E3 Controller vs WIDI App

E3 Controller is an application designed to enable remote control of a Disklavier E3 or DKC-850. All functions that were possible with the infrared remote control (that was included with the Disklavier E3 or DKC-850) have been made available on iOS devices (iPhone/iPod touch/iPad). Moreover, the E3 Controller displays the screen of the control unit of Disklavier, so you don't have to physically go to the piano to confirm, for example, a song title. All that's required is your ability to access the wireless router that is connected to your Disklavier. Requirements: - Disklavier E3 Version 3.20 or later, or DKC-850 Version 3.20 or later - Wireless router Usage note: * Connect Disklavier to the wireless router by LAN cable and choose that same network in the Wi-Fi setting of iPhone/iPod touch/iPad. * If the wireless router has several local networks, confirm that the Disklavier and the iOS device are connected to the same LAN. For more detail, refer to the manual that came with your wireless router. User's Guide: You can access the E3 Controller User's Guide by tapping the "triangle" button in the lower-right corner of the display.

The WIDI app is a dedicated application for configuring and setting all WIDI wireless Bluetooth MIDI devices (including WIDI Master, WIDI Jack, WIDI Uhost, WIDI Bud Pro, WIDI Core/CoreX, WIDI Thru6 BT, WIDI K.O.II and authorized products such as Kurzweil Air MIDI, Nektar WIDIFLEX, Xvive MD1, Limex BT etc.). You can use this application for the following operations: * Update to the latest device firmware * Rename device * Set the transmit power of Bluetooth * Set the Bluetooth role to peripheral or auto mode * Set the performance mode for low latency or low jitter * Set the wired MIDI thru function * Set the group auto-learn * Activate the WIDI Master in test mode (red light condition, firmware version v0046 only) * Clear the existing group connection setting * Factory reset * Set up group connection * Link to online trouble shooting contents Note1: The group connection function requires firmware version v0136 or higher. Note2: The group auto-learn function requires firmware version v0166.