PumpWater vs Water Eject

PumpWater is a dedicated tool that pushes water out of iPhone and iPad speakers using precise acoustic signals — after rain, sweat, swimming, pool parties, summer music festivals, or any water exposure. No teardown, no suction tools. The app plays a waveform tuned to the frequency band where the device speaker vibrates most efficiently, driving water droplets out of the grille. ■ How it works iPhone and iPad speakers are sealed air-chamber structures with a natural resonant frequency around 140–200 Hz, depending on the model. PumpWater plays tones in that band so the diaphragm moves at maximum amplitude, and the resulting airflow pushes water droplets clinging to the grille outward. Small droplets held by surface tension don't easily fall off with a simple shake. PumpWater uses acoustic vibration to apply repeated acceleration to the droplets, with a signal designed to deliver the momentum needed to detach them efficiently. ■ Key features - 4 presets · Standard 165 Hz — recommended for most situations · Deep Clean 200 Hz — strong action for deeper water · Fine 145 Hz — gentler with reduced vibration · Auto Sweep 130–220 Hz — sequentially targets droplets of various sizes - Precision frequency slider (20 Hz to 2,600 Hz) — fine-tune by hand - Gyro-linked visualization — tilt your device and the on-screen liquid moves with it, so you can confirm operation at a glance - Hands-free timer (up to 10 minutes) — set it down on a flat surface and walk away - Works in silent mode — unaffected by the ringer/silent switch - iOS 26 Liquid Glass design — automatic light/dark adaptation plus tinted icon support - iPad-specific layout — two-pane design that uses the larger screen - Background usage option — unlock by watching a single rewarded ad (optional) ■ When to use it - Right after your device is exposed to rain, sweat, or pool water - When call audio or speaker output sounds muffled - For routine care after workouts and outdoor activities ■ Tips 1. Place the device on a flat surface with the speaker grille facing down 2. Start with the Standard (165 Hz) preset 3. If results are limited, switch to Auto Sweep to cover the full frequency band 4. Keep each session running for at least 2–3 minutes 5. Lightly shake the device between sessions to drain dislodged droplets 6. After deep submersion, repeat several sessions ■ Safety - Recommended operating band: 100 to 2,000 Hz - For frequencies above 2,000 Hz, lower the volume and keep sessions short to protect your hearing - Avoid combining 80%+ volume with high frequencies for extended periods - Do not place the speaker directly against your ear, and avoid loud playback in public spaces - PumpWater does not repair internal circuitry damage from devices that are already water-damaged. For serious submersion, contact an authorized service center first. ■ Privacy PumpWater does not collect or store your personal data, contacts, location, photos, or microphone input. Only Google AdMob's anonymous identifiers are used to serve ads, and personalized ads can be turned off in the in-app settings. See the in-app privacy policy for details. ■ Ads PumpWater is a free, ad-supported app. - Banner ad at the bottom of the home screen - Interstitial ads before some actions - Background usage is unlocked by watching a rewarded ad (optional) There are no in-app purchases or subscriptions. ■ Compatibility - iOS 18.0 or later - iPhone and iPad supported - iOS 26 Liquid Glass design supported ■ Disclaimer PumpWater is an assistive tool that uses acoustic vibration and does not guarantee complete water removal in every scenario. Results may vary depending on device model, severity of submersion, and how quickly you respond after exposure. This app is a third-party app and is not affiliated with Apple, Inc.

Push water out of your speakers & restore crystal-clear sound Have you ever played music and noticed muffled or distorted sound after your phone got wet? Stop worrying — use Water Eject & Speaker Test to clean and restore your speaker’s sound in seconds. Overview Water Eject & Speaker Test is a professional tool designed to remove water, clear moisture, eliminate dust, and test your speakers with frequencies from 0–25 kHz. What makes it different? You can compare before and after results and immediately notice the sound improvement. Key Features * Automatic & manual water eject: one tap or set your own frequency to push water out of the speaker. * Speaker Test: play frequencies from 0–25,000 Hz to check speaker integrity and sensitivity. * Detect & fix muffled or distorted sound: restore missing bass and weak audio with sound wave technology. * Multi-frequency cleaning: apply layered low, mid, and high frequencies for deeper cleaning. * Dust & moisture removal: expel fine dust particles and humidity that affect sound quality. * Stereo / individual speaker test: check left and right speakers separately to identify issues. * Simple interface – quick results: clean design, no intrusive ads, easy to use from the first try. Benefits * Restore clear, vibrant sound like new. * Prevent water damage and extend the life of your speakers. * Quickly detect faulty or buzzing speakers. * Save money on repairs or speaker replacements. * Use after exposure to water, rain, shower, or moisture. * Works with iPhone, iPad, and other iOS devices. How to Use 1. Open the app → select Water Eject mode 2. Choose automatic or manual → tap “Start” 3. Wait a few seconds while the app expels water and cleans 4. Go to Speaker Test → play test frequencies 5. Compare before & after to hear the difference Proven & Trusted Thousands of users have restored speaker performance after water exposure. Built with safe algorithms — no damaging pressure, no harm to your speaker hardware. Call to Action Don’t let muffled sound ruin your experience. Download Water Eject & Speaker Test now to restore speaker clarity, test audio quality, and protect your device from moisture damage. * For best results, place your device face down with speaker pointing downwards and increase volume near maximum during eject. * Avoid using very high volume for long periods — the app is designed with safe limits. Update: - Fix bugs - Optimize speed - Support more languages Water Eject & Speaker Test – remove water, clean, and test frequencies up to 25 kHz to restore clear sound.