HamAntCal vs xCluster
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
HamAntCal
This app helps amateur radio operators calculate the starting lengths for various antenna types. It supports both imperial and metric units and offers adjustable calculations for inverted vee antennas based on wire angle. Results require final trimming for precise tuning.
- Calculate antenna starting lengths
- Supports feet/inches and metric units
- Calculates for Dipoles, Inverted Vee, and Verticals
- Adjustable Inverted Vee angle calculation
- Frequency range 30 KHz to 500 MHz (Inverted Vee up to 60 MHz)
- Updated interface and settings
Read full descriptionHide full description
HamAntCal Version 3.5 (Ham Antenna Calculator) will simply and intuitively calculate for you the starting length needed for constructing your antennas in feet/inches or in metric. It will calculate the starting length for "Dipole's", "Inverted Vee's", "Vertical's" and has a page for calculating 1/8, 1/4, 1/2, 5/8 and "Full Wave" length. In this update: ▪HamAntCal has been updated to 64 bit and iPhone X ▪New updated interface and settings menu ▪New in app purchase to update features ▪This update requires iOS 8.2 and above. --------------------------------------- ▪ HamAntCal works in feet/inches as well as metric. ▪ The easy to use and intuitive interface makes it easy to calculate starting lengths for building your antennas. It will calculate the starting length for "Dipoles", "Verticals" and "Inverted Vee" antennas. There is also a page for calculating 1/8, 1/4, 1/2, 5/8 and "Full Wave" length. ▪ I have come across a lot of different and conflicting information for calculating the length of an "Inverted Vee" antenna. Some say subtract 2 to 5 percent based on the angle of the wires. Others say to add a percentage based on the angle of the wires down from horizontal. I decided to test this before releasing this app. First I calculated for a "Dipole" using the "Dipole" calculator. Then I put together a "Dipole" with a support for the center insulator as well as the ends. I measured the resonant frequency with an antenna analyzer. Then I brought the ends down towards 45 degrees from horizontal. As the ends were lowered the resonant frequency increased. This means that the length of the "Inverted Vee" would need to be increased to stay resonant at the same frequency as the dipole. The "Inverted Vee" calculator has a slider that starts up with an angle of 45 degrees and can be adjusted down to 20 degrees continuously re-calculating as it is moved. This corresponds to about 4.5 to 2 percent added to the length of the "Inverted Vee". ▪ No antenna calculator can give exact results in every case. Much will depend on the wire used, the height above ground, the ground itself, nearby objects, etc…. It's always a good practice to add a little extra wire and then trim up to the desired frequency. ▪ This calculator will calculate from 30 Khz to 500Mhz for the "Dipole", "Vertical" and "Length" calculators. The maximum for the "Inverted Vee" calculator is 60MHz. ▪ This calculator does not give exact measurements and the results will need to be trimmed using an antenna analyzer or SWR meter to the exact frequency after installation. Leave some extra wire on each section for trimming and wrapping around the insulators. ▪ Keep in mind that there are a lot of factors that can affect the resonant frequency of an antenna. At VHF and above even a small change in the length or diameter of an element can make a large change in the resonant frequency of an antenna even more so than at lower frequencies. This calculator just provides the starting length for building an antenna and proper matching methods will need to be used. ▪ Please be safe while building your antennas. Always use the proper safety equipment. Never build your antenna where it can come in contact with power lines, this includes the supports as well as the antenna itself and feed lines. BE SAFE! ▪ Although I have had good results using this calculator the results are not guaranteed. Always add some extra length and trim the antenna to frequency (it's much easier to trim than it is to add wire to the antenna). Please feel free to contact me with suggestions, problems, compliments, ideas for improvements or additions to HamAntCal. Your ratings are appreciated.
xCluster
Visualize DX cluster activity on a world map and in a list. Filter spots by call sign or band, and set custom alerts for specific stations or countries. Integrates with popular DX services and supports call parsing for location data.
