MIDI vs Recording Mate

MIDIProbe is a pocket MIDI utility for iPhone and iPad that helps you discover, test, and troubleshoot MIDI devices (e.g., controllers, synths, mixers). Pick which endpoints to send to or listen to, fire off the exact MIDI commands you need, and watch a live, timestamped log to verify every message. • Discover USB, Bluetooth, and RTP network MIDI devices, and see detailed info like IDs, serial numbers, and transport type before selecting send/receive targets. - Send MIDI fast with interactive cards: - Notes, Control Change (CC), Program Change, Aftertouch, Pitch Bend; - System Common (Song Position Pointer, Song Select, Tune Request); - Real-Time (Start/Stop/Continue, Clock, Active Sensing, Reset); • Monitor inbound MIDI with a live log or grouped-by-command view, with filters for command types, clear controls, and timestamps. Typical use cases: • Reverse-engineer mixer control quickly:  You have an X32 mixer and want to use a floorboard to mute/unmute channels. Connect both to MIDIProbe, discover the right endpoints, and watch which channel/CC/value combinations actually toggle mutes—then verify your floorboard sends the exact same messages before you risk it live. • Map a foot controller to a multi-FX unit:  You want to configure a floorboard to switch presets/settings on your multi-effects processor. Use MIDIProbe to identify which Program Changes or CCs trigger the functions you need, then confirm the outgoing messages match your intended mapping. • Confirm keyboard controller channel routing:  Check whether your keyboard is transmitting on the correct MIDI channel (or accidentally sending Omni), and verify splits/layers are hitting the channels your synth or app expects. • Validate DAW controller templates:  Debug pad controller mappings for Ableton/Logic/Cubase—see exactly which notes/CCs each pad/knob/fader is sending, catch duplicated CC numbers, and confirm bank switching. • Troubleshoot “why doesn’t it respond?” fast:  If your synth/module isn’t reacting, use MIDIProbe to confirm whether it’s receiving anything at all, whether the messages are on the wrong channel, or whether you’re sending the wrong command type. • Verify pitch bend and high-resolution CCs:  Check pitch bend ranges and whether devices send 14-bit (MSB/LSB) pairs correctly for smooth parameter changes. • Build and test custom hardware/software:  If you’re developing MIDI controller firmware or a MIDI iOS/macOS app, use MIDIProbe as your “known good” sender/receiver to test parsing, edge cases, and message timing. If you’re into this kind of thing, MIDIProbe is for you.

An SV2 MIDI device is required. Recording Mate is a simple MIDI recording app that lets you connect an SV2 MIDI device, record your performance, and play it back easily. You can record up to 4 tracks, making it easy to separate different instruments or performance parts. Recorded tracks can be played back instantly, and you can mute specific tracks when you want to listen to only selected parts. Your MIDI performance can be saved as a MIDI file and shared with other apps or devices. Key Features: SV2 MIDI device connection support Record up to 4 MIDI tracks Track playback and mute control Delete and re-record tracks Save and share MIDI files