iBend Pipe vs Electrician's Helper
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
iBend Pipe
This professional conduit bending calculator helps electricians make accurate bends quickly and efficiently, reducing material waste. It offers a wide range of bend calculations with instant results and practical measurements, including a built-in level for precision.
- Conduit bending calculations
- English/Metric measurements
- Offsets, saddles, and 90° bends
- Compound bends around obstructions
- Built-in level
- Customizable bender profiles
- Fractional measurements
Read full descriptionHide full description
iBend Pipe — Bend It Right the 1st Time iBend Pipe is a professional conduit bending calculator designed to help electricians make accurate bends faster and reduce wasted material. Whether you're bending a simple offset or laying out a complex compound bend around an obstruction, iBend Pipe gives you the information you need to bend it right—the first time. CONDUIT BENDING CALCULATORS Calculate the following bends using English or Metric measurements: • Offsets — bend toward or away from an obstruction • Rolling Offsets — bend toward or away from an obstruction • Parallel Offset Adjustments • 3-Bend Saddles • 4-Bend Saddles • Segmented Bends • Concentric 90° Bends • 90° Bends • Back-to-Back 90° Bends • Kicked 90° Bends • Compound 90° Bends around round obstructions • Compound 90° Bends around square obstructions • Compound 90° Bends around rectangular obstructions FAST, ONE-SCREEN CALCULATIONS Enter your measurements and see results update instantly. There's no need to work through multiple screens just to get a measurement. iBend Pipe is designed to keep the calculation and results visible so you can work quickly and efficiently. Large, easy-to-read measurements make the app practical to use on the job. ACCURATE, PRACTICAL RESULTS iBend Pipe goes beyond basic bending multipliers. Centerline bending radius calculations are available for greater accuracy, and bends automatically account for shrink so you don't have to do the math yourself. Want to know where a number came from? On the basic bend screens, a step-by-step breakdown shows exactly how each result was calculated, with fractions. Pre-position your bends, plan your layout, and get the information you need before you start bending. What's faster—bending it twice or bending it right the first time? BUILT-IN LEVEL Tap the Level button on any calculation to check your bend angle as you bend. Your calculation's bend angles are loaded in as targets, and the level shows you when you've hit the angle, so you don't have to switch between tools. BENDER PROFILES iBend Pipe includes more than 330 bender and conduit combinations from manufacturers including Greenlee, Klein, IDEAL, Milwaukee, Gardner Bender, Current Tools and iTOOLco. Find your bender quickly by filtering by size, type, material and manufacturer. You can also customize or modify profiles to match the benders and conduit you use in the field. FRACTIONS, NOT JUST DECIMALS Enter measurements as fractions instead of converting everything to decimals. The keypad replaces the old value as soon as you start typing, so entering measurements is quick. Get your results in practical measurements you can use on the job. iPHONE AND iPAD iBend Pipe works on iPhone and iPad. On larger screens, many calculations show the diagram and inputs side by side. BUILT FOR ELECTRICIANS iBend Pipe is for the electrician who takes pride in their work. If you're the person other electricians come to when they have a difficult bend, this app is for you. If you want less wasted conduit in the bone pile, this app is for you. If you can write your name in conduit, this app is definitely for you. From a first-year apprentice to a seasoned journeyman, iBend Pipe is designed to save time, reduce wasted material, and make difficult conduit bends easier to plan. Bend it right. The first time. Thanks for all the great reviews! If you have questions or suggestions, contact me at: support@ibendpipe.com
Electrician's Helper
This app simplifies electrical work by providing quick access to electrical codes and performing complex calculations for installations. It helps electricians find conductor ampacity, calculate voltage drop, determine box fill, and size raceways, among many other essential functions.
- 3 phase delta and wye circuit calculations
- Conductor ampacity lookup (NEC/CEC)
- Voltage drop calculation
- Box fill calculation
- Raceway fill and sizing
- Motor calculations
- Transformer calculations
Read full descriptionHide full description
Electrician’s Helper will take the hassle out of looking up electrical codes and doing complex calculations for installations. With Electrician’s Helper you can... ● Calculate voltage, current and power in 3 phase delta and wye circuits. ● Find the ampacity of a conductor as per the NEC and CEC tables. ● Calculate the voltage drop in a line based on length, size, current and temperature. ● Find the total box fill by entering the size and number of conductors, straps and clamps. ● Find the maximum number of conductors allowed in a particular size raceway based on NEC and CEC rules. ● Determine what size raceway is needed for a bundle of conductors. ● Find the maximum bend radius of a conduit. ● Find the maximum capacitor kvar for a motor and the current reduction obtained. ● Find the motor current, heater current, breaker required, wire size, starter and conduit size for a particular 3 phase motor. ● Find the full load current of an induction, squirrel cage, and synchronous motor. ● Find the locked rotor current of a single or 3 phase motor. ● Estimate the Maximum Pull Tension. ● Calculate voltage, current and kVA of single and three phase transformers. ● Do basic ohm’s law calculations. ● Find decimal equivalents of fractions. ● Convert temperature scales. ● Look up connector configurations. ● Look up NEC tables 315.60(C)(1-20) Tested with iOS 16.6 thru iOS 26.3 Please note that this is a calculator for codes used in the NEC and CEC. It is not a replacement for the code books.
