ioTouch2 Lite vs Point Load Test

'ioTouch2 Lite' is a Lite edition of 'ioTouch2'. "ioTouch2" is an iPhone/iPod touch application which enables you to monitor and manipulate PLC(Programmable Logic Controller*1) devices easily, without the expert knowledge. *1 PLC - A digital computer used for control of machinery on factory assembly lines, etc. = The difference from 'ioTouch2 Pro' 'ioTouch2 Lite' has a restriction time (30 min. in a day) to communicate with real plc. There are Add-on items for each PLC provider. If you bought an item, it can connect to your selected provider's PLCs. More details to see http://iphone.itosoft.com/iotouch2/diff_pro_lite = What It Changes In general, there must be at least 2 people for checking I/O at the startup of a device; one for switch-on, another for monitoring. With ioTouch, you can do this by yourself, because you can monitor the device's change at the same time you are switching it, with iPhone/iPod touch in hand. Because full knowledge of PLC is not required to use ioTouch2, an assembler can adjust machines through ioTouch2. = Easy To Use A device's status appears as a lamp. You can manipulate it by pushing buttons. It's really easy to use. = How To Connect PLC devices ioTouch2 connects PLC devices(*2) by Wi-Fi, so that you can take it with you easily. If your PLC devices support Ethernet, you just need to build a Wi-Fi. Otherwise ioTouch2 can connect them through a Serial-Ethenet converter. "PLC Share" is no longer necessary. *2 ioTouch2 supports most of KEYENCE, MITSUBISHI, YOKOGAWA and OMRON devices. More details to see http://iphone.itosoft.com/iotouch2/spec . ===================================== --- C A U T I O N --- ioTouch2 can switch on/off devices. If you need to interlock devices controlled by PLC, you need to configure that on PLC. If there are some devices of which you are not sure about safety, please set the permission of them readonly and don't use that function. =====================================

*NOTE: This is a new version of the PLT app. The old version will remain listed in the meantime but will be removed soon. The Point Load Test Application was designed to be used in conjunction with a GCTS PLT-2W. This application allows the user to easily perform tests and record data by connecting to a PLT device via Bluetooth. The device will output load and displacement from a pair of sensors, which will be read by the app and used to calculate point load test results. The app allows two-step calibrations of these readings, and also can obtain pre-loaded calibration factors from within the PLT-2W. Using this application, specimen measurements can be made with ease. By simply placing the specimen in the apparatus as shown in the application and applying a small load, the application will automatically calculate the dimension of the specimen in that axis. This app can be used with diametral, axial, or irregular specimens. In addition, the application can be set to reuse certain dimensions, so if a core sample is used, the application can be set to use the same diameter for each specimen tested. The operator can also define a custom equation for determination of the unconfined compressive strength from the point load strength index as calculated by the test. The application will automatically graph the load versus equivalent core diameter and automatically calculate the unconfined compressive strength for the rock specimen. This app also allows the measurement of Ultrasonic P-Wave Velocities when paired with a ULT-2 or ULT-200.