- Display DX spots on map and list
- Filter by band and call sign
- Set custom alerts
- Predefined cluster servers
- Built-in call parser
- Zoom and pan map
Read full descriptionHide full description
xCluster is a visual display of dx cluster activity built for the iPad. DX spots are received via telnet or web services and displayed in a tabular form and plotted on a map of the world. You can filter the spots by call sign or band. Spots are created using the latitude and longitude of the dx station and spotter. The program has an internal call parsing component to determine the country for each call but can use QRZ.com for more accurate location data. Lookup priority is QRZ.com with the the call parser as a backup. DX spots can be displayed on a map or in a tabular form. Alerts for specific stations, bands or countries may be set and will be highlighted in the list and on the map. A number of major telnet clusters are built in along with DXSummit and PSK Reporter. PSK Reporter will display other stations that can hear your signal. You must be running WSJT-X or FLDIGI and have it configured correctly to work. You may contact the author with questions, suggestions or issues at support@w6op.com Features: Display dx spots on a map and in a list Predefined cluster servers and websites Filter by band and call sign Set alerts for display in the list and on the map Alerts can be set by country, band and call sign Save alerts in iCloud Built in call parser if QRZ.com is unavailable Freeform cluster command input Zoom and pan the map display
Screenshots
Verdict
The clearest difference is price: xCluster at Free against HamAntCal's $0.99. xCluster also leads on in-app purchases (none vs 1) and update cadence (monthly vs every 31 months). HamAntCal's advantage is rating (4.6 vs 4.0) and ratings volume (57 vs 5). On ads and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
xCluster is free to download; HamAntCal costs $0.99 up front. HamAntCal sells 1 one-off in-app purchase. xCluster asks for nothing beyond the download.
HamAntCal holds the better App Store score, 4.6 against 4.0. That said, the two scores are not equally well evidenced: HamAntCal has 57 ratings behind it against 5, so its average is the more settled of the two. Written reviews complicate that: 90% of HamAntCal's written reviews are positive against 100% of xCluster's, so the app with the better star average is not the one people write more warmly about.
HamAntCal ships an update every 31 months, xCluster monthly. The most recent releases landed on November 13, 2026 and November 17, 2026 respectively.
| Parameter | HamAntCal | xCluster |
|---|---|---|
| Price | $0.99 | Free — better |
| Rating | 4.6 (57 ratings) — better | 4.0 (5 ratings) |
| Positive reviews | 90.0% of reviews | 100.0% of reviews — better |
| Number of ratings | 57 — better | 5 |
| Update frequency | Every 31 months | Monthly — better |
| Ads | No | No |
| In-app purchases | Yes | No — better |
| Monetization | Free with in-app purchases | Free — better |
| Devices | iPhone, iPod | iPhone, iPad |
| Requires iOS | 13.0 — better | 26.0 |
| Further details — not scored | ||
| Size | 2 MB | 12 MB |
| Age rating | 4+ | 4+ |
| Developer | State Road 41 Apps LLC | Peter Bourget |
Customer experience
HamAntCal
xCluster
Bugs and requests
HamAntCal
Reported bugs
4 issues- No longer works with IOS 11 (historical)
- App is wrong on inverted V
- Inverted V issue: leg length calculation seems incorrect
- Calculation for inverted V seems incorrect
Requested features
10 requests- Add support for UHF frequencies and higher
- Add velocity factor and radiating element size as variables
- Add suggestion: input target and measured frequency to show trim/add amount
- Add Inverted Vee mode to calculate height to top and end-to-end distance
- Add trap calculations for common bands
Show 5 moreShow fewer
- Add full wave loop calculation
- Improve UI: one page for frequency entry, browse antenna options with more room for info
- Add 5/8 wave vertical calculation
- Show how to build a yagi antenna
- Add metric units
xCluster
Not enough reviews yet to summarise bugs or requests.
In-app purchases
HamAntCal
- Features upgrade$0.99
xCluster
No in-app purchases








