Comparison

Energy Cycles vs Chint Connect

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Energy Cycles

This app provides a tool for energy efficiency studies, covering four major energy conversion cycles. It graphically presents generic models of steady-state energy devices, allowing engineers and auditors to assess cycle performances and efficiencies. Users can tailor, save, and monitor changes for continuous reference.

Highlights
  • Four major energy conversion cycles
  • Graphical presentation of energy devices
  • Component editing for state property computation
  • Save and reload cycle data
  • SI or USCS unit selection
  • Cycle performance and efficiency results
Features
Read full description

Energy Cycle App covers four major energy conversion cycles to facilitate as a tool for performing energy efficiency studies. The graphical presentation of different models shown in a generic form composed of components that are steady state energy devices where in its state properties remain constant at the inlet and outlet regardless of time for analysis purpose. This can be very helpful to different energy engineers and auditors in assessing the cycle performances with respect to sizing and conversion efficiencies. There are four separate built-in apps in one. Two under utility power generation category and two under HVAC category as shown in the following screen shots. Each can be tailored to suit individual application and can be saved in a file for continuous reference and to monitor the changes and improvement. Energy Cycles: I Rankine Cycle a. Boiler (conventional fossil fuel) b. Turbine (single, two and three stage) c. Condenser d. Feed Pump II Combined Heat and Power (CHP Brayton) Cycle a. Air compressor b. Fuel Injection c. Gas Turbine d. Steam Generator III HVAC Cooling Cycle a. Conditioned space b. Outdoor Air c. Fan-coil process d. Return and Exhaust air flows IV HVAC Heating Cycle a. Conditioned space b. Outdoor Air c. Fan-coil process d. Return and Exhaust air flows Each cycle component responds to individual touch for editing. Upon editing, state properties are computed and presented in a table form and displayed in the scroll view of the respective home screen. The following screen shot on Rankine cycle has a 3 stage turbine and hence got 8 states. Inter-stages of the turbine with temperature and pressure data are also shown in the screen shot that is in response to the tapping of turbine icon in the model. Accordingly, the thermodynamic state properties of steam are calculated and presented in the property table of the Rankine cycle. For HVAC, a separate section has been added as a part of conditioned space for editing cooling and heating load under 10 major categories as shown in the screen shot. A separate computation button is provided for the users to select and compute load under each category by editing default parameters as per recommended practice. A comprehensive foot note is also provided under each category for proper editing and load computation. Cycle performance and efficiency results are indicated in red just to distinguish it from the data and updated as and when component editing is done. In addition, for Rankine and CHP a comprehensive cycle heat balance is also provided. All Cycle data can be saved with unique title and can be reloaded as and when required for editing and review. Only few screen shots covers mainly Rankine, CHP and HVAC cooling cycle. For additional screen shots and examples on above energy cycles please refer to our web site at www.flowjoule.com Users can choose either SI or USCS to enter all input data. App notes are provided for each model for clarity on type of input and output with computation logic. One can easily access it from home screen. This application will be constantly updated and all future updates are available at no extra cost.

About

Chint Connect

This app allows users to connect and configure solar inverters via Wi-Fi or Bluetooth. It enables real-time monitoring of power generation data, remote firmware upgrades, and troubleshooting for solar power station equipment.

Highlights
  • Connect inverters via Wi-Fi or Bluetooth
  • Configure inverter parameters
  • Upload power generation data
  • Monitor power generation status
  • Initialize new site systems
  • Remote firmware upgrades
Features
Read full description

The Chint Connect App Connect the inverter through wifi or Bluetooth, configure the inverter parameters through the App, upload the power generation data and power generation status information of the inverter to the server, and apply the Internet of Things to the ordinary solar power station equipment. The Chint Connect App is a versatile tool for configuring inverters and troubleshooting with LinKit hardware. With Chint Connect, users can complete the installation, configuration and troubleshooting of Flex Gateway and inverters. Field installations that used laptops, oscilloscopes or other ancillary tools have now been replaced by smartphones. Function: 1. Configure the Flex Gateway, Bluetooth Gateway, and Inverter and check if it has been successfully configured. 2. Initialize the new site system, the site owner can monitor all relevant electrical data in real time, control the device and remotely upgrade the inverter firmware. 3. Upgrade the firmware of Flex Gateway, Inverters and LinKit in the field.

Screenshots

Energy Cycles4 screens
Chint Connect4 screens

Verdict

The call

The clearest difference is price: Chint Connect at Free against Energy Cycles's $6.99. Chint Connect also leads on update cadence (every 3 weeks vs every 10 months). On review sentiment, ads, in-app purchases and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ad data · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ad data · Monetization

Chint Connect is free to download; Energy Cycles costs $6.99 up front. Neither carries in-app purchases, so what you see is what you pay.

UpkeepUpdate frequency

Energy Cycles ships an update every 10 months, Chint Connect every 3 weeks. The most recent releases landed on November 1, 2026 and November 17, 2026 respectively.

Scorecard3 real differences · 7 level
Energy Cycles versus Chint Connect: the parameters behind the verdict, then further details
ParameterEnergy CyclesChint Connect
Price$6.99Free — better
Rating—1.6 (5 ratings) — better
Positive reviews0.0% of reviews6.7% of reviews — better
Number of ratings—5 — better
Update frequencyEvery 10 monthsEvery 3 weeks — better
Ad dataNoNo
In-app purchasesNoNo
MonetizationPaidFree — better
DevicesiPhone, iPodiPhone, iPad, iPod — better
Requires iOS14.313.0 — better
Further details — not scored
Size2 MB233 MB
Age rating4+4+
DeveloperKaup Shenoy AssociatesShanghai Chint Power Systems Co., Ltd.

Customer experience

Energy Cycles

Written reviews1 reviews
Positive0.0%
Neutral0.0%
Negative100.0%

Chint Connect

All ratings5 ratings
Positive20.0%
Neutral0.0%
Negative80.0%
Written reviews15 reviews
Positive6.7%
Neutral13.3%
Negative80.0%

In-app purchases

None

Energy Cycles

No in-app purchases

None

Chint Connect

No in-app purchases

Questions

Is Energy Cycles free?
Energy Cycles costs $6.99, with no in-app purchases.
Is Chint Connect free?
Chint Connect is free to download, with no in-app purchases.
Do Energy Cycles or Chint Connect have ads?
Neither Energy Cycles nor Chint Connect lists data used for advertising in its App Store privacy details.
Which is updated more often, Energy Cycles or Chint Connect?
Energy Cycles ships an update every 10 months, and Chint Connect every 3 weeks. Most recently, Energy Cycles was updated on November 1, 2026 and Chint Connect on November 17, 2026.

Other comparisons