oVerlegato vs Ring Modulator

Concept: The app is AUv3 MIDI effect and works as “Legato” effect for MIDI instruments using pitchBend. System Requirements: 1. AUv3 host 2. 3rd-party MIDI instrument that has a functionality of pitchBend. Usage: One important calibration 1. Adjust oVerlegato’s pitchBend range to the same value as the one of destination instrument, otherwise it becomes microtonal. There are two buttons & two sliders. 1. “Legato”: it becomes legato mode only while pushing the button. 2. “Channel”: determines MIDI output channel. 3. “pitchBend range”: oVerlegato’s internal pitchBend range (from 12 to 48).” 4. “Panic!”: sends all noteOff message. When notes are accidentally stacked, push this button while pushing any key of keyboard. The rule of playing legato It needs to sustain the first initial note while pushing “Legato”button until the legato sequence ends. Scheme: oVerlegato (MIDI out) -> 3rd-party instrument

Ring modulation multiplies two signals together sample by sample. The result contains the sum and difference of their frequencies, the sidebands, while the original carrier and modulator tones are suppressed. This produces the metallic, bell-like, and clangorous inharmonic timbres associated with classic ring modulators, from robot voices to detuned percussion. Signal path: the carrier is multiplied by the modulator to form the wet signal, Mix blends that against the dry carrier, and Output applies a final makeup gain. Ring Modulator is usable in three modes and can take either mono or stereo inputs. The host app must support mixing to bus inputs or sidechaining in order to use Ring Modulator with dual input. Outputs mono signal. OSC + OSC Both carrier and modulator are internal sine oscillators, set by Car Freq and Mod Freq. Produces classic two-tone ring modulation with no input required, good for bell tones and metallic drones. INPUT + OSC The carrier is your track's audio and the modulator is the internal sine at Mod Freq. This is the standard ring-mod effect: it turns voices and instruments metallic or robotic and adds inharmonic sidebands. This is the default mode. INPUT + SIDECHAIN The carrier is the main input and the modulator is a second, independent input routed into the plugin's sidechain bus. Use it to ring-modulate one track by another, for example a vocal shaped by a drum loop or synth pad. This requires a host that supports sidechain routing; if nothing is routed to the sidechain, the input passes through dry. Car Freq and Mod Freq do not apply in this mode.