Stud Finder Plus vs Stud Finder

# Stud Finder App Description **Find likely mounting zones with confidence, not guesswork.** Stud Finder uses your iPhone's built-in magnetometer to measure magnetic field changes that may indicate magnetic metal behind drywall. It provides live signal estimates to help you identify possible wall mounting areas. No extra hardware required. Open the app, calibrate on a low-signal area, then scan slowly along the wall while monitoring real-time feedback. Built for everyday DIY tasks like mounting TVs, shelves, mirrors, and frames. Performance varies based on wall material, phone model, phone case, and nearby interference. ## Features - Real-time 270-degree magnetic signal gauge with color-based intensity - Clear **METAL SIGNAL** indicator at higher signal levels - Adjustable sensitivity for different wall conditions - Manual calibration for a more stable baseline - Audio tone feedback that changes with signal intensity - Haptic feedback that scales with signal strength - 30-second signal history graph to help verify peaks - Built-in onboarding and practical scanning tips - Offline use, with no additional hardware ## Common Use Cases - Locate likely anchor points before mounting a TV bracket - Plan shelf or cabinet placement - Hang mirrors, art, and picture frames - Check spacing patterns during layout planning - Re-scan and confirm areas during installation ## How It Works Stud Finder measures changes in magnetic fields and highlights likely signal peaks behind the wall surface. It detects magnetic metal signals only. It does **not** detect wood studs directly and does not guarantee stud location. ## Important Safety Notice Stud Finder is **not** a safety device. It cannot detect electrical wiring, plumbing, or gas lines and must not be used for safety-critical decisions. Always verify with additional tools and methods before drilling, cutting, or mounting.

Find studs behind drywall using your iPhone's built-in magnetometer. This app detects metal fasteners (the screws and nails holding your drywall to wood studs) and helps you locate stud lines behind your wall. HOW IT WORKS Your drywall is screwed into wooden studs roughly every 16 inches. This app picks up those screws by reading changes in the magnetic field as you sweep your phone across the wall. Find screws in a vertical line and you've found the stud. HOW TO USE Take your case off. Hold your phone flat against the wall. Sweep slowly left and right. When the signal spikes, there's metal nearby. Mark each spike, look for a vertical line of hits, and that's your stud. Drill a small pilot hole before you mount anything heavy. If the bit hits something solid, you're on the stud. If it punches right through, move an inch and try again. Takes 30 seconds. WHAT THIS APP CANNOT DO It detects metal, not wood. If there are no screws or nails in the wall where you're scanning, it won't find anything. It also won't work well through thick plaster, concrete, or tile. And it's not a replacement for a professional stud finder on structural work. For mounting a TV, hanging shelves, or putting up pictures on normal drywall, it works. No ads. No nag timers. No interruptions. PRIVACY No account. No tracking. No data leaves your phone.