Comparison

MIDI Bagpipes Control Surface vs VAMonoMkII

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

MIDI Bagpipes Control Surface

This app acts as a MIDI control surface for iPad, simulating Irish/Scottish bagpipe fingerings. It allows you to play external MIDI synthesizers or other MIDI apps, offering distinct fingering modes for Uilleann and Highland pipes. It does not produce sound on its own.

Highlights
  • Irish/Scottish bagpipe fingering simulation
  • MIDI control surface for external synths
  • Uilleann and Highland fingering modes
  • Independent MIDI channels for chanter and drones
  • Optional finger vibrato
  • Adjustable drone transposition
Read full description

This app is a Irish/Scottish Bagpipes fingering based MIDI control surface for the iPad that can be used to play your hardware MIDI synthesizer/sampler modules or other MIDI apps. The chanter fingerings are based on either those used for the Irish Uilleann or Scottish Highland bagpipes. The app doesn't produce any sound on its own, it is designed for playing hardware and software VST-style MIDI synthesizers via a CoreMIDI compatible interface connected to the dock connector or virtual MIDI instruments like Roland Sound Canvas for iOS, Universal Piper, or Sonosaurus ThumbJam running on your iPad. The app supports sending data on two independent MIDI channels, one for the chanter and the other for the drones. IMPORTANT: Since this app requires as many as 9 fingers on the screen at the same time, before playing, disable "Multitasking Gestures" on your iPad (in the iPad Settings app, under the General section, turn the Multitasking Gestures switch to the off position). Choose between Uilleann and Highland chanter fingerings using the selector below the drone puck. Touch the '?' on the upper left corner for the on-screen help labels. For Uilleann fingerings, you can choose whether the back-D note plays when the Back-D switch is touched (Open mode) or released (Closed mode). Closed mode matches the real Uilleann chanter. Touch the drone puck to start/stop the drones. For the Highland pipes, you'll want to set the drone transposition two semitones higher than the chanter Using Uilleann Chanter Fingering To play the chanter, touch the three holes of the left side of the chanter starting with the tips of your left index, middle, and ring fingers. Next, touch the four holes on the right side of the chanter with the tips of your right index, middle, ring, and little fingers. Touch the green "Octave" bar on the left side with your left little finger to play the notes one octave higher. Optional finger vibrato may be done by touching holes below the main closed holes used for a note. Using Highland Chanter Fingering Touch the bar at the bottom of the screen with your left thumb. It represents the hole on the back of the chanter for the highest note and must be covered for other lower notes to play. The app uses chanter fingerings based on those for the Highland pipes. Next, touch the left half of the chanter starting with the tips of your left index, middle, and ring fingers. Finally, touch the right half of the chanter with the tips of your right index, middle, ring, and little fingers. Touch the blue "Back-D" bar at the bottom left center with your left thumb to play the second octave "Back-D" selectable on either a press or release. (Uilleann chanter mode only) Touch the red "Stop" bar at the bottom right center with your right thumb to stop the chanter sound for staccato techniques. (Uilleann chanter mode only) Touch the purple "Bend" bar on the lower right with your right little finger to bend the pitch or play finger vibrato. (Uilleann chanter mode only) You may select the MIDI channel, attack velocity and volume for the chanter and drones independently using the sliders at the top of the screen. The entire range may be transposed up or down up to one octaves (zero transpose is "C") in semitone increments using the chanter and drone transpose sliders. Use the "Transmit MIDI Port" switch to choose between "Omni" sending MIDI data to all CoreMIDI apps or "Virtual Port" sending to a named CoreMIDI virtual output port. When the "Virtual Port option is selected, MIDIPIpes will show up as an input option in apps that support virtual ports like Universal Piper, and Sonosaurus ThumbJam. "Omni" mode is selected by default. All MIDI settings are saved when the app quits and restored the next time it is run. Touch the 'Shhh' icon at the lower left to quiet any "stuck" notes if they occur. Be sure to visit the AppCordions.com website for MIDI setup information and demo videos!

About

VAMonoMkII

This app is a virtual analog bitimbral synthesizer for iOS and macOS. It offers two 8-voice synthesizers with extensive modulation, classic analog filter models, and built-in effects. Create and export music with its sequencer and audio visualization tools.

