RS vs Packet Commander

[Features] The RS-MS3I is an iPhone or iPad application designed to expand the DV mode capability of a D-STAR transceiver using a Terminal or an Access Point mode. These modes enable D-STAR operations by sending signals from the D-STAR transceiver over the Internet, even when that transceiver is out of the range of a D-STAR repeater. The transceiver sends your voice signals using an Internet, LTE, or 5G network, through an iPhone or iPad. 1. Terminal mode By operating the D-STAR transceiver through the iPhone or iPad, you can contact other D-STAR transceivers. In the Terminal mode, the transceiver will not transmit an RF signal, even if [PTT] is held down, because the microphone audio signal is transmitted through an Internet, LTE, or 5G network. 2. Access Point mode In this mode, the D-STAR transceiver functions as a Wireless LAN access point. The D-STAR transceiver repeats the received signal from the iPhone or iPad, to other D-STAR transceivers. Refer to the instruction manual (PDF) for setting details. The instruction manual can be downloaded from the ICOM website. (URL: https://www.icomjapan.com/support/manual/) [Device requirements] iOS15 or later [Usable transceivers] (As of March 2026) - ID-52A PLUS or ID-52E PLUS Note: - This application operates on iPhone or iPad as a gateway server on the D-STAR system. Therefore, a public IP address must be set on either the iPhone, iPad, or the Wireless LAN router. - Ask your mobile carrier or ISP for a public IP address. According to the contract, communication charges and/or communication packet limits may occur. - Ask your mobile carrier, ISP, or manufacturer of your iPhone, iPad, or router about public IP setting details. - Icom does not guarantee that the RS-MS3I works on all iPhone and iPad. It may not work properly, depending on the OS version, installed applications, or other reasons. - When a Bluetooth headset is connected to the transceiver, depending on the combination of your iPhone or iPad and the Bluetooth headset, sound may be interrupted, and communication may not be possible. In such cases, please disconnect the Bluetooth headset before use. - Turn OFF the Wireless LAN function when communicating through an LTE or 5G network. - Operate your transceiver with the RS-MS3I in compliance with appropriate regulations. - Icom recommends that you operate them with a club station license.

Packet Commander brings a classic terminal experience for packet radio to your iPhone or iPad. Try it free. The download includes 5 full connection sessions so you can explore the features and confirm compatibility before purchasing. After that, a purchase is required to continue connecting. Note: An amateur radio license is required to operate on the air. Powerful Terminal • Full-screen terminal for interacting with packet nodes and BBS over amateur radio • Classic color themes inspired by iconic computers • Adjustable fonts and layout for readability and screen efficiency • YAPP protocol support for file transfers • Dictation-ready for composing messages hands-free • Smart filename selection — double tap to highlight and copy Smarter Packet Connections • Location-aware digipeater routing: automatically recalls the last-used path at each location • Seamless iCloud sync for nodes and digipeaters across all your devices • Compatible with popular packet node software including BPQ32, URONode, and others Over-the-Air Monitor Connect to your radio and decode over-the-air traffic in real time. AX.25 frames are decoded and presented in an easy-to-read format. • Filter traffic to display exactly what you’re looking for • Search by address or content • Export the log to a file for later analysis Works with the Gear You Love • Auto-discovery of Bluetooth and TCP TNCs, including Dire Wolf on DigiPi • Automatic frequency set/restore on supported radios • Built-in, high-performance 1200 baud AFSK software modem • Optimized for VHF/UHF packet at both 1200 and 9600 baud Compatible with the Following Radios and TNCs: Radios with Built-in TNCs (Auto-sets and restores frequency on those radios) · BTECH UV-PRO, UV-50PRO · VERO VR-N76, VR-N7600 · RADIODITY GA-5WB, DB50-B · Kenwood TH-D74*, TH-D75* · PicoAPRS V4 *Requires B.B. Link Bluetooth adapter Portable KISS TNCs · Mobilinkd TNC3, TNC4 · LiNK500 TNC · DigiPi · Dire Wolf Software TNC Audio Interfaces (Using built-in software modem) · Digirig Lite · Digirig VOX PTT Cable · AIOC (All-In-One Cable) Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/