Olsberg OEC 4 vs Spool Programmer

Application for automatic combustion control OEC 4. The OEC 4 automatic combustion control regulates the combustion process itself by means of a microprocessor unit, which results in optimization of combustion depending on the air supply to the combustion chamber by means of an electronically controlled air damper. Automatic combustion control OEC 4 - optimises combustion depending on the flue gas temperature to maximise efficiency. - meets current emission requirements - prevents the appliance from overheating - ensures safe heating - maintains the combustion process at rated performance - extends the life of the appliance by optimising combustion - all visual and acoustic information is communicated to the customer via the OEC 4 app and directly on the appliance - the ideal time for refuelling is indicated acoustically and visually by an LED directly on the appliance - consumption is reduced by up to 30% compared to appliances without combustion control

Transform your 3D printing workflow with Spool Programmer, the essential tool for programming RFID tags on your filament spools. Whether you're using Anycubic printers or building your own filament management system, this app makes tag programming simple, fast, and reliable. POWERFUL FEATURES • Write complete filament data to NTAG215/216 tags in seconds • 18 pre-configured profiles covering all major filament types • Read existing tags to verify or clone configurations • Check tag status and memory layout • Format tags for fresh programming • Custom color selection with RGB sliders and 16 presets • Support for 500g, 1kg, and 2kg spool sizes • Configurable print temperatures (nozzle, bed, chamber) FILAMENT TYPES SUPPORTED PLA, PLA+, PLA Matte, PLA Silk, PETG, ABS, TPU, Nylon, ASA, PC, PVA, HIPS, and BVOH. Each profile includes optimized default temperatures that you can customize. INTUITIVE INTERFACE Beautiful card-based design that guides you through every step. Select your filament type, choose a color, adjust temperatures, and write—all in a clean, modern interface that follows Apple's design guidelines. SMART & SAFE • Automatic detection of write-protected tags • Clear error messages with helpful guidance • Validates tag compatibility before writing • Preview data before committing to tag • No account required, no tracking, no ads PERFECT FOR • Makers managing multiple filament spools • 3D printing enthusiasts with Anycubic printers • Anyone building custom filament management systems • Hackerspaces and makerspaces • Professional print farms TECHNICAL DETAILS Supports standard NTAG215 and NTAG216 NFC tags with 144-byte user memory. Uses the same data format as the ACE-RFID project, ensuring compatibility with existing ecosystems. All processing happens on-device—your data never leaves your iPhone. REQUIREMENTS iPhone 7 or later with NFC capability running iOS 16.0 or later. You'll need blank NTAG215 or NTAG216 tags (widely available online). Note: Pre-programmed manufacturer tags may be write-protected. FREE & OPEN Based on the community-driven ACE-RFID project. No subscriptions, no in-app purchases, no data collection. Built by makers, for makers. Start programming your filament tags today and take control of your 3D printing workflow!