Spool Programmer vs Filamuze

Transform your 3D printing workflow with Spool Programmer, the essential tool for programming RFID tags on your filament spools. Whether you're using Anycubic printers or building your own filament management system, this app makes tag programming simple, fast, and reliable. POWERFUL FEATURES • Write complete filament data to NTAG215/216 tags in seconds • 18 pre-configured profiles covering all major filament types • Read existing tags to verify or clone configurations • Check tag status and memory layout • Format tags for fresh programming • Custom color selection with RGB sliders and 16 presets • Support for 500g, 1kg, and 2kg spool sizes • Configurable print temperatures (nozzle, bed, chamber) FILAMENT TYPES SUPPORTED PLA, PLA+, PLA Matte, PLA Silk, PETG, ABS, TPU, Nylon, ASA, PC, PVA, HIPS, and BVOH. Each profile includes optimized default temperatures that you can customize. INTUITIVE INTERFACE Beautiful card-based design that guides you through every step. Select your filament type, choose a color, adjust temperatures, and write—all in a clean, modern interface that follows Apple's design guidelines. SMART & SAFE • Automatic detection of write-protected tags • Clear error messages with helpful guidance • Validates tag compatibility before writing • Preview data before committing to tag • No account required, no tracking, no ads PERFECT FOR • Makers managing multiple filament spools • 3D printing enthusiasts with Anycubic printers • Anyone building custom filament management systems • Hackerspaces and makerspaces • Professional print farms TECHNICAL DETAILS Supports standard NTAG215 and NTAG216 NFC tags with 144-byte user memory. Uses the same data format as the ACE-RFID project, ensuring compatibility with existing ecosystems. All processing happens on-device—your data never leaves your iPhone. REQUIREMENTS iPhone 7 or later with NFC capability running iOS 16.0 or later. You'll need blank NTAG215 or NTAG216 tags (widely available online). Note: Pre-programmed manufacturer tags may be write-protected. FREE & OPEN Based on the community-driven ACE-RFID project. No subscriptions, no in-app purchases, no data collection. Built by makers, for makers. Start programming your filament tags today and take control of your 3D printing workflow!

Your Bambu AMS only sees branded spools. Filamuze sees everything else. Sunlu, eSun, Polymaker, that AliExpress roll you picked up last month — they have no RFID tag. Your AMS has no idea they exist. Filamuze is where you track them: weight remaining, drybox status, print temps, reorder history, all in one place. You're not replacing your AMS. You're filling the gap it leaves. What Filamuze does • Inventory at a glance — see every spool on your shelf, weight remaining, and a red "running low" badge under 100 g. Sorted by material, color, or last used. • Log usage after each print — weigh the spool, enter the new weight. Or just enter how many grams you consumed (grab it from the slicer). Filamuze converts to meters automatically. • Reusable spools + refill catalog — 60+ brand empty-spool weights built in (Bambu, Prusament, Polymaker, Sunlu, eSun, and more). Register your reusable spools, link refills to them. The app does the empty-weight math so your remaining filament is always accurate. • Drybox tracking — mark any spool as dried, log the temp and hours, see days since last dry per spool. No more guessing. • NFC + QR pairing — stick an NFC tag on a spool, tap your phone, jump straight to that spool's detail. QR works too. • AI label scan — photograph the label, Filamuze fills in the form for you. • Filament database — 250+ products from 53 brands with preset temperatures. Pick from the list and stop typing brands manually. • 21 material reference cards — PLA, PETG, ABS, ASA, TPU, PC, Nylon, and all the composites (PLA-CF, PETG-CF, PA-CF, ASA-CF, and more). Best-for, watch-out, nozzle and bed temps, difficulty level. • Project cost accounting — filament + electricity + printer amortisation + platform fee. Know your real cost per print before pricing it on Etsy. • Edit anything inline — tap any field on a spool's detail screen to edit it. No separate edit mode. • Restock tracking — add a new purchase of the same product and Filamuze links them as a stack. Full purchase history per product. • Basic / Advanced view — beginners see the essentials. Advanced users toggle on to reveal temps, densities, and everything else. • Spoolman import — already using Spoolman? Import your existing data with one file pick. Works with any printer, any brand Bambu, Prusa, Creality, Anycubic, Ender, Voron — Filamuze doesn't care. It works with every spool regardless of whether there's an RFID tag on it. Free up to 20 spools No subscription required to get started. Most hobbyists never hit the limit. 5 languages: English, Russian, Hebrew (RTL), German, French Full RTL support for Hebrew. All strings localized — not just the UI chrome. Dark-only design. No ads. No tracking. Made by Qaizo Studio — a one-person indie shop that actually prints things.