PR electronics PPS vs RMU3 Config

The PR electronics Portable Plant Supervisor - PPS - app enables smart control, monitoring and maintenance of PR electronics' signal conditioning devices with mounted communication enabler, i.e. devices in the PR-4000 and PR-9000 series. The app shows live data – directly from the signal conditioning device – anywhere at any time. It is designed for technical and maintenance staff as well as plant operators working in process and factory automation industry. All you need, to set-up a user friendly remote interface for monitoring and programming of your devices, is to download the app and connect to the communication enabler attached onto the signal conditioning device using Bluetooth. Requirements: • Data can be monitored and devices can be programmed remotely using the PPS app in connection with a 4512 communication enabler mounted on a device in the PR-4000 series or the PR-9000 series. Supported devices: • Devices in the PR-4000 series with mounted communication enabler. • Devices in the PR-9000 series with mounted communication enabler. Features: • Remote device monitoring, simulation and programming. • Detailed view of all parameters, monitoring, programming, simulation, discovery, features for PR devices, additional graph functionality for selected functions, connection quality • Intuitive user interface • Start, stop and share logging of data. • Save and share your configuration for documentation or future use. • Load an already saved configuration onto a similar PR-4000 or PR-9000 series device. Licenses: To see the licenses of the public libraries used in the PPS app, see: https://www.prelectronics.com/applicenses/ Privacy: The app does not collect or share data. To see the privacy policy of PR electronics, see: https://www.prelectronics.com/privacy/ PR electronics designs and manufactures signal conditioning devices for process and automation industry. More info and support at http://prelectronics.com/communication.

*** Requires a corTalk® RBT1 or RMU123PGM and RMU3 to use. *** Contact us at 'sales.rmu3@mobiltex.com' to purchase. This app is for configuring the corTalk® RMU3 (Remote Monitoring Unit 3) with a Bluetooth configuration interface. Both the RBT1 or RMU123PGM are compatible. They both function as a complete RMU3 programming interface but only requires the Bluetooth connection of your phone to use. The RMU3 is used to monitor a cathodic protection rectifier with accurate measurement of a wide variety of signals; it can also control the rectifier for survey operations by switching a relay at precisely timed intervals. This app allows access to diagnostic information on the RMU3 and allows setting up the configuration to meet the customer's needs. Note that measurement data logs, due to their size, can only be extracted from the RMU3 using the PC configuration application through the USB port. The app allows full configuration of the RMU3 including - slot measurement types - limits - slot scaling and offset - relay options - instant off timing - interruption On/Off/Cycle Other features include the - viewing of readings and their limits - detailed status screen for troubleshooting - integrated manual - wiring diagrams for each measurement type The RBT1 and RMU123PGM is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be found and changed with the app. Once paired, the iOS device can reconnect without needing to re-enter the code. The RBT1 pairing code can be reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet.