DMXRef vs LectroRM

DMXRef – Never guess your DMX address or DIP switch setting again DMXRef is the must-have tool for lighting designers, theatre techs, stagehands, and live-event riggers who work with DMX systems. Combine speed, accuracy, and a clear interface to eliminate tedious calculations and configuration errors. Why DMXRef will save you time & headaches • Instantly convert between DMX, DIP switch settings, local vs global addresses, and dimmer-doubler notation • Fill in multiple fixtures’ addresses together, even across DMX universes • Convert local (e.g. “2/1”) → global (e.g. “513”) and back; get universe + channel fast • Store your DIP switch settings for repeated device types, so you don’t have to re-enter common values • Dark mode support, clean UI optimized for iPhones in cramped backstage conditions Perfect for: • Theatre & live event lighting technicians • Touring engineers setting up multiple fixtures • Students or beginners wanting to learn DMX addressing without expensive hardware

Controllable Settings: (*Some or all of the settings may not be supported by your particular transmitter) - *Audio Level - *Frequency - Sleep Mode - Lock Mode - *Power Output - *Low Cut Filter - *LED On/Off - *Record/Stop Features - Simplistic design for fast and easy use - Sounds are generated dynamically, not loaded from memory - Volume control on each page for easy access *Not all remote control tones are supported by every Lectronsonics device. Lectrosonics® SM transmitters must be configured to accept remote control tones. Hold down arrow while turning on the transmitter. Then select "rc on". The original SM requires firmware version 1.5 (released 12/05) to respond to the remote. The firmware version number appears upon turning on the unit. Any tones properly received but not supported will be met with "---------" response on the transmitter screen. Lectrosonics® is a registered trademark of Lectrosonics Inc. Lectrosonics Inc. does not provide support for this app.