SatFinder vs e2Remote Pro

With SatFinder you can adjust your satellite antenna in a few seconds and with 4 simple steps: STEP 1 - CHOOSE YOUR ANTENNA Choose one of the four different antenna designs: - Offset antennas (the most common, is slightly oval, the LNB is not in the center). - Special design (e.g. Oblong shaped Offset antenna, Multifeed antenna) - Parabolic antenna (LNB is located in the center of the reflector, usually larger than 100cm) - Flat or planar antenna (small, camping antennas) If you have an offset antenna, enter the height and width of the antenna. If your antenna has a special shape, enter the offset angle and the size of the satellite antenna. You can find the offset angle in the manual of your satellite antenna. For parabolic antennas it is sufficient to enter the antenna diameter. With a flat antenna you do not have to set anything. If you know the exact antenna name, check if your antenna is already in the database. Tip: Press the wizard button to measure the size of the satellite antenna using the iPhone camera and LiDAR scanner. STEP 2 - CHOOSE YOUR SATELLITE To quickly and easily select a suitable satellite, simply press the "AUTO" button. The SatFinder will now automatically search for satellites that are in your reception area and that offer TV or radio stations in your language (the language setting of your iPhone will be selected). The stars (1-10) shown in the table result from the number of radio and TV channels offered and the reception strength at your location. If you want to receive a special satellite, switch off "AUTO": Now you can simply scroll through the table and select the satellite. Faster is the search function - just enter the name of the satellite, the channel or the orbit position. You can also reduce the number of table entries by hiding satellites that are not available at your location or do not broadcast in your language. With the button "Channel Info" you can check which channels the selected satellite is currently broadcasting - including all channel parameters for your satellite receiver. STEP 3 - CHECK OBSTACLES For a smooth satellite reception, there must not be any obstacles between the satellite and your satellite antenna. You can check this with the "View" function. Simply aim at the satellite and watch the signs (GREEN - no obstacle, RED - caution, free view may not be given). Tip: Press the button for the assistant to activate the voice output. STEP 4 - ADJUST ANTENNA In the menu item "Align" different graphics appear depending on the selected antenna type. If you use an offset antenna, you have to adjust the azimuth and elevation separately. With planar or parabolic antennas the adjustment of the angles is done together. Before you press the "Start" button, a video clip shows how to position your iPhone at the antenna. Tip: Press the button for the assistant to activate the voice output. STEP 5 - FINE TUNING If necessary, you can optimize the reception of your satellite system. The SatFinder provides you with the function "FineTuning". To use this function, you need a second iOS device. One device serves as a camera; the second device as a monitor. Simply place an iPhone in front of your reception screen and observe changes in picture quality while slightly rotating or tilting your satellite antenna. With the FineTuning feature, you'll have visual contact with your TV even when you're out of sight. THAT'S IT. YOU SHOULD NOW BE ABLE TO ENJOY INTERFERENCE-FREE SATELLITE RECEPTION... Note: Satellite antenna tuning is only available on iOS devices with LiDAR sensor (e.g. iPhone 12 Pro).

You have a Dreambox or any other Set Top Box (Sat - Receiver) with Enigma 2, then read through the features. This app can replace the remote control completely and awaits you with some Specials. * Why another version of this app: e2Remote Pro = e2Remote + e2Remote HD + Streaming All other apps will continue. * What you need is: A set-top-box with Enigma2 And a network connection to the box. * Streaming: Additional streaming support with one of these Apps: Oplayer(Lite), BUZZ Player, aceplayer or good player. * Full bouquet editor: Manage bouquets using webbouqueteditor plugin. *Full package manager: list, install, update and remove plugins. * Profiles: Manage a unlimited number of receiver connections with autoswitch. * Timer: Add, modify, delete, cleanup. * Channel list: Full channel list for each bouquet, search channels, show EPG for each channels, list now + next event or 3 different primetimes, automatically load channel picons, zap to channel, stream to iDevice. * Multi EPG: 2 different Multi EPG Modes. * EPG info: Full information for EPG entry, add entry as timer, post entry on Facebook, add as twitter tweet, search entry on IMDb. * Movie list: List and delete recorded movies, search movie on IMDb, stream movie to iDevice. * Remote control: Full featured remote control with all keys and several modes, box control (standby, power off, ...). * Tools/settings: App statistics, take screenshots, show detailed box informations, sleeptimer settings, autotimer plugin support, epgrefresh plugin support, VPS plugin support. * Picons: Manual picons using iTunes, automatical picon download, picon download from box and picon download from dropbox. * App Languages: English, Deutsch, Français, Italiano, Español, Português, Polski, Türkçe, Svenska, Dutch, Russia. Testet with DM8000, DM7020HD, DM800(se), UFS910,UFS912, UFS922,TF7700, Atevio 700/7000, VU+ (xx) and ET9xxx. For suggestions or if the app is not even doing what You want, then please send an email as soon as possible with an exact description of the bug, because only then we can fix the error. Or just under http://www.myappsolut.de. The recession here in the App Store we cannot answer, unfortunately. In addition, a support for older versions of the app is not possible.