livetoolkit vs VR Mobile

Everybody working in the live concert business has experienced situations like this: You've just arrived at the venue. According to the local promoter everything should have been put up before you arrived, but it hasn't. Now it'll take an hour or more to set up the PA-System and Lighting-gear before you can start to do your actual work. All has to be done as fast as possible. You don't have time to get your laptop out of the car and working just to do some necessary calculations. Now you can just take your iPhone®, iPod touch® or iPad® and start doing your calculations with LiveToolkit. LiveToolkit helps audio technicians to make relevant calculations directly with his or her iPhone®, iPod touch® or iPad®, like: • Delay times for your PA-system: Conversion between time and distance. • Stacking distance of your subs: Conversion between frequency and wavelength. • Getting your PA-Settings into the controller: Conversion from Q-Factor to Bandwidth and back. • Setting up your controller: Limiter calculations depending on speaker capacity and amp output. • Getting the musicians tempo: Tap Tempo calculation with different note weightings. LiveToolkit helps lighting technicians to make relevant calculations directly with his or her iPhone®, iPod touch® or iPad®, like: • Getting the start address for multiple fixtures based on quantity, channels, and first address used. • Setting the DMX-address right using a DIP-Switch, or identifying the address value of a DIP-Switch. LiveToolkit helps any technicians to make relevant calculations directly with his or her iPhone®, iPod touch® or iPad®, like: • Universal useful conversion between feet and meter and lbs to kg. • Conversion between Watt, Ampere and Volt. • Calculate the voltage drop in your cable based on length and profile. • Trigonometric calculation on heights based on angle & distance. IMPORTANT NOTES: • Although good tested - this application remain a piece of Software: rockbaby engineering will not take any responsibility for any issues that may occur using LiveToolkit.

VR Mobile connects to any Vibration Research hardware device for live vibration test monitoring via an iPhone or iPad. It also contains engineering calculators, a light strobe, a noise SPL meter, and an accelerometer--all from your mobile device! FEATURES: Connect to the ObserVR1000 dynamic signal analyzer and data acquisition (DAQ) device - Set up inputs and record & monitor data - Live FFT Analysis - Use your mobile device's camera to record video in sync with your ObserVR1000 and/or GoPro® camera(s) Remotely control vibration tests running in the VibrationVIEW software - Start/stop tests - View graphs - Adjust amplitude and frequency VR Library - Complete courses, take quizzes and earn certificates on VR University - Browse articles, case studies, engineering tools, research papers, and more - Watch video tips and tech talks - Gain access to VR product manuals Max acceleration calculator - Calculate the maximum acceleration a shaker can output based on system mass Unit converter - Convert acceleration, force, mass, velocity, displacement, and more Sine calculator - Calculate acceleration, frequency, velocity, and displacement based on sinusoidal motion Shock calculator - Select the impact type (plastic or elastic) and the pulse type, and the shock calculator will calculate the remaining two values given two inputs: acceleration, impact time, velocity change, and height change Noise meter - Measure the minimum, current, and maximum decibels (dB) from your mobile device's microphone Accelerometer - Measure the minimum, current, and maximum acceleration in each of your mobile device's accelerometer axes - Zero-out acceleration to calibrate for an uneven surface Strobe light - Strobe your device's screen and/or flash LED from 1 to 30 Hz; strobing helps display objects vibrating too fast for the eye to see VR products - View VR's vibration test controllers and dynamic signal analyzers - Watch YouTube videos from VR - Visit VR's website - Browse VR's LinkedIn page