Electrical Calc Elite vs ElectriCalc Pro

Electrical Calc Elite™ is the electrician's code calculator that follows the NEC® edition your inspector enforces. Size wire, check voltage drop, fill conduit and size motor circuits — offline, in seconds. Answers that come from a code table print which one. One purchase, no subscription. Ten editions of the National Electrical Code® are built in — NEC® 2026*, 2023, 2020, 2017, 2014, 2011, 2008, 2005, 2002 and 1999 — and every table, correction factor and code reference follows the one you select. BUILT FOR Electricians, contractors, estimators, engineers, maintenance techs, inspectors, apprentices studying for the exam, and homeowners checking their work. WIRE SIZE AND AMPACITY • Required wire size in AWG or kcmil from amps: copper or aluminum, single-phase or three-phase, 60/75/90°C insulation, at 100% or 125% • Ampacity in raceway or free air, from the NEC® ampacity tables (310.16 and 310.17, or the earlier equivalents) • Ambient temperature correction above or below 30°C, in °C or °F • Adjustment for more than three current-carrying conductors in a raceway • Parallel and derated conductor sizing • Circular mils and kcmil for any wire size VOLTAGE DROP • Volts and percent dropped from one-way length, amps, phase and wire size, with Chapter 9 Table 8 resistance corrected to 60, 75 or 90°C • Wire size for a long run, flagged VD WIRE SIZE when the drop, not the ampacity table, set it • Longest one-way run a wire size will carry inside your limit: 3% by default, or any limit you set • 1- or 3-phase, copper or aluminum, feet or meters; wire resistance per 1000 ft on its own key CONDUIT SIZING AND FILL • 12 conduit types: EMT, ENT, FMC, IMC, LFNA, LFNB, LFMC, RMC, PVC schedule 40 and 80, Type A and Type EB • Trade size for a mix of THW/THHW, XHH/XHHW or THHN/THWN conductors • Fill percentage, cross-sectional area and area remaining, from the Chapter 9 tables, with the correct 1-, 2- and over-2-wire fill limits • Maximum conductors of a given size a conduit will take MOTORS • Full-load current for 1-phase, 3-phase, synchronous and DC motors, from NEC® Tables 430.247, 430.248 and 430.250 • Horsepower from amps, and full-load amps from horsepower • Maximum fuse and breaker size from Table 430.52 (430.52(C)(1) in 2023 and 2026) — single-element or dual-element fuse, inverse-time or instantaneous-trip breaker, across seven motor types • Motor overload protection per 430.32(A)(1) • NEMA starter size, per NEMA ICS 2 GROUNDING • Equipment grounding conductor size, per 250.122 • Grounding electrode conductor size, per 250.66 POWER, MATH AND CONVERSIONS • Convert between amps, watts, volts, VA, kVA, kW, power factor %, efficiency % and DC resistance • Ohm's Law: enter any two of ohms, volts or amps to get the third • Kirchhoff's Law • Parallel resistance • BTU ↔ kilowatt-hours • Doubles as a standard calculator, with Store and Recall memory keys CODE REFERENCES YOU CAN CHECK Wire size, fuse, breaker, overload and grounding answers print the table or section they came from, numbered as your selected edition numbers it. Fuse and breaker cards show the percentage of full-load current used and the current it was applied to. HELP BUILT IN Hold any function key to open the manual at that key's own section. A Help key opens it from the front, with worked keystroke examples. A Getting Started guide and the full manual are included. WORKS OFFLINE Every calculation runs on the device. No account, no sign-in, no ads, and no waiting on a signal in a basement or a mechanical room. SUPPORT Free technical support techsupport@cyberprodigy.com — https://www.cyberprodigy.com/contact.html Manual: https://www.cyberprodigy.com/electricalcalcelite/ *NEC® 2026 code data is a one-time in-app purchase. The other nine editions are included. Electrical Calc Elite™ is not associated with ElectriCalc® Pro and Cyberprodigy LLC is not affiliated with Calculated Industries, Inc.

