EA257 REMOTE CONTROLLER vs Spool Programmer

This app is designed to work together with the EA257 interface, which is a modern alternative to the old and often no longer working 257 model steppers. Now, you can easy select and play any of the 104 music from your 104 selection Jukeboxes First of all you need to connect the app to the interface as follow: (please be sure your Bluetooth interface is enabled) 1) tap on wallbox image. The searching procedure will be started showing a yellow ball rotating 2) wheen connected the blu message "CONNECTED TO: EA257" will appear 3) now you can choose A,B,C or D letter and one of 1 to 26 disk tapping on app button 4) The SEND button will be yellow when ready to send the selection to the interface 5) Tapping on yellow SEND button you will made by the EA257 interface the selection on Jukebox Questa app è stata progettata per funzionare insieme alla interfaccia EA257 che è una versione moderna del famoso stepper 257 ormai introvabile. Adesso è possibile selezionare da remoto uno qualsiasi dei brani musicali del tuo Jukebox. L'interfaccia funziona solo con i Jukebox da 104 selezioni Prima di tutto è necessario connettre l'app ala interfaccia come segue: (assicurarsi di avere l'interfaccia Bluetooh attiva) 1) tap sull'immagine del wallbox. 3 palline gialli inizieranno a ruotare indicando l'avvio della ricerca. 2) A connessione avvenuta il messagio blu "CONNECTED TO: EA257" sarà visualizzato 3) Adesso sarete pronti a selezionare una delle 4 lettere A,B,C or D letter e uno dei numeri tra 1 e 26 semplicemente cliccando sul pulsante 4) Il bottone SEND diventerà giallo quando sarete pronti ad inviare il comando 5) Cliccando sul pulsante giallo SEND si effettuerà tramite l'interfaccia la selezione sul Jukebox.

Transform your 3D printing workflow with Spool Programmer, the essential tool for programming RFID tags on your filament spools. Whether you're using Anycubic printers or building your own filament management system, this app makes tag programming simple, fast, and reliable. POWERFUL FEATURES • Write complete filament data to NTAG215/216 tags in seconds • 18 pre-configured profiles covering all major filament types • Read existing tags to verify or clone configurations • Check tag status and memory layout • Format tags for fresh programming • Custom color selection with RGB sliders and 16 presets • Support for 500g, 1kg, and 2kg spool sizes • Configurable print temperatures (nozzle, bed, chamber) FILAMENT TYPES SUPPORTED PLA, PLA+, PLA Matte, PLA Silk, PETG, ABS, TPU, Nylon, ASA, PC, PVA, HIPS, and BVOH. Each profile includes optimized default temperatures that you can customize. INTUITIVE INTERFACE Beautiful card-based design that guides you through every step. Select your filament type, choose a color, adjust temperatures, and write—all in a clean, modern interface that follows Apple's design guidelines. SMART & SAFE • Automatic detection of write-protected tags • Clear error messages with helpful guidance • Validates tag compatibility before writing • Preview data before committing to tag • No account required, no tracking, no ads PERFECT FOR • Makers managing multiple filament spools • 3D printing enthusiasts with Anycubic printers • Anyone building custom filament management systems • Hackerspaces and makerspaces • Professional print farms TECHNICAL DETAILS Supports standard NTAG215 and NTAG216 NFC tags with 144-byte user memory. Uses the same data format as the ACE-RFID project, ensuring compatibility with existing ecosystems. All processing happens on-device—your data never leaves your iPhone. REQUIREMENTS iPhone 7 or later with NFC capability running iOS 16.0 or later. You'll need blank NTAG215 or NTAG216 tags (widely available online). Note: Pre-programmed manufacturer tags may be write-protected. FREE & OPEN Based on the community-driven ACE-RFID project. No subscriptions, no in-app purchases, no data collection. Built by makers, for makers. Start programming your filament tags today and take control of your 3D printing workflow!