EVNNE Official Light Stick vs Lightstick Controller

This is the mobile app for the EVNNE Official Light Stick. The app supports EVNNE official light stick. [MAIN FEATURES] 1. CONCERT MODE Pair your light stick with your concert seat information to enjoy various light stick performance during the concert. This menu will only be available during the concert period. 2. CONNECTING TO BLUETOOTH ON YOUR SMARTPHONE Press the button on the light stick for 3 seconds to set up the “Bluetooth mode”. Turn on the Bluetooth function of your smartphone and hold your smartphone close to the light stick to sync them together. Some smartphones require the GPS function to be turned on to enable Bluetooth connectivity. If you cannot connect to Bluetooth, please turn on the GPS function. 3. SELF MODE When your light stick is successfully connected to your smartphone, changing the color on the color wheel of the app will change your light stick color accordingly. 4. BATTERY LEVEL CHECK In the “SELF MODE” page of the app, click the “Check Battery Status” button at the bottom of the screen to check the battery level of your light stick and replace the battery if needed. ※ This function may differ ​​depending on battery performance and smartphone model. [NOTICE BEFORE CONCERT] - Check the seat information on your ticket before the concert and enter it into your light stick using the app. - To take part in the light stick performance, be sure to set the light stick to “Concert mode” by pressing its button for 3 seconds after pairing it with your seat information on the app. - If the light stick’s wireless performance does not work properly, it may be due to unsuccessful pairing or not completing the pairing process. Please complete the pairing process using the app. - Please be seated in the same seat you registered for your light stick. Moving to another seat may result in different light stick performance. - Check the battery level of your light stick in advance to ensure battery sufficiency during the concert. - There will be a Wireless Control Fanlight Support Center located at the venue. [REQUIRED ACCESS] To use the app and the light stick, the following accesses are required. ※ To grant access, please tap the [Allow] button when the pop-up appears. - DEVICE STORAGE: To store the QR/barcode, seat information, etc. - PHONE: To read the phone status and its identity - CAMERA: To read the QR/barcode - GPS: To connect to Bluetooth - BLUETOOTH: To connect the light stick

Control BLE (Bluetooth Low Energy) lightsticks (penlights) from your smartphone. Pick colors, build light shows synced to your songs, and even run two lightsticks on separate lines — all in one app. ■ Real-time color wheel Drag the color wheel to pick a color, and your lightstick changes instantly. HEX input, 12 preset colors and favorites are supported, and brightness goes from 0 to 100%. "Rainbow" keeps the colors flowing without picking one. ■ Lighting patterns Off, Solid, Blink, Fade In, Fade Out, Pulse, Inverse Pulse and clap patterns (PPP / Pa-pan), with adjustable cycle time. Two-Color Mode alternates between two colors. ■ Scores for automatic light shows Build color changes on a timeline as a "score": set the color, brightness, pattern and length of each cue, then play the show with one tap. Work in seconds, or by BPM and note values. Copy and paste cues, repeat groups, pause and jump during playback, and add a start delay with a countdown beep. ■ Two lightsticks on separate lines (Plus) Connect two lightsticks and give each its own show with a score's Line 1 and Line 2. Swap which one is Line 1 on the connection screen; playback shows both colors and timelines side by side. Single-line scores send the same show to every connected lightstick. ■ Play in sync with music (Plus) Link a song from your music library to a score to play music and lights in sync. "Check BPM" analyzes the whole song for its exact tempo, which you can apply to the score. ■ Auto-generate scores from music (Plus) Analyze a song to create a light show that follows its structure. Choose the range to analyze, then edit the result in the editor. ■ Setlists for full shows (Plus) Arrange scores in song order as a "setlist" and play a whole concert automatically, with adjustable gaps between scores. ■ Music Reactive Analyzes music in real time as it plays and changes your lightstick's color and brightness to its frequencies and beats. * Song analysis (Check BPM, auto-generation, Music Reactive) works only with songs that are not DRM-protected, so Apple Music streaming tracks cannot be analyzed. ■ Share scores Export scores as JSON files to share them (export requires Plus). Importing works on the free plan too (up to 30 seconds). Two-line scores require version 1.10 or later. ■ Supported devices - FRUITS ZIPPER OFFICIAL FAN LIGHT - KING BLADE X10 V (Color Tuning Mode) - Other BLE-compatible lightsticks (auto-detection available) Unlisted devices may also work: auto-detection tests command patterns to find one that fits. ■ Free features - Connect and control one lightstick (including Rainbow) - Lighting patterns - Create and edit scores (up to 5, 30 seconds each) - Create and edit BPM-mode scores - Music Reactive ■ Subscription - Plus: ¥100/month in Japan (local pricing elsewhere, shown before purchase), with a 2-week free trial - Unlocks two lightsticks on separate lines, setlists, unlimited scores (no length limit), score export, music-synced playback with Check BPM, and auto-generated scores - The free trial converts to a paid subscription when it ends - Payment is charged to your Apple ID at confirmation of purchase - Renews automatically unless canceled at least 24 hours before the end of the current period - Manage or cancel in the Settings app > Apple ID > Subscriptions Note: - This app is not an official app of any lightstick manufacturer - A BLE-compatible lightstick is required separately - Compatibility with all BLE lightsticks is not guaranteed Terms of Use (EULA): https://lscon.pages.dev/en/terms.html Privacy Policy: https://lscon.pages.dev/en/privacy.html