Morse Decoder AI vs FT Control for YAESU

The Morse Decoder AI is an application for decoding Morse code signals using artificial intelligence. The application is designed for use by amateur radio enthusiasts for educational purposes. The Morse decoder listens to the audio stream through the microphone or line input and, upon detecting Morse code signals, decodes them into text. The neural network of the application is trained to decode signals with a speed ranging from 10 to 40 words per minute within a frequency range of 200 Hz to 900 Hz. The application supports two modes of operation: direct (default) and tone filtering mode. In direct mode, the neural network will attempt to decipher Morse code signals in the audio range of 250 Hz to 900 Hz. This mode is suitable for confident reception of Morse code at levels of 7db-9db on the S-meter. The tone filtering mode is ideal for decoding Morse code from noisy weak signals in the presence of radio interference. The audio input signal is first filtered using band-pass filters before being passed to the neural network for decoding. This mode allows for the decoding of faint signals, but it requires the accurate specification of the signal's tone frequency. Each radio amateur selects their own CW tone frequency in the transceiver settings, and it is important to tune precisely to the carrier frequency using the ZIN/SPOT button in YAESU transceivers, or the AUTOTUNE button in ICOM transceivers. There are 3 band-pass filter options available: 25Hz, 50Hz, 150Hz. If you can accurately determine the CW signal tone frequency, using the 25Hz filter, you can decode very faint Morse code signals. The application offers two neural network options: A and B, which can be easily switched in the interface. Network A is recommended for use with stable signal transmission with a constant duration of dots and dashes, while network B is recommended when using a straight key, where the duration of dots and dashes may vary. You have the ability to switch between these networks in real time and observe how each network hears and decodes Morse code. It is important to monitor the level of the incoming audio signal, for which the application provides a sound level indicator. Ensure that the signal is not too quiet or too loud. It is recommended to maintain the signal around -7db, which is sufficient for decoding. Keep in mind that higher audio frequencies are quieter than lower frequencies. Additionally, the application provides various color themes, allowing radio enthusiasts to customize the appearance of the application for comfortable use.

Your Yaesu FTdx101 (D or MP), FTdx10 or FT-710 on your iPhone and iPad: at home over Wi-Fi or from anywhere over the internet. Made by a ham, for hams, with personal support included. FT-Control connects to your radio through Yaesu's SCU-LAN10 network interface, at home and over the internet. No PC and no extra software needed. WORKS WITH ■ FTdx101D and FTdx101MP ■ FTdx10 ■ FT-710 Each radio connected to a Yaesu SCU-LAN10, which is needed both for Wi-Fi at home and for remote access over the internet. A USB cable connection is not supported. OPERATE ■ Spectrum scope and waterfall with band plan, DX Cluster and FT8 spots; both receivers with their own waterfalls (FTdx101) ■ Main and Sub VFO, filters, IPO, attenuator, NB, DNR, DNF, notch, AGC and more ■ Compact floating panels: tuning, PTT, CW, memories, tune stack, macros, Command Bar, DTMF, RIT / ∆TX ■ Your iPhone or iPad as microphone and speaker; the radio keeps playing in the background ■ Ready for iPhone Duo, iPad split screen and Apple Vision Pro MODES ■ FT8-Improved with AutoAnswer and AutoCQ, plus the classic FT8 ■ JS8 keyboard chat ■ CW with decoder, keyer, ESM and CW keyboard: send CW remotely, by keyboard or with a paddle on a CTR2 or MIDI controller ■ Speech: incoming voice transcribed and translated, your typed text sent as speech ■ SSTV, HF-Fax, APRS and WSPR FT8-Improved, JS8, Speech and WSPR need iOS 26. TOOLS ■ Logbook with ADIF import and export, shared via iCloud with SmartSDR, SDR-Control, TS-Control and K4-Control, on iPhone, iPad and Mac ■ DX Cluster with alerts, POTA, PSK Reporter, Call Lookup, Band Plan, Network Stats, Memories ■ Controllers: MIDI, CTR2, HaliKey, Pryme, Flic ■ 4O3A Genius devices, Ultra Beam antennas, rotators and relay boards MADE BY A HAM Made by Marcus, DL8MRE, who has been developing apps for Apple devices since 2009 and uses this app every day in his own shack, where all supported radios are on the desk. Personal online support and a detailed manual are included. Updates with new modes and features are free: no subscription, no in-app purchases. WHAT YOU NEED ■ One of the radios above with a Yaesu SCU-LAN10, both on your network ■ An iPhone or iPad with iOS 18 or later ■ For use over the internet: access to your home network from outside (see the manual) Manual: https://go-to.me/ft-control-ios-manual More apps: https://ham-radio-apps.com FT-Control is developed independently and is not affiliated with or endorsed by Yaesu.