Comparison

Clean Wave vs Speaker Cleaner Water Eject +

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Clean Wave

Restore your phone's speaker clarity using sound waves and vibration. This app safely removes water, dust, and grime that muffle audio, bringing back crisp, full sound without any tools.

Highlights
  • Sound wave cleaning at multiple frequencies
  • Deep low-frequency bass mode for water
  • High-frequency tone for dust removal
  • Vibration mode for loose particles
  • Combined sound and vibration cleaning
  • Speaker test functionality
  • Built-in decibel meter
Features
Read full description

Clean your phone speakers with sound, no tools needed. Water, dust, and grime get trapped in your speaker grille and muffle every call, song, and alarm. CleanWave sends precision sound waves and gentle vibration through the speaker to push moisture and debris out from the inside. No cotton buds, no toothpicks, no repair shop. One tap to start. No menus to dig through. Just smart frequency presets that target water and dust so your audio comes back clear, full, and loud. Restore crystal clear audio +++ +++ +++ +++ +++ +++ Muffled speaker sound after rain, a swim, a workout, or a spill can ruin everything you listen to. CleanWave restores your sound fast by vibrating the speaker until trapped water beads up and slides out. Whether your speaker sounds quiet, crackly, or muffled, CleanWave gets it clear again in seconds. Key features +++ +++ +++ +++ +++ +++ • CleanWave includes everything you need for a fast, effective clean: • Sound wave cleaning at 165 Hz, 300 Hz, and 500 Hz • Deep low-frequency bass mode tuned for water ejection • High-frequency tone mode for fine dust removal • Vibration mode to shake loose trapped moisture and particles • Combined sound and vibration for maximum cleaning power • Speaker test for the top and bottom speakers • Built-in decibel meter to measure sound level and noise in real time • Volume to max in one tap before you clean • Adjustable cleaning duration and clean reminders • Cleaning history, tips, and best practice guidance • Works fully offline, anywhere, anytime Why CleanWave? +++ +++ +++ +++ +++ +++ Most people poke a muffled speaker with a cotton bud or just give up. CleanWave cleans your speaker with the science of sound: safe, fast, and done in under a minute. No hardware. No risk. Just crisp, clear audio with a single tap. When to use CleanWave +++ +++ +++ +++ +++ +++ • After your phone gets wet or caught in the rain • When speaker sound turns muffled, crackly, or distorted • After workouts when sweat reaches the speaker grille • Weekly maintenance to stop dust building up • Before an important call, meeting, or presentation Simple by design +++ +++ +++ +++ +++ +++ CleanWave is built clean and minimal so you can focus on the fix. Tap start, hold your phone speaker-side down, and let the sound waves do the work. One cycle is often all it takes. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

