Screen Mirroring to iPhone vs ProScope Solar

The app transmits the screen image from iPhone/iPad to another iPhone/iPad. In other words, it is a screen mirror for two iPhone (it is possible to broadcast the screen image simultaneously to several iPhones/iPads). The two devices use peer-to-peer Wi-Fi, which allows the devices to communicate directly, even if they are not on the same Wi-Fi infrastructure network. This technology is used by AirPlay®, AirDrop®, etc. In other words, Internet access or a Wi-Fi router is NOT needed. The maximum distance at which a connection can be maintained between two devices is about 20 foot. The app can work on iOS 12 and newer. This makes it possible to use older iPhone starting with the iPhone 5S and later. Two adjacent iPhones/iPads are connected automatically. To do this: • Launch this app on both devices. • Select a role for each device (sending a screen image or receiving a screen image). • Turn on Wi-Fi on both devices. • Start screen broadcast on the device that should share the screen image. Screen image sharing can be done to several devices (up to 5). In order to be able to connect several devices receiving the screen image ("mirrors") to one "screen", you need to select the required number of "mirrors" in the application settings on the device that shares the screen image. However, you cannot select a larger number of "mirrors" than you will use. If you connect several "mirrors", but one of the devices acting as a "mirror" cannot connect or does not receive the screen image, then in the "screen" settings you need to reduce the number of "mirrors" to the number of "mirrors" that receive the screen image. This prevents the connection of foreign devices that are nearby. In case of using several "mirrors" for several users, in the "screen" settings there is an option to lock changing the frame rate and image quality through the "mirror" settings. Please note that when connecting multiple "mirrors", the settings for transmitting the screen image change to the settings set on the "mirror" that was connected last. When the aspect ratio of the display of the "screen" and "mirror" is different, black margins are obtained. This is especially noticeable when broadcasting the screen image from an iPhone to an iPad. In this case, to enlarge the screen image to a size where there are no black margins, just quickly double-tap the "mirror" display (in the area where there are no settings elements and buttons). The enlarged image can be moved to the sides. If you double-tap the display again, the image will return to its original state. It is also possible to make an arbitrary increase in the image with two fingers, as when viewing a photo. For use when using the app to take photos or videos of yourself, the image can be mirror flipped. In the full version of the app, the frame rate and image quality are adjustable. With "Medium" image quality (the difference with the original is barely noticeable), the maximum frame rate (20* FPS) allows you to watch video transmitted from iPhone to another iPhone/iPad without jerking or delays (both devices must not be old). At "Good" image quality or when transferring an image with "Medium" quality from an iPad, only a low frame rate is available. * - iOS may not transfer screen frames to the app often enough, for example when scrolling. In this case, the frame rate will be lower. But when watching a video, the frequency of sending frames to the app is quite high. If one of the devices is old, then the frame transmission rate may not be sufficient, regardless of whether the device is receiving or sending frames.

ProScope Solar brings your home energy system into one clear live dashboard. If your inverter already reports through EnerWise—and you optionally use an Eco-Worthy battery (such as Cubix)—Solar pulls that telemetry into a focused monitoring app for iPhone, iPad, and Mac. It does not replace the vendor apps or control inverter settings; it reads cloud and BMS data so you can see what the plant is doing right now. WHAT YOU GET • Live dashboard for solar, battery SOC, load, and grid • Energy flow that shows PV, battery, grid import/export, and load • Charts for solar, load, grid, and related metrics • Today / Month / Lifetime energy totals rebuilt from archived chart samples on your device—not unreliable day counters • Multi-PV detail when your inverter reports multiple strings • Display timezone you choose, so timestamps match where the plant lives • Optional Eco-Worthy BMS (Wi‑Fi cloud or nearby Bluetooth) for better battery watts when the inverter report is weak • Demo plant so you can explore the UI without accounts WHO IT’S FOR Homeowners and installers who already use EnerWise for inverter cloud monitoring and want a clearer companion view—especially when day totals or battery power look wrong in the vendor apps. GETTING STARTED 1. Start the free trial (or subscribe) for live monitoring. Demo stays free. 2. Sign in with your EnerWise account (same email/code flow as the EnerWise app). 3. Confirm your plant on the Dashboard and set Display timezone in Settings. 4. Optional: connect Eco-Worthy for BMS data. 5. Open Charts, then download past history so month and lifetime totals fill in. SUBSCRIPTION New installs include a 14-day full-feature trial for live plant monitoring. After the trial, a monthly subscription keeps live EnerWise / Eco-Worthy data. Demo mode remains available without a subscription. Manage or cancel anytime in your Apple ID subscriptions. REQUIREMENTS • An EnerWise-connected inverter / plant • Optional Eco-Worthy battery account or Bluetooth BMS nearby • Internet access for cloud data ProScope Solar is developed by ProScope USA. EnerWise and Eco-Worthy are third-party services; availability depends on those clouds and your hardware. Privacy Policy: https://www.proscopeusa.com/pages/proscope-solar-privacy Terms of Use: https://www.proscopeusa.com/pages/proscope-solar-terms Apple Standard EULA: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/