Screenshots
Verdict
iBend Pipe and Electrician's Helper both sit at 4.3 stars, but that hides the real split: 81% of iBend Pipe's written reviews are positive against 48% of Electrician's Helper's. iBend Pipe also leads on price ($5.99 vs $12.99) and update cadence (every 2 weeks vs every 3 months). On rating, ads, in-app purchases and monetization model there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
iBend Pipe costs $5.99 and Electrician's Helper $12.99 up front. Neither carries in-app purchases, so what you see is what you pay.
On the App Store both sit at effectively the same score — 4.3 for iBend Pipe against 4.4 for Electrician's Helper. That said, the two scores are not equally well evidenced: iBend Pipe has 120 ratings behind it against 13, so its average is the more settled of the two. Written reviews are what separate them: 81% of iBend Pipe's written reviews are positive against 48% of Electrician's Helper's.
iBend Pipe ships an update every 2 weeks, Electrician's Helper every 3 months. Both last shipped on November 16, 2026.
| Parameter | iBend Pipe | Electrician's Helper |
|---|---|---|
| Price | $5.99 — better | $12.99 |
| Rating | 4.3 (120 ratings) | 4.4 (13 ratings) — better |
| Positive reviews | 81.3% of reviews — better | 47.8% of reviews |
| Number of ratings | 120 — better | 13 |
| Update frequency | Every 2 weeks — better | Every 3 months |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Paid |
| Best chart rank | #13 — better | — |
| Devices | iPhone, iPad, Apple Watch — better | iPhone |
| Requires iOS | 26.0 | 26.0 |
| Further details — not scored | ||
| Size | 40 MB | 29 MB |
| Age rating | 4+ | 4+ |
| Developer | Francisco Alcala | Sam Virgillo |
Customer experience
iBend Pipe
Electrician's Helper
User reviews
iBend Pipe
From 120 App Store ratingsWhat we love
- 🚀 Saves significant time on job sites
- 📐 Accurate calculations for complex bends
- 👍 User-friendly interface and intuitive design
- 💡 Comprehensive bend types (offsets, saddles, kicks, rolls)
- 🎓 Excellent tool for apprentices and learning
Room to improve
- 🐛 Limited support for rigid conduit (EMT-focused)
- 🐛 Greyed out options without clear explanation
- 🐛 Apple Watch compatibility issues and crashes
- 🐛 Missing app icon after purchase
- 🐛 Inconsistent bender/conduit size detection
Electrician's Helper
From 13 App Store ratingsWhat we love
- 👍 Very helpful app
- 👍 Great reference tool
- 👍 Indispensable for field calcs
- 👍 Quick and easy calculations
- 👍 Worth the money
Room to improve
- 👎 Conduit fill calculator issues
- 👎 Voltage drop calculator crashes
- 👎 App not working after upgrades
- 👎 Not compatible with iOS 9
- 👎 App crashes or freezes
Bugs and requests
iBend Pipe
Reported bugs
8 issues- Apple Watch app crashes
- Missing app icon in app library after purchase
- Segment bend calculations producing incorrect developed length
- 4-point saddle measurements (ABCD) potentially inaccurate
- Step-by-step instructions removed in recent update
Show 3 moreShow fewer
- App becomes unresponsive with certain calculations
- Bender type selection not retained between sessions
- Incompatibility with Android version features on iOS
Requested features
17 requests- Apple Watch compatibility and offset calculator
- Support for rigid conduit calculations
- Metric system measurements
- Multi-bend layout (offset + 90 + kick in one stick)
- Parallel offset calculations for different pipe sizes
Show 12 moreShow fewer
- Pipe spacing calculations for panel entry
- Gain calculations for deducts
- Conduit shrink information
- 3-point saddle with step-by-step instructions
- Support for larger pipe sizes (2", 4" etc)
- Hickey bender calculations
- Parker and Swagelok crank bender support
- Hydraulic bender support
- Front of shoe adjustment for table benders
- Ability to select bender and conduit size each time
- Simpler/faster calculation mode option
- Detailed visual descriptions and pictures for bending techniques
Electrician's Helper
Reported bugs
10 issues- Voltage drop calculator crashes when selecting number of phases
- Conduit size calculator not working
- Crashes when selecting conduit in conduit fill calculator
- App does not work with iOS 9
- App locks or freezes screen with new OS upgrade
Show 5 moreShow fewer
- App will not open with iOS 9
- App keeps crashing
- No link for support on support page
- Back button issue in conduit fill
- Cannot switch out of conduit fill without closing app
Requested features
19 requests- Add single phase motor applications
- Add 208 volt system data
- Add wire sizing for PV installations
- Add custom voltages
- Add arc flash distance calculation
Show 14 moreShow fewer
- Add ground fault calculation
- Add switch task to conduit fill
- Add bare wire option to conduit fill
- Add 600 volt info
- Add metric support
- Add CEC tables and code
- Add 600V option
- Add switch task to conduit fill
- Add bare wire in conduit fill
- Add 208v sys data
- Add low voltage/ethernet connections cheater
- Add option to change wire size diameter and inner conduit diameter for conduit fill
- Add insulation option for conduit fill
- Separate NEC and CEC apps
In-app purchases
iBend Pipe
No in-app purchases
Electrician's Helper
No in-app purchases
Questions
Is iBend Pipe free?
Is Electrician's Helper free?
Which has better reviews, iBend Pipe or Electrician's Helper?
Do iBend Pipe or Electrician's Helper have ads?
Which is updated more often, iBend Pipe or Electrician's Helper?
Other comparisons















