Steelmate TPMS vs OBDocker

铁将军（TPMS）胎压监测报警器 – 适用于iPhone /iPad的应用 用iPhone智能手机，坐在车内配合接收器能轻松检测四个轮胎的气压和温度！ 铁将军 TPMS-8886/85 胎压监测报警器，是确保汽车安全行驶的创新产品，实现了产品硬件简单的自助安装。在汽车行驶中，系统传感器自动监测轮胎气压与温度，当轮胎出现气压过低或过高、温度过高、漏气等异常情况时，接收器即时报警，使驾驶者及时减速停车检查轮胎，并通过iPhone智能手机的应用软件查看四个轮胎的信息；日常行驶，也可以通过iPhone智能手机界面随时查看轮胎气压、温度，使车辆保持正确的轮胎压力，确保安全驾驶。 产品的特点 1. 快捷安装，不接线的无线 TPMS 接收器采用点烟口取电，无需接线，即插即用。TPMS-8886的外置传感器采用气嘴盖式设计，产品可以在2分钟内自助安装。TPMS-85采用内置传感器设计，安装需到专业轮胎店进行。 2.行车后系统自动工作，随时监测轮胎的压力与温度，从软件界面可以查看具体的数值。 3.当轮胎出现漏气、压力过低或者过高、轮胎温度过高等异常情况时，接收器即刻报警，同时软件界面也进入报警状态。 4. TPMS-8886采用超小型的传感器，通过紧固螺母等设计，确保传感器牢固不脱落，性能稳定。TPMS-85采用稳定的内置传感器设计，替换原车气嘴，安装后可正常充气，不影响传感器工作。 5.通过iPhone应用程序，可实现系统中、英文语言的设置；三种气压单位（Bar、Psi、Kgf/cm2）的设置，以及两种温度单位（℃,℉）的设置。 DIY TPMS for iPhone (TPMS-8886) & TPMS for iPhone (TPMS-85) from Steelmate®, are an innovative aftermarket Tire Pressure Monitoring System (TPMS) to work with iOS App in a vehicle for real-time monitoring individual tire pressure and temperature once Bluetooth from iPhone/ iPad/ iPod Touch (device) connected as monitor to ensure on-road safety. Main components in the package are a cigarette plug transceiver and four valve-cap external sensors (TPMS-8886)/ professional internal sensors (TPMS-85). First, install the sensors. Second, plug the transceiver into a cigarette lighter and pair with the device by Bluetooth. Then, the transceiver works automatically whenever the vehicle is ignition on and the paired device inside the vehicle. The function of this system is to provide high/low tire pressure warning, fast/slow leaking warning, high tire temperature warning, low battery sensor warning and sensor failure warning. The driver can view any individual tire data from the device any time to ensure the both tire pressure and temperatures are within the safety range. Once abnormal tire data received, the transceiver will have both audio (beep sounds) & visual (the light changed from green to red) alerts and the App will show the corresponding tire data. Features 1.Wireless transmission 2. Real-time monitoring and display. 3. Audio and visual warning 4. TPMS-8886 comes with the lightest valve-cap sensor, no balance needed after installaion 5. Converitable language, pressure unit (Bar、Psi、Kgf/cm2) and temperature unit（℃,℉.）

Crafted with user-friendliness and power in mind, OBDocker is a professional OBD2 car scanner app that empowers you to diagnose, service, and customize your vehicles with ease and precision. ************************* KEY FEATURES → Triple-Mode Diagnostics ○ Full-Systems Diagnose: One-Click OE-Level full-systems diagnostics. ○ Multi-Systems Diagnose: Scan multiple systems through ECUs filtering such as TMS, SRS, ABS, TCM, BCM and many more. ○ Quick Scan: Swiftly read and clear engine fault codes to maintain a smooth drive. → Triple-Mode Live Data ○ Health Monitor: Track every systems performance by diving into real-time parameters. ○ Engine Monitor: Monitor your engine's performance. ○ Dash Monitor: Visualize your vehicle's metrics in real-time. → Full-Cycle Service ○ Emissions Pre-Check: Test your emissions and pass with confidence before your official check. ○ Control Tests: Perform EVAP Leak Test, DPF and Inducement System Reinitialization. ○ Oil Reset: Easily reset oil change reminders and maintenance lights to keep your car's records up to date. ○ Battery Registration: Register the battery replacement to notify the battery management. → On-Click Modification ○ Adjustments: Adjust different car settings and customize them by one-click. ○ Retrofits: Easily adapt additional vehicle parts after installation. ************************* OBD ADAPTERS OBDocker requires a compatible OBD adapter to work. We recommend the following for the best experience: - High Performance: Vlinker Series, OBDLink Series, MotorSure OBD Tool, Carista EVO. - Middle Performance: All genuine adapters compatible with ELM327 / ELM329, including Veepeak Series, Vgate iCar Series, UniCarScan, NEXAS, Carista, Rodoil ScanX, and more. - Low Performance (Not Recommended): Cheep Chinese clones ELM. ************************* SUPPORTED CARS OBDocker is compatible with a wide range of vehicles, covering both standard and advanced modes: - Standard Mode: Universal compatibility with OBD2 / OBD-II or EOBD vehicles worldwide. - Advanced Mode: Toyota, Lexus, Nissan, infiniti, Honda, Acura, Hyundai, Kia, Volkswagen, Audi, Skoda, SEAT, Mercedes-Benz, BMW, Mini, Porsche, Ford, Lincoln, Chevrolet, Cadillac, GMC, Buick. And still working really hard to add more… ************************* PLANS: OBDocker offers a free trial for full feature access. To unlock unlimited potential, choose from our Pro or Pro Max subscriptions. NOTE: Vehicle ECUs vary in the amount of sensors supported. This app can’t show you something, that is not provided by your car. Terms and Conditions: https://www.obdocker.com/terms-and-coditions Privacy Policy: https://www.obdocker.com/privacy-policy Apple Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/