurable onset delay and a specific number of cycles to run. In addition, a conventional ADSR envelope with configurable onset delay is provided. To top if all off, a gate editor designed to quickly put together modern production modulation patterns is available as well to modulate a range of VCO, VCN and VCF parameters. Reverb, chorus, and delay effects and a high-quality peak limiter are provided to produce production-ready sounds. Features: - 3 VCOs plus a VCN featuring a wide range of waveform algorithms - All VCOs support hard sync, pulse-width modulation (PWM) and frequency modulation (FM) - Lots of filter types for spectral shaping - 2 LFOs, one extra envelope and a gate editor for parameter modulation - Pro quality effects (reverb, chorus, delay, peak limiter) - Unique loudness domain synthesis algorithms - A smart randomiser that learns from your patches - AUv3 with resizable UI and dozens of color themes to choose from - Preset management including import and export options - Undo, redo, A/B switching What you should know: - Licenses acquired for this platform are not compatible with other platforms. - Audio Unit (AUv3) extensions require an iPad mini 2, iPad 4 or later models.
Screenshots
Verdict
The clearest difference is price: TB Lowtone at $9.99 against FabFilter Twin 3's $17.99. TB Lowtone also leads on update cadence (every 3 months vs every 10 months) and device support (3 vs 1). FabFilter Twin 3's advantage is ratings volume (42 vs 14). On rating, review sentiment, ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
FabFilter Twin 3 costs $17.99 and TB Lowtone $9.99 up front. Neither carries in-app purchases, so what you see is what you pay.
FabFilter Twin 3 holds the better App Store score, 4.6 against 4.4. Both are backed by a comparable volume of ratings — 42 and 14 respectively. Written reviews point the same way: 86% of FabFilter Twin 3's written reviews are positive against 85% of TB Lowtone's.
FabFilter Twin 3 ships an update every 10 months, TB Lowtone every 3 months. The most recent releases landed on November 17, 2026 and November 7, 2026 respectively.
| Parameter | FabFilter Twin 3 | TB Lowtone |
|---|---|---|
| Price | $17.99 | $9.99 — better |
| Rating | 4.6 (42 ratings) — better | 4.4 (14 ratings) |
| Positive reviews | 86.2% of reviews — better | 84.6% of reviews |
| Number of ratings | 42 — better | 14 |
| Update frequency | Every 10 months | Every 3 months — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Paid |
| Devices | iPad | iPhone, iPad, iPod — better |
| Requires iOS | 14.0 | 13.0 — better |
| Further details — not scored | ||
| Size | 14 MB | 13 MB |
| Age rating | 4+ | 4+ |
| Developer | FabFilter | ToneBoosters |
Customer experience
FabFilter Twin 3
TB Lowtone
In-app purchases
FabFilter Twin 3
No in-app purchases
TB Lowtone
No in-app purchases









