FFT vs iAnalyzer

FFT is a high-resolution audio analysis tool for the iPhone and iPod touch. It uses the Fast Fourier Transform to analyze incoming audio, and displays a very detailed graph of amplitude vs. frequency. Use this app with the built-in iOS device microphone, or upgrade to our iAudioInterface2 or iTestMic for a complete professional solution. *** Designed for Acoustical Analysis This application has been designed for acoustics work, and so the bins have been normalized to octaves, to get a display that will show a flat line for pink noise. You can control both the level of graph smoothing and decay time, to get as much or as little detail as you require. You can also control the dB resolution of the graph, as well as the frequency range that is displayed. *** Includes Signal Generator Included in this app is the engine from our Generator app, which is a low-distortion, artifact-free signal generator. The signal generator appears as a heads-up display when you tap the icon, so you can see the graph while you adjust the generator. Generate sine waves, square waves (within limits), white noise, and pink noise, optionally in psuedo-balanced mode. All waveforms are generated in real time using high-precision algorithms. *** Cursor Readout Move your finger across the screen to get a cursor to read out exact dB levels and frequencies. *** Touch-GUI Controls Use a vertical pinch-open gesture to expand the dB scale. Use a horizontal pinch-open gesture to expand the frequency scale. *** Graph Smoothing Smooth the graph by octave, 1/3, 1/6, 1/12, or 1/24 octave. Adjust the decay time from 0.5 seconds, for a very fast fluid display, to 8 seconds, or use Peak Hold or Average mode. Average mode is a true equal-weighted average, which can run continuously. *** Peak Tracking Turn on Peak Tracking to have FFT automatically find a label the frequency of the highest peak on your graph. *** Tune the Parameters Set the FFT size from 4096 to 32k points (depending on iOS device) , or select Equal Points Per Octave mode, for high-resolution analysis, even at low frequencies. *** Calibration FFT comes calibrated for the typical iPad, iPod touch, or iPhone microphone, and you can adjust the calibration. Microphone compensation files tailored to each iOS device are automatically applied. *** Save and Recall When your analysis is complete, you can save the graph image to your photo roll to include in a report, or export the data in an XLS file. *** Display Multiple Graphs Show a recalled graph on the screen in a different color. *** Difference Mode Use a stored graph as a baseline that is subtracted from the current graph in real time. *** RTA or FFT? If you are wondering if you should download this app or our FFT app, check out our website, we have a page devoted to this topic. *** Other Audio Apps Also, check out our other great audio and acoustics apps: AudioTools, our premier suite of audio and acoustics analysis apps, SPL, SPL Graph, for recording SPL over time, RTA, RT60, Generator, and Speaker Pop.

iAnalyzer is a FFT based professional software to analyze the audio signals for iPhone, iPod Touch and iPad. After 10 years of good sales all over the world, we are glad to see that iAnalyzer has gradually become the industry standard in audio analyze field, due to it's very high quality of course. This is definitely a Must Have app for every musician or sound engineer. We also released the Mac version, you can download it from "Mac App Store". Features: -High performance software design for Real Time Analyzing(RTA) and complex graph displaying. -Works on 44K sample rate, 20~20k Hz frequency output. -FFT spectrum, Octave and 1/3 Octave result display. -Colored curve depend on the dB value. -Flex FFT size, 4K, 8K, or 16K. -Reference Pressure configurable. -2D or 3D or Mix 2D&3D display. -History result display while in 3D mode. -High precision peak frequency computation, average-error lower than 0.1%. -Auto peak frequency tracing, up to 3 peaks can be displayed simultaneously and each one be linked from text to the graph clearly. -Frequency to music scale converter, you can use iAnalyzer as a professional instrument tuner, or to test if any sound is tuneful. -Powerful synthesizer to allow you replay the audio with different speed, from 1/8 to 4x. With this feature, you can listen to your recoding very slowly. (Require iPhone 4S and later, iPad 2 and later which shipped with multiple cores processor.) -VGA output support. Sync display on your device and extern screen. (iPhone 4, iPod touch 4 and iPad required) -Current waveform display and summary waveform display. -Record at any position and red color to mark the latest recording, unlimited recording time. -Play back the recording. -Oscope Auto-Scale: Enable you to view more details for low level signal. -Snap to Peak: Find peak more easily while using measure line. -File Manager: Recording in wave format, create new files, delete exist files, etc. -Wifi Transfer and Data exporting: Download wav files with your browser, including screen shot, FFT result in txt file. -Touch in the result area to use the measure line, bordered label means where is a peak. -Move in the waveform area or touch on the bottom of the area to change the current position, iAnalyzer re-compute and update graph automatically. You can also change the position while playing. Note: -The internal mic of iPhone first generation can only works on 8K sample rate, you need head-set to achieve 44k. -Press "File" button to see the HTTP address, it is in the bottom of the window. -For more information, Please visit http://phyar.cn . How to Use: -Touch and move in the result area with one finger to use the measure line. -Touch and move in the result area with 3 fingers to rotate the 3D graph. -Touch and move in the summary waveform area to move the current position. -Tap in the scroll bar area(bottom of screen) to re-seek the current position. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: http://phyar.cn/pp/