iTemblor Earthquake Simulator vs phyphox
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
iTemblor Earthquake Simulator
Explore earthquake shaking intensity by relating the acceleration you impart on your phone to the Modified Mercalli Intensity (MMI) scale. Visualize shaking in 2D or 3D seismograms, with options to filter data for realistic earthquake simulations. Primarily for educational and entertainment purposes.
- MMI scale simulation
- Seismoscope view (2D)
- Time Series view (3D seismogram)
- Gravity removal
- Low-pass filtering
- Educational and entertainment focus
Read full descriptionHide full description
Use iTemblor to explore the relationship between acceleration you impart on your phone and earthquake shaking intensity, based on the Modified Mercalli Intensity (MMI) scale. While the familiar Richter earthquake magnitude relationship (and others) scale with recorded ground movement, the MMI scale is a qualitative or observational scale of earthquake shaking intensity developed for comparing earthquake effects in locations where there are no seismographs. The Seismoscope View - The seismoscope is one of the oldest earthquake measurement devices, dating back to ancient China, and records the intensity and direction of shaking in the horizontal plane. In the spirit of the seismoscope, it’s most accurate to use this view by placing your phone on a flat surface (or hold it roughly horizontal) and to shake it horizontally. The movements you impart, plotted in 2D, are measured as acceleration in time which is then converted into MMI values using an empirical relationship between ground acceleration and MMI shaking intensity (Richter, 1958, Western United States). The Time Series View - The time series view is a traditional seismogram view that plots the accelerations you impart to your phone in 3 dimensions (x, y and z axes). You will see two traces for each axis, orange and green. The orange represents the raw acceleration data with the effects of gravity removed. The green represents the same data after the application of a low pass filter. The low pass filter is used to dampen your input to stay approximately within the frequency bandwidth of large earthquakes. The continuous time series is approximately 10 seconds long and is plotted in units of % gravity (G) The Data - iTemblor records the accelerations you impart onto your device and subtracts the effect of gravity. Then, a low pass filter is applied to constrain the recordings to stay within the bandwidth of large earthquakes (less than 10 hertz). The seismoscope view displays the fully filtered signal (equivalent to the green trace in the time series view). The time series view displays two traces. Both have gravity removed. The green trace has been low pass filtered (as described) and the orange trace has not. iTemblor is designed to provide fun and interesting correlations between the accelerations you impart on your iPhone through shaking and earthquake intensity. Efforts have been made to create generalized and realistic representations using published empirical data. Earthquakes are very complex and variable processes, therefore, iTemblor results should be viewed as approximate at best and be used for educational and entertainment purposes only.
phyphox
Unlock your phone's sensors for scientific exploration. Conduct pre-built experiments or create your own using accelerometers, magnetometers, and more. Analyze and export data in various formats for further study.
- Pre-defined experiments
- Data export (CSV, TSV, Excel)
- Web-based remote control
- Custom experiment editor
- Access to phone sensors
- Advanced analysis functions
Read full descriptionHide full description
Did you know that you are carrying a 3D magnetometer? That you can use your phone as a pendulum to measure earth's local gravitational acceleration? That you can turn your phone into a sonar? phyphox gives you access to the sensors of your phone either directly or through ready-to-play experiments which analyze your data and let you export raw data along with the results for further analysis. You can even define your own experiments on phyphox.org and share them with colleagues, students and friends. Selected Features: • A selection of pre-defined experiments. Just press play to start. • Export your data to a range of widely used formats • Remote-control your experiment through a web interface from any PC on the same network as your phone. No need to install anything on those PCs - all you need is a modern web browser. • Define your own experiments by selecting sensor inputs, defining analysis steps and creating views as an interface using our web-editor (http://phyphox.org/editor). The analysis consists of just adding two values or using advanced methods like Fourier transforms and crosscorrelation. We offer a whole toolbox of analysis functions. Sensors supported: • Accelerometer • Magnetometer • Gyroscope • Pressure • Microphone • Proximity • GPS • Camera • LiDAR/ToF *some sensors are not present on every phone. Export formats • CSV (Comma separated values) • TSV (Tab-separated values) • Excel (if you need other formats, please let us know) This app has been developed at the 2nd Institute of Physics A at the RWTH Aachen University.