Highlights
  • Virtual analog bitimbral synthesizer
  • Dual oscillators with variable waveforms
  • Transistor Ladder and Sallen-Key filter models
  • Built-in effects suite (delay, reverb, chorus, etc.)
  • 16-bar sequencer with piano roll and automation
  • Audio Unit Extension (AUv3) support
  • Ableton Link and MIDI 2.0 compatibility
Features
Read full description

VAMonoMkII is a virtual analog bitimbral synthesizer for iPhone, iPad and Mac. It features two 8 voice synthesizer, effects, sequencer and audio visualization tools. It operates as a stand alone or as an AudioUnit Extension (AUv3). Stand Alone supports Ableton Link, MIDI and audio file export. The bitimbral synthesizer consists of two synthesizer, which features two oscillators, two ADSR envelopes, resonant high pass and low pass filter and an amplifier per voice. The oscillators features continuously variable wave shape and wide variety of modulation. The filters are modeled on Transistor Ladder filter circuit and the Sallen-Key filter circuit for classic analog sound. The Effects include delay, chorus, flanger, reverb, eq and compressor. The sequencer features piano roll and parameter automation editor to program 16 bar pattern per clip. Project files can be saved in iCloud Drive, so that the project can be accessed from iPhone, iPad or Mac. - Main Features - Virtual analog bitimbral synthesizer Two type of Lowpass filter, Transistor Ladder model and Sallen-key model. Maximum 8 voice polyphony. it depends on performance of the device it is running. Operate as monophonic or polyphonic. Patch points for modulation. Support MIDI 2.0 User Interface built by SwiftUI for improved performance. Built-in Sequencer. 16 bar patterns per clip. Total 8 clips. Piano Roll and Parameter automation. Support Audio Unit Extension (AUv3) Works on iPhone, iPad and Mac. Support iCloud Drive to share project files between the platforms. Audio Export. Linear PCM format (AIFF, WAV and CAF) and compressed format (AAC) Support Ableton Link, Bluetooth MIDI, MIDI In / Out. 360 bitimbral presets and more. - System Requirements - A13 Fusion or above is recommended. AudioUnit Extension (AUv3) requires host application which support AudioUnit Extension. AudioUnit Extension is supported by Apple Logic and Apple Garage Band on iOS and macOS. For any other DAW, it depends on the application and some of them don’t support AudioUnit Extension. Sound may be distorted if CPU of the device doesn't have enough power. If it happens reduce number of voices.

Screenshots

VAMonoMkII4 screens

Verdict

The call

The clearest difference is rating: VAMonoMkII at 5.0 against MIDI Bagpipes Control Surface's 2.0. VAMonoMkII also leads on device support (3 vs 1) and price ($3.99 vs $4.99). MIDI Bagpipes Control Surface's advantage is update cadence (every 3 weeks vs every 11 months). On review sentiment, ratings volume, ads and in-app purchases there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

MIDI Bagpipes Control Surface costs $4.99 and VAMonoMkII $3.99 up front. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

VAMonoMkII holds the better App Store score, 5.0 against 2.0. Both are backed by a comparable volume of ratings — 2 and 4 respectively. Written reviews split almost evenly too, at 0% and 0% positive.

UpkeepUpdate frequency

MIDI Bagpipes Control Surface ships an update every 3 weeks, VAMonoMkII every 11 months. The most recent releases landed on November 6, 2026 and November 17, 2026 respectively.

Scorecard4 real differences · 6 level
MIDI Bagpipes Control Surface versus VAMonoMkII: the parameters behind the verdict, then further details
ParameterMIDI Bagpipes Control SurfaceVAMonoMkII
Price$4.99$3.99 — better
Rating2.0 (2 ratings)5.0 (4 ratings) — better
Positive reviews0.0% of reviews0.0% of reviews
Number of ratings24 — better
Update frequencyEvery 3 weeks — betterEvery 11 months
AdsNoNo
In-app purchasesNoNo
MonetizationPaidPaid
DevicesiPadiPhone, iPad, Mac — better
Requires iOS16.616.6
Further details — not scored
Size21 MB16 MB
Age rating4+4+
DeveloperMichael EskinRyo Togawa

Customer experience

MIDI Bagpipes Control Surface

All ratings2 ratings
Positive0.0%
Neutral50.0%
Negative50.0%
Written reviews4 reviews
Positive0.0%
Neutral25.0%
Negative75.0%

VAMonoMkII

All ratings4 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews1 reviews
Positive0.0%
Neutral100.0%
Negative0.0%

In-app purchases

None

MIDI Bagpipes Control Surface

No in-app purchases

None

VAMonoMkII

No in-app purchases

Questions

Is MIDI Bagpipes Control Surface free?
MIDI Bagpipes Control Surface costs $4.99, with no in-app purchases.
Is VAMonoMkII free?
VAMonoMkII costs $3.99, with no in-app purchases.
Which has better reviews, MIDI Bagpipes Control Surface or VAMonoMkII?
VAMonoMkII is rated higher. MIDI Bagpipes Control Surface averages 2.0 out of 5 from 2 ratings, while VAMonoMkII averages 5.0 from 4 ratings.
Do MIDI Bagpipes Control Surface or VAMonoMkII have ads?
Neither MIDI Bagpipes Control Surface nor VAMonoMkII shows ads.
Which is updated more often, MIDI Bagpipes Control Surface or VAMonoMkII?
MIDI Bagpipes Control Surface ships an update every 3 weeks, and VAMonoMkII every 11 months. Most recently, MIDI Bagpipes Control Surface was updated on November 6, 2026 and VAMonoMkII on November 17, 2026.

Other comparisons