FREE Try Before You Buy trial, your App Store account is not charged by Apple during the free trial. Electrical Contractors, Designers, Electricians, and Lighting Specialists solve tough electrical calculations in seconds and deliver those solutions in conformance with the latest NEC®. The ElectriCalc Pro electrical code calculator is compliant with 2023, 2020, 2017, 2014, 2011, 2008, 2005, 2002, 1999, and 1996 NEC®. The official US-based National Electrical Code® (NEC) ElectriCalc Pro from Calculated Industries for iOS is a full-featured emulation of our popular #5065/#5070 models. ----- Full Functionality of our Pro Handheld Calculator ----- • Experience the power of a professional calculator on your iPhone. • ElectriCalc Pro replicates all features & solutions of our top-rated handheld model. ----- Built-in Help & Tutorials ----- • Press and hold any key for clear definitions, examples, and usage guides. • A complete user manual is also available. ----- Complete Electrical Reference Tool ----- • Save time, trouble, and money with ElectriCalc Pro's comprehensive electrical reference data. • All the info you need for calculations and code compliance is built into one app. The ElectriCalc Pro is a complete electrical reference tool that will save time, trouble, and money. ElectriCalc Pro Solutions: • Wire Sizes • Voltage Drop • Conduit Sizing • Motor Full-Load Amps • Fuse and Breaker Sizes • Service and Equipment Grounding Conductor Sizes • Parallel Resistance • Ohm’s Law Calculations – enter any two values to solve for the third • Circular MILS wire sizes ElectriCalc Pro Calculations: • Work directly in and convert between Amps, Watts, Volts, Volt-Amps, kVA, kW, PF% and EFF%, and DC Resistance • Calculate wire sizes per NEC® 310-16 and 310-17; Copper or aluminum, 3Ø/1Ø, 60°C, 75°C, 90°C insulation ratings and 100% or 125% of ampacity. Can also adjust wire sizes for ambient temperatures other than 30◦ C and more than three wires in a raceway • Integrated voltage drop solutions. Find minimum VD wire size, maximum length for any given wire size, drop percentage, actual number and percentage of Volts dropped • Conduit sizing for 12 types of conduit. Plus, it gives fill percentages, cross-sectional areas, remaining areas, and more • Find Motor Full-Load Amps per current NEC®. Works in 1Ø and 3Ø with the newly expanded tables for 3Ø induction (to 500 hp), synchronous (to 200 hp), and DC motors per NEC® 430-247, 430- 248 and 430-250 • Calculates Fuse and Breaker Sizes per NEC® 430-52 • Parallel and derated wire sizing • Parallel Resistance • NEC Table number displays when performing Wire Size calculations • Sizes overload protection per NEC® 430-32 • Automatically finds NEMA starter sizes • Calculates service and equipment grounding conductor sizes per NEC®: 250-122 and 250-66. • Enter BTU to find Kilowatts per Hour • Enter Kilowatts per Hour to find BTU • Ohm’s Law Calculations – enter any two values to solve for the third • Enter, solve, or convert to Circular MILS wire sizes Note: Electrical math is universal. However, code-based sizing solutions are based on the US National Electrical Code® (NEC); users in other countries should check with their local Code Officials for applicability. SUBSCRIPTION INFORMATION The first seven days are free. Subscriptions offered will automatically renew at the end of the chosen period. Upon purchase confirmation and completion of a free trial, payment will be charged to your Apple account. The subscription will automatically renew unless auto-renew is turned off or the subscription is canceled in settings at least one day (24 hours) before the subscription period ends. You can manage your subscription and turn off auto-renewal in your Apple account Settings > Account (Apple ID) > Subscriptions. TRADEMARKS ElectriCalc(TM) and Calculated Industries® are trademarks and registered trademarks of Calculated Industries, Inc. Copyright 2024