Exposure Calculator vs LightStop

Takes the guesswork out of what shutter speed to use. Ever struggled with an exposure meter or the camera's auto exposure system and found that it just cannot seem to determine the correct shutter speed? I have and that is why this App was written. There are tables and formulae to help you to work out the shutter speed for yourself, but that's not easy. This App takes some simple information about the lighting conditions, the f-stop of the camera and the ISO rating being used and calculates what the correct shutter speed should be. It is that simple. If you have used the pre-calculated tables before you might be suprised by the answers this App gives you but, believe me, I have implemented the formulae and the pre-calculated tables are approximations (sometimes rather wild ones). The tables do not include all f-stops, the tables do not take account the different ISO values cameras can be set to. This App does. This App takes this information and presents it in an easy to use form. Just type in the f/stop value using the keypad, type in the ISO rating using the keypad and then select the applicable lighting conditions from the four lighting condition types: Daylight, Twilight, Night and Indoors. Each has a range of Exposure Values to select from. The App then calculates what the effective EV value is (given the ISO rating) and so can calculate what the actual shutter speed should be. It also shows the applicable row from the standard tables for the EV. Depending on the ISO rating being used the Exposure value selected from the list can be increased or decreased e.g. if the light is low and the EV is -3 but you are using ISO 800 then the effective Exposure value is zero (ISO 800 counts as +3 to EV) the shutter speed needs to match this value not that selected from the standard lighting condition values. The tables only show some of f/stop values. For example the tables show f/2.0 and f/2.8 but you might have the camera set to f/2.4. Well it is possible to calculate the exact value so this is what the App does. Coupled with ISO values that do not generate exact EV numbers this value can show you the true value you should be attempting to use. An ISO of 250 adds +1.32 to the EV value. It is a log2 scale. Now you may not be able to set you camera to the exact value given but it does give you a much better idea of the real shutter speed required rather than trying to guess from the tables (which are calculated on a logarithmic scale and are approximations). By being able to set the ISO to 250 or 500, etc this App is can calculate the real EV value. If you set the ISO to 1000 then any EV value selected needs to have approximately 3.3 added to it to give the correct EV value. So if the selected EV is 6 then the effective EV with this ISO is actually 9.3. But there is no row for 9.3 in the standard tables and it does make a difference. If the camera is set to f/3.5 then the closest row in the table is for EV9 and f/2.8 (1/60th of a second) or f/4.0 (1/30th of a second). So do you err towards 1/30th or 1/60th. Well this App actually calculates the exact value and this shows as 1/52nd of a second. Generally a camera cannot be set to this but it can be set to 1/50th so I would try that and then maybe 1/60th and maybe 1/40th. The calculation comes out as 1/50th because the EV is not 9 it is 9.3 and therefore with the ISO at 1000 everything must be treated as brighter and so less exposure is needed. Being able to see the exact value to use is even more use when long exposures are needed. The standard tables get very vague for low light conditions i.e. EV -6 for f/22 is 64 minutes and for f/32 it is 128 minutes (over an hour more). So if you are using f/28 how many minutes at ISO 1250? Well the answer is 66.9 minutes which is much shorter than you might have guessed.

LightStop is a professional lighting calculator built for cinematographers, gaffers, electricians and film students. Calculate required illuminance from camera settings, check verified fixture photometrics, apply gels and diffusion, compare fixtures side by side, build your lighting truck and estimate power loads for EU and US sets. Designed for real film work, LightStop helps you understand exposure, output, distance, modifiers and power in one clean, practical tool. FEATURES • Lux / foot-candle exposure calculator Calculate required light levels from ISO, frame rate, shutter angle, T-stop, ND and camera filters. • Verified fixture catalog Browse real fixture photometric data from manufacturer sources and technical documentation. • Fixture detail calculator Adjust distance, output mode, CCT, gels and diffusion to estimate lux, foot-candles, exposure and beam size. • Estimated CCT with gels Apply CTO / CTB filters and see the estimated resulting color temperature using mired shift calculations when data is available. • Compare fixtures Compare 2–4 fixtures at the same distance and modifiers, including output, T-stop, watts, beam diameter and stop difference. • My Truck Create lighting packages, add fixtures, set quantities, favorites and nicknames. • Power View Estimate total load, current, phases and fixture distribution for EU and US power systems, including 230V, 120V, split-phase and three-phase setups. • Metric and imperial workflow Switch between meters / feet and lux / foot-candles. LightStop is made for set planning, pre-production, teaching and fast technical checks on location. NOTES Photometric values may vary depending on fixture condition, lamp age, voltage, optics, modifiers, firmware, beam angle, accessories, calibration and manufacturer measurement conditions. Power View is an estimation tool for planning only. Always confirm electrical loads, distribution and safety with a qualified electrician or gaffer according to local regulations. Terms of Use: https://lightstop.app/#terms Privacy Policy: https://lightstop.app/#privacy