Precision Transit Level mini vs 4Pro Level Tools

LiDAR, along with mixed reality technology lets you place two measuring sticks right in the scene from the camera. It accurately reads both the horizontal and vertical differences between the two points generating for you the run, the rise, the slope, and the deflection of the mid point. Easily dig ditches and install drains with precise slope. With a range to target up to 18 feet(6 meters), you can shoot grade right from your seat on the back-hoe(or whatever). A max range of 100 meters thanks to the device constantly updating its position with the Augmented Reality interface. - Super fast start up each time, picks up where you left off. - Single screen with Heads Up Display(HUD) for realtime operation. - Auto Zoom toggles anytime. - Six step navigation lets you advance one step at time forward with the "GO" button and the same for the "BACK" button. GET STARTED Step 1 - Set origin: Aim the red pointer for the target and tap "GO". Remember you are placing a measuring stick here, not a micrometer. If you are not satisfied, tap "BACK". It is real easy to do over. Step 1 - Neutral: The measuring stick is now fixed but will still rotate to face you. This is a good time to adjust the "WATER" level ,if needed, with the stepper in the upper left-hand corner of the view. Notice how the water "puddles" so you can see low spots that might not be noticed. When you go up with the water level it advances one inch at a time. Notice how it "fills" the scene and wraps around irregular shapes with ease for easy marking. You can either watch your own hand in the scene, or you can guide an assistant to the right position. Step 2 - Set length: Two more measuring sticks are now active. Stretch it to right place and tap "GO". You have a dashboard gauge in the upper right-hand corner for the "Ruler". This is the actual distance between the two points. In the bottom left-hand corner there is "LENGTH" which is the horizontal distance between the two points. Below it is the "SLOPE" which gives the angle in degrees between the two points. 0.6 degrees is 1/8 inch per foot. 1.2 degrees is 1/4 inch per foot. The bottom most gauge on the right is the "LEVEL". This is the vertical distance between the two points. Step 2 - Neutral: Everything is frozen for closer inspection and evaluation. Step 3 - Set Width: The width can be stretched in either direction off the baseline. The "SLOPE" gauge transforms to "WIDTH". Step 3 - Neutral: Adjust the "HEIGHT" , if needed, with stepper in the upper right-hand corner. It increments one inch at a time. The box stays on top of the water. The two gauges in the bottom right corner are for "AREA"(represented in square feet or square meters), and the "VOLUME" one uses cubic yards, or cubic meters. A LiDAR-equipped device is recommended.

4Pro Level Tools — Every Way to Check Level, in One App Stop carrying a physical spirit level. 4Pro Level Tools turns your phone into a precision leveling instrument with four dedicated modes, each built for a different job. BUBBLE MODE The classic torpedo-level look. A dual-tube gauge reads both tilt axes at once, with a real-time percentage readout so you know exactly how far off level you are — not just which way to nudge. CIRCULAR MODE A bullseye-style dial for surfaces that need to sit flat in every direction — tabletops, tripods, camera rigs, appliances. Center the bubble, and you're level on both axes simultaneously. PLUMB MODE Check any wall, door frame, or vertical surface the way a real plumb bob does — hang it, watch it settle, read the deviation. No string or weight required. PILLAR MODE Purpose-built for checking columns and posts for true vertical lean, with a live readout of degrees and percentage off-plumb. WHY 4PRO LEVEL TOOLS • Four precision modes in one app — pick the right tool for the job instead of switching apps • Clean, high-contrast gauges that are easy to read at a glance, indoors or out • Live percentage and angle readouts, not just a vague bubble position • Light and dark themes • Works entirely offline — no GPS, no camera, no account required Whether you're hanging a shelf, installing a fence post, mounting a TV, or checking a column during a build, 4Pro Level Tools has the right gauge ready.