KeyLight PRO vs Flash Photography Adviser

Shooting off-camera flash photography is challenging. Optimal exposure settings requires a knowledge of how to balance ISO sensitivity, aperture level, strobe power and strobe proximity to the subject. Because strobe power varies dramatically not only between manufacturers and models but also when external elements such as umbrellas, soft-boxes and lighting gels are used, quickly determining correct exposure settings can be challenging at best, and frustrating at the worst. KeyLight PRO removes all of this guesswork. Easy-to-use calculators quickly and clearly display optimal ISO levels, aperture settings, strobe power levels and strobe-to-subject distances in an intuitive, familiar interface. For the more advanced photographer, the Key Falloff calculator will calculate the proximity of the strobe from the subject in order to meet a desired exposure value falloff over a specific distance. For example, the area behind a subject is 10 feet away, should be 3 stops underexposed relative to the subject, and the strobe is firing at 1/4 power and the camera is at ISO 400. What should the aperture setting be on the camera? With KeyLight PRO, the answer is a tap away. How many strobes does KeyLight PRO support? The Virtual Gear Bag provides an unlimited number of strobe makes, models and settings, and the Strobe Library provides over 100 pre-loaded strobe model configurations. The Gear Bag is readily accessible on all of the calculators, providing quick, easy and accurate exposure settings when swapping between your strobes. Only using one strobe? Keep multiple "set ups" in your Gear Bag under a variety of configurations: bare bulbed, gelled, soft-boxed, umbrellaed, neutral-density filtered, wall-bounced, go-bo'd. There is no limit to the number of ways the light from a single strobe can be modified. Create as many configurations for these light modifiers as you need, and know in an instant how to most effectively utilize them. KeyLight PRO. Control the light.

The Flash Photography Adviser app automatically proposes balanced settings, and subsequently supports changing these settings to achieve a new equilibrium, for: - Flash Coverage (Zoom), - Flash Output (Power Level), - Flashgun-to-Subject Distance, - Camera ISO, - Camera Aperture, assuming a shutter speed that is at or below the camera's maximum flash sync speed, and where the flashgun-to-subject distance is measured along the path that the light travels from flash to subject. Each such an equilibrium represents a correct exposure in accordance with the guide number rule. The guide number rule is a handy rule of thumb in flash photography; the rule estimates the required flash exposure value without using a light meter. This rule evolves around three concepts: - Incident light (as opposed to reflected light); an advantage for `difficult' subjects (for example bright or dark scenes). - The different lighting conditions that occur when (a) zooming your flashgun, (b) changing the flash-to-subject distance, or (c) changing the flash power - The relatively fixed exposure value for the light from the flashgun under these conditions What the rule does NOT prescribe are the actual flashgun and related camera settings (aperture, ISO, flash power, flash zoom, flash-to-subject distance) that you can use, as long as the combination of manual flashgun and camera settings lead to an equivalent exposure value as specified by the rule. Often, there are many of such equilibria. The Flash Adviser will assist in finding these equilibria by indicating how to achieve balance (the deviation as well as the direction), and indicating when balance is achieved. For this, the app indicates the resulting overall exposure value in stops RELATIVE to the rule for a selected lighting condition. Also, in the balancing process, you can choose to balance to a flash exposure compensation value rather than balancing to the zero value. For instance, you can use this feature for compensating for specific light modifiers (e.g., a shoot-through umbrella, a softbox) or to achieve balance between flash light ambient light. In this convenient app you can define and store your own flashgun(s). The app estimates the required exposure value based on the (zoom-value dependent) guide numbers of the flashgun. These guide number values can often be found in the specifications section in the User Guide of your flashgun, and can be stored in the app when defining your flashgun. The app can also be used as a `training device', where you first guess the required combination of settings for balance, and subsequently check these with the app. Further characteristics: - No in-app purchases - No account, no login - No advertisements