About

Speaker Cleaner Water Eject +

Features
Read full description

Speaker Cleaner Water Eject+ Help keep your iPhone speakers sounding their best. Speaker Cleaner Water Eject+ is an all-in-one speaker maintenance and audio utility designed to help reduce trapped moisture in compatible device speakers, test speaker performance and measure surrounding sound levels. Whether your device has been exposed to water or you simply want to check its audio performance, the app provides easy-to-use speaker cleaning and diagnostic tools. Speaker Cleaning Generate specially designed sound frequencies that may assist in reducing moisture inside compatible device speakers after exposure to water, rain or everyday moisture. Water Eject Play optimized sound waves designed to help move trapped water from speaker openings. Cleaning effectiveness may vary depending on the device model, amount of moisture, speaker condition and environmental factors. Tone Generator Generate adjustable sound frequencies using the built-in tone generator. Change frequency values to experiment with different sound waves for speaker cleaning and testing. Stereo Speaker Test Test your top speaker, bottom speaker or both speakers individually. Identify speaker imbalance, verify audio output and check overall speaker performance. Decibel Meter Measure surrounding sound levels using your device's microphone. Measurements are approximate and intended for general informational purposes only. Features • Water Eject • Speaker Cleaning • Tone Generator • Adjustable Frequency Generator • Stereo Speaker Test • Top Speaker Test • Bottom Speaker Test • Dual Speaker Test • Decibel Meter • Noise Level Meter • Sound Level Measurement • Audio Testing • Easy-to-Use Interface • Fast Cleaning Sessions Compatibility Designed for compatible iPhone models. Available features, measurements and cleaning effectiveness may vary depending on device model, hardware condition, speaker condition, microphone capabilities, iOS version and operating environment. The App is intended solely as a maintenance and diagnostic utility. It does not repair damaged speakers, restore hardware functionality or replace professional servicing. Disclaimer Speaker Cleaner Water Eject+ is an independent third-party utility application. The App generates specially designed sound frequencies that may assist with speaker cleaning and moisture reduction and includes speaker testing, tone generation and sound measurement tools. The App does not physically remove water, repair hardware, restore damaged speakers or guarantee any specific result. Cleaning effectiveness depends on factors including moisture level, speaker condition, device model, hardware condition and environmental conditions. Decibel measurements are approximate and should not be used where certified, calibrated or legally recognized sound measurements are required. The App is not affiliated with, sponsored by, endorsed by or associated with Apple Inc. or any smartphone manufacturer. All trademarks, logos and product names belong to their respective owners and are used solely for identification and compatibility purposes. Subscription Information Speaker Cleaner Water Eject+ offers optional auto-renewable subscriptions that provide unlimited access to premium features. • Payment will be charged to your Apple ID account upon confirmation of purchase. • Subscriptions automatically renew unless auto-renew is disabled at least 24 hours before the end of the current billing period. • Your account will be charged for renewal within 24 hours before the end of the current period. • You can manage subscriptions and disable auto-renewal at any time in Apple ID Account Settings. • Any unused portion of a free trial, if offered, will be forfeited upon purchase where applicable. Privacy Policy: https://mbrpro.org/legal/speaker-cleaner-water-eject Terms of Use: https://mbrpro.org/legal/speaker-cleaner-water-eject End User License Agreement (EULA): https://mbrpro.org/legal/speaker-cleaner-water-eject

Screenshots

Clean Wave4 screens
Speaker Cleaner Water Eject +4 screens

Verdict

The call

The clearest difference is device support: Clean Wave at 3 against Speaker Cleaner Water Eject +'s 1. Clean Wave also leads on iOS requirement (15.1 vs 17.0). On price, ads and in-app purchases there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Clean Wave sells 4 in-app purchases, starting at $2.99 per 7 days and Speaker Cleaner Water Eject + sells 4 in-app purchases, starting at $0.99 per 7 days. Whichever you choose, the download price is not the number that matters.

Scorecard2 real differences · 7 level
Clean Wave versus Speaker Cleaner Water Eject +: the parameters behind the verdict, then further details
ParameterClean WaveSpeaker Cleaner Water Eject +
PriceFreeFree
Rating5.0 (1 ratings) — better—
Number of ratings1 — better—
Update frequencyEvery 3 weeks—
AdsNoNo
In-app purchasesYesYes
MonetizationFreemium—
DevicesiPhone, iPad, iPod — betteriPhone
Requires iOS15.1 — better17.0
Further details — not scored
Size76 MB16 MB
Age rating4+4+
DeveloperappsixInternet Security Tools

In-app purchases

4 purchases

Clean Wave

Subscriptions2
  • CleanWave Max & dB Meter (Monthly)3 Days trial$2.997 Days
  • Decibel Sound Meter (Monthly)3 Days trial$3.991 Month
One-time2
  • CleanWave Max: Lifetime$12.99
  • CleanWave Max: Lifetime$19.99
4 purchases

Speaker Cleaner Water Eject +

Subscriptions4
  • All Premium3 Days trial$0.997 Days
  • Special Offer All Premium$1.991 Month
  • All Premium3 Days trial$2.991 Month
Show 1 more
  • All Premium3 Days trial$19.991 Year

Questions

Is Clean Wave free?
Clean Wave is free to download, with in-app purchases available.
Is Speaker Cleaner Water Eject + free?
Speaker Cleaner Water Eject + is free to download, with in-app purchases available.
Do Clean Wave or Speaker Cleaner Water Eject + have ads?
Neither Clean Wave nor Speaker Cleaner Water Eject + shows ads.

Other comparisons