FFF vs EVen

# FFF – 3D Photos for Everyone 누구나 쉽고 빠르게, 복잡한 편집 과정 없이 간편하게 3D 사진을 만들 수 있습니다. FFF는 특별한 촬영 장비나 전문적인 편집 기술이 없어도 새로운 시각적 경험을 만들고 공유할 수 있도록 도와주는 사진·영상 콘텐츠 플랫폼입니다. 일반 사진에 FFF만의 모션 효과를 적용하여 생동감 있는 3D 콘텐츠를 제작할 수 있습니다. 사진을 선택하고 원하는 효과를 설정하면 FFF가 자동으로 편집을 진행합니다. FFF F1, F2, F3, F4, F2x2 렌즈로 촬영한 사진도 자동 편집으로 빠르게 완성하거나, 수동 편집을 통해 원하는 방식으로 직접 조정할 수 있습니다. 완성된 3D 사진과 FFF 렌즈 콘텐츠는 바로 확인하여 기기에 저장하거나, FFF 게시물로 공개해 다른 사용자들과 공유할 수 있습니다.

Read the light. Focus on the photograph. EVen is a reflected-light meter that uses your device’s camera exposure information to calculate ISO, aperture, and shutter speed. Continuous metering, priority modes, and exposure compensation come together on one clear screen. • Continuous or tap-to-meter Tap the center box to switch between LIVE and TAP. The label at the top shows the current mode. Continuous metering starts on launch and resume. In tap mode, tap the bottom meter button for a fresh reading that stays until your next tap. Your choice is remembered, and the screen stays awake while you use the app. • Pick up where you left off Your last A/S/M mode, ISO, aperture, shutter speed, and exposure compensation are saved automatically on your device. Reopen the app with your chosen values intact. Only the automatic value updates with the light: shutter speed in A mode, aperture in S mode. No need to set up again. • Choose your priority In A mode, set ISO and aperture to calculate shutter speed. In S mode, set ISO and shutter speed to calculate aperture. In M mode, adjust all three values and see the difference from your target exposure. • Make exposure your own Adjust from −3 to +3 EV in ⅓-stop steps. Positive compensation recommends a brighter exposure; negative compensation recommends a darker one. Apply compensation to a measured result and reset to 0 EV with one tap. • Familiar stop increments Choose full, half, or third stops independently for aperture and shutter speed. Your choice applies to the dial and calculated recommendations. • Camera data, designed for accuracy Exposure values are calculated from the ISO, aperture, and shutter-speed metadata reported by your camera. • Center spot or center weighted Center spot is the default. Choose center-weighted metering in Settings. On supported devices with iOS 26 or later, the spot region matches the inside of the center box. Unsupported regions fall back to center-weighted or automatic metering, with the applied method shown on screen. • A layout that fits your screen Wide and landscape windows place the preview and controls side by side. Portrait screens fit the preview and controls without scrolling. Very large accessibility text or unusually short windows can still scroll. • Guided camera calibration Follow a simple guide to compare with a reference camera or meter. Device calibration is stored locally and kept separate from creative exposure compensation. • A quieter interface Appearance and language follow your system by default. You can also choose light or dark mode and select Korean or English. Target settings span ISO 25–25600, f/1–64, and 30 seconds–1/8000 second. • Private by design No account, ads, or in-app purchases. Camera frames and meter readings are never saved or uploaded. A physical iPhone or iPad with a rear camera and camera permission is required. The displayed exposure settings are intended for your camera or film; they do not change the phone’s physical aperture. Reflected-light readings vary with subject reflectance, backlighting, very low light, and device characteristics. Compare and calibrate against a reference meter before important shoots.