Screenshots
Verdict
The clearest difference is rating: iTemblor Earthquake Simulator at 5.0 against phyphox's 4.6. iTemblor Earthquake Simulator also leads on review sentiment (100% vs 79%). phyphox's advantage is ratings volume (283 vs 1) and update cadence (every 3 months vs every 11 months). On price, ads, in-app purchases and monetization model there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Neither carries in-app purchases, so what you see is what you pay.
iTemblor Earthquake Simulator holds the better App Store score, 5.0 against 4.6. That said, the two scores are not equally well evidenced: phyphox has 283 ratings behind it against 1, so its average is the more settled of the two. Written reviews point the same way: 100% of iTemblor Earthquake Simulator's written reviews are positive against 79% of phyphox's.
iTemblor Earthquake Simulator ships an update every 11 months, phyphox every 3 months. The most recent releases landed on November 13, 2026 and November 19, 2026 respectively.
| Parameter | iTemblor Earthquake Simulator | phyphox |
|---|---|---|
| Price | Free | Free |
| Rating | 5.0 (1 ratings) — better | 4.6 (283 ratings) |
| Positive reviews | 100.0% of reviews — better | 78.7% of reviews |
| Number of ratings | 1 | 283 — better |
| Update frequency | Every 11 months | Every 3 months — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Free | Free |
| Devices | iPhone | iPhone, iPad, iPod — better |
| Requires iOS | 17.6 | 12.0 — better |
| Further details — not scored | ||
| Size | 1 MB | 19 MB |
| Age rating | 4+ | 4+ |
| Developer | Jess Taylor | RWTH Aachen University |
Customer experience
iTemblor Earthquake Simulator
phyphox
Bugs and requests
iTemblor Earthquake Simulator
Not enough reviews yet to summarise bugs or requests.
phyphox
Reported bugs
21 issues- App crashes on older devices
- Barometer not working on iOS 17.4
- Network error: Generic error
- Sound measurement curve disappears
- App crashes frequently
Show 16 moreShow fewer
- Cannot be opened on iPhone 6
- Light sensor not implemented
- Recording stops when phone is locked or app is minimized
- Green lines on screen and faded to black after using barometer sensor
- WLAN not working after using the app
- Pressure no longer displayed on iOS 17.5
- Barometer not working on iOS 17.4
- Latest version cannot be opened on iPhone 6
- Sound chronometer reset button not working
- iPad destroyed after update
- App displays Russian language by default
- Experiments not working on iPhone 7
- Magnetometer not working after update on iPhone 5s
- GPS shows 0 satellites with 6m accuracy
- App claims iPhone 11 is comparable to a low-cost tablet
- App crashes every time
Requested features
33 requests- Add infrasound detector
- More units of measurement (G-force, PSI, feet)
- NFC/RFID support
- In-app bug report feature
- Allow other sensors via USB-C
Show 28 moreShow fewer
- Ability to plug in external sensors
- Slo-mo recording with timestamps
- Add attitude sensor (roll, pitch, yaw)
- Integration with Apple Shortcuts
- Ability to record audio/dB simultaneously with other sensors
- Adjustable sampling frequency for all sensors
- Dark mode option
- Experiment editor integrated into the app
- More documentation for the editor
- Ability to form averages
- Support for older iPhones (iPhone 6)
- Add GPS satellite count display
- Add speedometer functionality
- Add Lux measurement using light sensor/camera
- Ability to play recorded audio
- Limit input for sound analyzers (dB/Hz range)
- Wi-Fi and RF module access for EMF analysis
- iWatch integration
- Improve audio generator capability
- Allow background/screen locked recording
- Add light sensor functionality
- Change units of measurement
- Add more precise measurements for static cases
- Add FFT and spectral generation for accelerometer
- Support for older devices
- Improve UI/UX for new users
- Add support for more languages
- Add a donate option
In-app purchases
iTemblor Earthquake Simulator
No in-app purchases
phyphox
No in-app purchases
Questions
Is iTemblor Earthquake Simulator free?
Is phyphox free?
Which has better reviews, iTemblor Earthquake Simulator or phyphox?
Do iTemblor Earthquake Simulator or phyphox have ads?
Which is updated more often, iTemblor Earthquake Simulator or phyphox?
Other comparisons















