数控车床编程 vs iNC

数控车床编程适合数控符合车工、铣工、加工、机械加工,数控车床、普通车床、车铣中心使用车铣符合机床和车铣机的车工和铣工和从业人员使用。 车铣机床铣刨车加工中零件工况，计算、编程、微智造、数控计算、机械加工和测量。 铣工车削、铣削、钻孔等主要计算方式，主要模块包含： 加工计算器、车削计算器、铣削计算器、钻孔计算器、车削计算公式、铣削加工计算方式、钻孔计算公式 主要功能： 1. 圆弧切点计算：包含多种常见零件结构,可快速计算出切点坐标并实时生成程序, 角度接圆弧、圆弧接角度、角度接角度、圆弧接圆弧，同时提供刀尖补偿功能。 2. 螺纹计算：常见螺纹的查询和计算，包含公制螺纹、美制螺纹、英制螺纹、T型螺纹、蜗杆螺纹、爱克母螺纹、齿轮，实时生成加工程序。螺纹粗牙和细牙的对照表。 3. 宏程序：提供椭圆、抛物线、网纹、八字油槽、蜗杆、钻孔、外圆槽、端面槽、大螺纹螺纹、椭圆内外槽粗车、网纹、螺纹、蜗杆、矩形螺纹、锯齿螺纹、波形螺纹等一系列工件的加工宏程序的自动生成。 4. 锥度计算：计算锥度，可输入起刀和退刀距离，并进行刀尖补偿。 5. 三角函数：三角函数计算 和比例计算、 6. 对角计算：四边形，六边形，多边形，四方，六方的对角计算和圆的尺寸计算 7. 重量计算：常见形状材料的重量计算 8. 公差计算：孔轴配合公差的快速查询 9. 其他计算：倒角计算、线速度转换、粗糙度计算、横限速计算、光洁度计算。 数控机床普通机床车削加工数控编程、数控模拟、数控仿真系统，包含读零件图、工艺制定、工装准备、工艺实施4个功能模块；涉及台阶轴、连接套、丝杆、偏心轴4个普通零件的加工。 用户协议: https://kdocs.cn/l/cobRrG8hYgv4 隐私政策: https://kdocs.cn/l/ctlHI6yINoJJ

iNC-Mill brings NC/G-code editing, 3D toolpath review, and cutting simulation to iPhone and iPad. Preview material removal for 3-axis milling and turning, inspect FANUC macros, and work with machining files locally. Cutting simulation requires an active subscription. CLOSER, CLEARER 3D TOOLPATH REVIEW • Pick two points on a toolpath to inspect 3D distance, coordinate differences, and path length, with endpoint snapping • Select a precise path position to seek playback, or navigate by move, Z change, cutting section, or tool section • Switch to a tool view and independently lock the viewing direction • Adjust X/Y/Z display scales independently to reveal small variations • Play toolpaths forward or in reverse, with speed controlled independently of play/pause • See the associated code line when available, alongside feed F and spindle S values • Customize path colors, inspect motion counts and travel-distance shares in the legend, and filter paths by playback range Measurements describe toolpath geometry. Curves use the published path segments; these are not measurements of the physical workpiece. BUILT FOR THE SHOP FLOOR • Preview stock material removal during 3-axis milling playback • Open NC files from Files, AirDrop, or other apps • Edit with line navigation, search, and replace • Review very large programs in a focused read-only mode • Inspect 3-axis and 5-axis toolpaths with rapid, feed, and arc motion clearly distinguished • Visualize lathe stock changing as material is removed during turning playback • Trace FANUC macro execution flow and machine state • Organize machine and tool definitions • Calculate feeds, speeds, scallop height, and surface-finish references • Browse practical G/M-code reference content LOCAL-FIRST WORKFLOW Core editing, parsing, preview, simulation, library, and calculator workflows run on device. Your NC files do not need to be uploaded for these tools. USE IT FOR • Shop-floor program checks before machining • On-site edits and troubleshooting • Training and toolpath review • Keeping machining references close at hand iNC-Mill supports human review and visualization. It does not replace professional verification, collision checking, or your machine, tooling, fixture, and workplace safety procedures. SUBSCRIPTIONS Monthly and yearly options, and any available trial, are shown in the App Store at purchase time. Payment is charged to your Apple ID after confirmation. Subscriptions renew automatically unless canceled at least 24 hours before the end of the current period. Manage or cancel in Settings > Apple ID > Subscriptions. Terms of Use: https://inc-mill.com/en/terms Privacy Policy: https://inc-mill.com/en/privacy