RTA vs iAnalyzer

A Real Time Analyzer for the iPhone, iPad and iPod Touch. Test your speakers, tune your room, do acoustical analysis work or just have a better understanding of audio frequencies. RTA is a professional-grade acoustical analysis tool. All filters meet or exceed ANSI and IEC Class 1 specifications. Includes Octave and 1/3 Octave modes, with selectable decay times, as well as Peak Hold and true linear Average mode. *** iOS Microphones We have analyzied every iOS device, including all of the iPads, all iPhones, and iPod touches, and have created microphone compensation files that are applied automatically. You can trust the results you are getting, often within just a few dB of a far more expensive analyzer. Calibration is updated regularly, automatically, from our cloud-based calibration database. Upgrade to our iTestMic or iAudioInterface2 to bring your system up to full professional specs. *** Save and Recall Graphs You can save and recall graphs, marked with the GPS location, date & time, and your comment, as well as store the image to your photo roll. Export the data as an XLS formatted file to your computer for inclusion in reports or further analysis. *** Max and Min Bars You can also turn on resettable Max/Min bars (see image #4) to capture peaks. Double-tap to reset the bars. *** Specifications and Devices The internal iPhone mic has a noise floor near 30 dB, and if your are running iOS 6, clips around 120 dB. *** Touch GUI Fully interactive touch GUI features includes scroll up/down, pinch to zoom or compress the vertical dB scale, or swipe horizontally to get a cursor that reads out the exact dB level and frequency across the screen. To make the cursor disappear, swipe it off the graph to the left. The landscape-mode display flips 180 degrees so that you can face the internal mic in either direction. *** Overlay Curves Also included are optional noise curve overlays, in NCB, RC, PNC, NC, X-Curve and NR mode. See picture #2 for an example. Use this feature to get a quick reading on the noise levels in a room. Also includes the cinema large-room X-curve overlay. *** Calibration RTA can be fully calibrated, whether you are using it with the internal iOS microphone, or one of our professional test & measurement mic solutions. And, if you are using iTestMic, the mic calibration is transmitted directly to the app, so you are always calibrated. *** RTA or FFT? If you are wondering if you should download this app or our FFT app, check out our website, we have a page devoted to this topic. See our other acoustics and audio apps, including AudioTools.

iAnalyzer is a FFT based professional software to analyze the audio signals for iPhone, iPod Touch and iPad. After 10 years of good sales all over the world, we are glad to see that iAnalyzer has gradually become the industry standard in audio analyze field, due to it's very high quality of course. This is definitely a Must Have app for every musician or sound engineer. We also released the Mac version, you can download it from "Mac App Store". Features: -High performance software design for Real Time Analyzing(RTA) and complex graph displaying. -Works on 44K sample rate, 20~20k Hz frequency output. -FFT spectrum, Octave and 1/3 Octave result display. -Colored curve depend on the dB value. -Flex FFT size, 4K, 8K, or 16K. -Reference Pressure configurable. -2D or 3D or Mix 2D&3D display. -History result display while in 3D mode. -High precision peak frequency computation, average-error lower than 0.1%. -Auto peak frequency tracing, up to 3 peaks can be displayed simultaneously and each one be linked from text to the graph clearly. -Frequency to music scale converter, you can use iAnalyzer as a professional instrument tuner, or to test if any sound is tuneful. -Powerful synthesizer to allow you replay the audio with different speed, from 1/8 to 4x. With this feature, you can listen to your recoding very slowly. (Require iPhone 4S and later, iPad 2 and later which shipped with multiple cores processor.) -VGA output support. Sync display on your device and extern screen. (iPhone 4, iPod touch 4 and iPad required) -Current waveform display and summary waveform display. -Record at any position and red color to mark the latest recording, unlimited recording time. -Play back the recording. -Oscope Auto-Scale: Enable you to view more details for low level signal. -Snap to Peak: Find peak more easily while using measure line. -File Manager: Recording in wave format, create new files, delete exist files, etc. -Wifi Transfer and Data exporting: Download wav files with your browser, including screen shot, FFT result in txt file. -Touch in the result area to use the measure line, bordered label means where is a peak. -Move in the waveform area or touch on the bottom of the area to change the current position, iAnalyzer re-compute and update graph automatically. You can also change the position while playing. Note: -The internal mic of iPhone first generation can only works on 8K sample rate, you need head-set to achieve 44k. -Press "File" button to see the HTTP address, it is in the bottom of the window. -For more information, Please visit http://phyar.cn . How to Use: -Touch and move in the result area with one finger to use the measure line. -Touch and move in the result area with 3 fingers to rotate the 3D graph. -Touch and move in the summary waveform area to move the current position. -Tap in the scroll bar area(bottom of screen) to re-seek the current position. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: http://phyar.cn/pp/