KQ MIDI Modulate vs Dirigo

This is a tool for MIDI experts. Not recommended for beginners. - This app by itself does not produce sound. - It converts input MIDI signals and outputs them. - You can use 8x16 pads to output any MIDI signal. - You can route MIDI devices freely. - This app includes 2 AUv3 Plugins. - Compatible only with MIDI 1.0; MIDI 2.0 is not supported. - The developer uses this app conveniently with a MIDI wind controller. Convert Converts the values of control signals. Cannot be set per channel. Note Ctrl, Threshold: Transmit note on messages only if the value of the Note Ctrl is above the threshold. Key: Key of the note signal Vel1: Velocity of Note On Vel0: Velocity of Note Off CC: Control Change AT: Channel Aftertouch PB: Pitch Bend PC: Program Change N/A: Not applicable HR: High Resolution - when enabled, handles 14-bit signals. E: Envelope, tap to open the settings window. F: Filter, tap to open the settings window. LPF: Low-pass filter, smoothes out value changes. The higher the Strength value, the slower the change. HPF: High-pass filter, applies only abrupt value changes. The value automatically approaches the Return Base value. The higher the Strength value, the faster the change. Tap the graph to switch between line graph, history, and bar graph. Long press the graph and tap “Edit Curve” to edit the curve. "- 0 +" denotes the offset; this value is added to the input value. Press the button in the top left corner to switch to a minimized view. The "!" in the top right corner is the panic button. Pressing it sends All Notes Off and All Sound Off messages. Trigger Sends signals according to the rules upon receiving specified MIDI signals. You can specify channels. Harmony: Shifted note signals Channel Rewrite: Rewrite of channels Signal Trigger: Trigger of any MIDI signal Value Offset: Increment/decrement of value Filter: Suppression of transmission Pad Consists of 8x16 pads. Note: Note signal CC/AT/PB Oneshot: Control signal (when pressed) CC/AT/PB On/Off: Control signal (press/release) Program: Patch Change (bank selectable) Convert Offset: Offset specification for the Convert screen Load Preset: File loading on the Profiles screen Misc/SysEx: Any signal Latch: Pads become toggles. If a group is specified, the pads act as radio buttons. Options Key Delay: Delays Note On Velocity Convert: When outputting Vel1 in Convert, select whether to always convert or only when legato is not present MIDI Rx Channel: Receiving channel MIDI Tx Channel: Transmitting channel Filter Other Channel: Suppress transmission of channels other than receiving channel Duplicated Notes: Specifies handling of duplicated notes Note that: The application and description contain machine-translated text.

Dirigo is one remote for your home theater, on iPhone, iPad and Apple Watch. It controls current Marantz and Denon AV receivers directly over Wi-Fi, well beyond what the bundled remote can do, and with Home Assistant it works without one. WHAT YOU CAN DO • Power, volume, every input and every surround mode your receiver supports • Browse and play HEOS streaming sources — Qobuz, TIDAL, Amazon Music, TuneIn, and the rest • Manage the queue, see what is playing, skip tracks, view history • Control each zone on multi-zone receivers • Configure room correction, speaker levels, HDMI output, video settings, and the deep menus your physical remote pretends don't exist • Activate Quick Selects you have programmed on the receiver • Home Screen and Lock Screen widgets, and an Apple Watch app • Siri and Shortcuts ("Toggle mute with Dirigo", "Set volume with Dirigo") ACTIVITIES One tap sets the whole room: turn on the receiver and the TV, pick the input, set the volume and the lights. Every step reports what actually happened, and Activities run from Shortcuts too. TELEVISION REMOTES Pair the television or streaming box in the same room and Dirigo becomes its remote too. Apple TV gets a touchpad — swipe to navigate, tap to select — along with transport buttons and the Apple TV's own Control Centre and app switcher. Android TV, Google TV and NVIDIA Shield get a D-pad, Back and Home, and play, pause and skip. Dirigo tells you which app is on screen. Volume routes back to your receiver, and a now-playing card on your home screen shows what is on — title, artist, artwork, and how far through it is. Drag the progress bar to jump to a moment. Pairing is a one-time setup: Dirigo finds the television on your network and you type in the code it puts on screen. CUSTOM REMOTES (HOME ASSISTANT) Build remotes from the devices on your own Home Assistant server. • Add lights, switches, fans, buttons, scenes, scripts and sensor readings, and arrange them your way • Add a D-pad or a transport row and choose what each button drives • A Now Playing remote for a Home Assistant media player: artwork, progress, play and skip, volume • Show an infrared appliance on the Home screen: its inputs, volume and power, with a full remote for everything else • Put Home Assistant lights and scenes on your receiver's Home screen buttons • No Denon or Marantz receiver? Choose "Connect Home Assistant" when you first open Dirigo DEMO MODE No receiver to test against? Tap "Explore Demo Mode" on the Welcome screen to explore the app with a synthetic receiver, Apple TV and Android TV. PRIVACY Dirigo collects nothing. No analytics, no identifiers, no third-party tracking SDKs, no Dirigo account. All receiver, television and Home Assistant control happens on your local Wi-Fi network; Dirigo refuses Home Assistant Cloud and internet addresses. If you connect Home Assistant, its access token is stored in your iPhone's keychain and sent only to your own Home Assistant server. The only public-internet activity is album art: when you browse a HEOS streaming source, or show a Home Assistant media player whose cover is hosted by a music service, iOS loads the picture from that service's own image address, anonymously. Full policy at bit0100bitsoftware.com/dirigo-privacy. REQUIREMENTS A current-generation Denon or Marantz AV receiver with HEOS (Cinema 50, SR-series, AVR-X-series and similar), or a Home Assistant server. iOS 18 or later. Your receiver or Home Assistant server must be on the same Wi-Fi network as your iPhone. Apple TV pairing requires tvOS 18 or later. Android TV pairing works with Android TV and Google TV devices that support the built-in remote pairing service, including NVIDIA Shield. Dirigo is an independent third-party app and is not affiliated with, endorsed by, or sponsored by Sound United, Denon, Marantz, Apple, Google, NVIDIA, or the Open Home Foundation. Home Assistant is a trademark of the Open Home Foundation.