livetoolkit vs TASCAM MX CONNECT

Everybody working in the live concert business has experienced situations like this: You've just arrived at the venue. According to the local promoter everything should have been put up before you arrived, but it hasn't. Now it'll take an hour or more to set up the PA-System and Lighting-gear before you can start to do your actual work. All has to be done as fast as possible. You don't have time to get your laptop out of the car and working just to do some necessary calculations. Now you can just take your iPhone®, iPod touch® or iPad® and start doing your calculations with LiveToolkit. LiveToolkit helps audio technicians to make relevant calculations directly with his or her iPhone®, iPod touch® or iPad®, like: • Delay times for your PA-system: Conversion between time and distance. • Stacking distance of your subs: Conversion between frequency and wavelength. • Getting your PA-Settings into the controller: Conversion from Q-Factor to Bandwidth and back. • Setting up your controller: Limiter calculations depending on speaker capacity and amp output. • Getting the musicians tempo: Tap Tempo calculation with different note weightings. LiveToolkit helps lighting technicians to make relevant calculations directly with his or her iPhone®, iPod touch® or iPad®, like: • Getting the start address for multiple fixtures based on quantity, channels, and first address used. • Setting the DMX-address right using a DIP-Switch, or identifying the address value of a DIP-Switch. LiveToolkit helps any technicians to make relevant calculations directly with his or her iPhone®, iPod touch® or iPad®, like: • Universal useful conversion between feet and meter and lbs to kg. • Conversion between Watt, Ampere and Volt. • Calculate the voltage drop in your cable based on length and profile. • Trigonometric calculation on heights based on angle & distance. IMPORTANT NOTES: • Although good tested - this application remain a piece of Software: rockbaby engineering will not take any responsibility for any issues that may occur using LiveToolkit.

The TASCAM MX CONNECT is control software exclusively designed for system integrators/managers that allows system structuring and daily operation usage using the TASCAM MX-8A matrix mixer. Full support for daily tasks The TASCAM MX CONNECT software gives users full control of the MX-8A; from input/output configuration to mixing, routing, and digital signal processing functions. For event spaces or banquet rooms where switching routes or changing audio levels are part of the daily work, the control software allows input/output status monitoring, not to mention efficient configuration changes as well. Remote control from various places Users can either use a wired connection with a LAN cable, or make the MX-8A and the TASCAM MX CONNECT share the same network for a wireless connection. Even with having the MX-8A on the backyard room or on the corner of the room won’t stop you from monitoring or controlling it, as long as they are within the same network. • MX-8A dedicated control software made for system integrators/managers • Controls: - Input modules - Matrix mixer module - Mixes and output routing - Output modules • Allows structuring of the end-user control software "TASCAM EZ CONNECT" • Allows structuring of the wall-mount programable controller "RC-W100"