Gira HomeServer/FacilityServer vs Clever Config

Gira HomeServer/FacilityServer A simple and elegant way of operating complex building technology while away or from any room at home: with the Gira HomeServer app, you have everything under control – with an iPhone, iPod touch or iPad, via GSM, UMTS or WLAN, from outside or inside the building. The app acts as a client, communicating with the Gira HomeServer or FacilityServer: the Gira Interface displays all functions clearly and concisely and allows quick access to the building. The display is either horizontal or vertical and can be modified by simply rotating the device. Various profiles allow controlling different buildings such as a personal residence or company as well as various views of one building. In this way, different functions can be controlled from outside the building than from inside. Different views can also be created for users. The most important features: Main menu The main menu displays all building functions. Date, time, current temperature and active functions can be viewed via the status bar. The jump back to the main menu is via the lower navigation bar. Room list All rooms of a property are assigned by floor. The overview of all applications installed in a room can be opened by touch. Room functions The functions within a room and their status are recognizable at a glance and can be operated with a touch. For more complex functions such as the heating control system, a pop-up menu is opened. If the device is rotated by 90°, the horizontal format opens a further view of the time clock functions. Time clock A function can be adapted to personal requirements via a range of filter functions; random values are also possible in this way. Diagrams Diagrams enable the clear display of detected and evaluated consumption data by year, month, week, day or hour. If the unit is turned by 90°, the last active diagram appears in the horizontal format. Temperature differences, for example, can be visualised via multi-touch. Messages Alarm and fault messages, measured values and states of the various components integrated in the system are clearly displayed. Weather data The data from the weather station installed on the building such as wind speed, precipitation and temperatures are available at a glance. Energy generation and fill levels The energy generation of a photovoltaic system can be viewed just as easily as the fill level of a cistern for rain water. Camera Cameras on the grounds can be called up with one operational step. Important note This app can only be used in connection with a Gira HomeServer or FacilityServer in a KNX/EIB installation. A list of specialists for intelligent building technology is available at www.gira.com/en/bezugsquellen

This JUNG app works on the basis of Bluetooth Low Energy. It is therefore independent of WLAN or networks and thus guarantees secure handling. Bluetooth Low Energy makes the connection setup and data transmission between the smartphone and the JUNG LB Management both fast and convenient. The app enables the operation of device functions, the display of values and states as well as the creation of time programs. Settings can simply be carried out, transferred from device to device and imported from other installations – this makes the commissioning considerably easier. If the device configuration and the device coupling is disabled with a password, they are protected against unwanted access. Operation made easy: the lighting is switched on or off or dimmed to the required brightness at the touch of a finger. Blinds and shutters are raised or lowered or set in the required position. Even the slat angle can be easily adjusted. That brings convenience to daily life. Good to know: if updates are available for the Clever Config app, they can be downloaded by the customer automatically from the App Store. The software for LB Management Bluetooth devices can also be updated via the app.