HomeMapper vs PrintFinder

Your entire smart home network. One view. HomeMapper builds a unified inventory of every device on your network, scanning HomeKit, Home Assistant, Thread, Matter, and IP at once and correlating them by hardware identifiers. DISCOVER Every method runs at once: • Apple's ecosystem. HomeKit via Apple's framework, plus Thread accessories, Border Routers, and Matter. • The network itself. Bonjour, subnet scans, and protocols like SSDP/UPnP. Printers, NAS boxes, and other local-only devices show up too. • Home Assistant. Direct read of your device registry: Matter, Thread, Zigbee, Z-Wave, ESPHome, and MQTT. When a device appears through several methods, HomeMapper merges it by seven hardware identifiers, not names. If HomeMapper isn't sure two entries are the same device, it lists both. YOUR DEVICES, EVERY DETAIL See devices Apple's Home app can't, and details it doesn't show: manufacturer, model, firmware, serial number, battery, IP and MAC address, and how each device connects, in columns like Connected via, Signal, Channel, and Stability. A room-based view groups them by room. TOPOLOGY MAP The Topology map shows how your devices connect: your Thread mesh, from the border routers down to the end devices they carry, your Zigbee network from Home Assistant, and each HomeKit bridge with the accessories behind it. It draws only connections it can measure. Tap a device for its full detail, or tap a connection to see its signal strength and how stable it has been. A red triangle marks a connection that is not working: weak, dropping traffic, or gone quiet. When a device will not report how it connects, HomeMapper shows that rather than guessing. A Health view lists what needs attention on your mesh, worst first: what is wrong, which devices, and one thing to try. Most homes show "Everything looks healthy." Export the map as a PNG, PDF, or SVG, titled with the home and dated. HOME ASSISTANT HomeMapper scans your Home Assistant servers as deeply as HomeKit, including the Thread mesh behind their border routers. Zigbee, Z-Wave, ESPHome, MQTT: devices HomeKit can't see appear alongside the ones it can. Pick a Primary Platform, and its room names win when a device is known to both. PLACES Scan more than one location, like your home and a relative's. Each Place holds its own Apple Homes and Home Assistant servers, and the app shows one Place at a time. HomeMapper picks the Place from devices on its local network, not your location. SETUP CODE VAULT Every HomeKit, Matter, and Z-Wave device has a setup code on a sticker that fades or gets lost. You need it to pair the device, and again if you reset or move it. No scan can recover one: setup codes never travel over the network. Save each code while you still have it: scan the QR with the camera, pull it from a photo, or type it in. It reads printed 8-digit codes too, for older accessories without a QR. A room-by-room list shows which devices are still missing one. Have a lot? Export a CSV worksheet, fill it in on a computer, and import it back. Your codes are stored on your device, in your backups, and synced through your own iCloud. EXPORT AND BACK UP Export your inventory to CSV, filtered how you want, for Numbers, Excel, or Sheets. Back up your inventory, settings, and setup codes to iCloud Drive or a local folder, and restore on another device. PRIVACY No ads and no tracking. Nothing leaves your device unless you send it. No account, and the only login is your own Home Assistant. FREE AND PRO HomeKit scanning, the device list, the room-based view, and switching between Apple Homes are free forever, with no scan or time limits. Pro adds multi-protocol scanning, all 20+ columns, Places, Home Assistant, the Topology map, the setup code vault, backup and restore, and CSV export. Subscribe yearly with a 7-day free trial, or buy Lifetime once and it never expires. Runs on iPhone, iPad, and Mac. Terms of Use: https://homemapper.app/terms/

You watch a 3D printing video, you want the file, and there's no link anywhere. Share the post to PrintFinder and we find the actual model by reading the caption and the video frames, then searching MakerWorld, Printables, and Cults3D for a match. A notification arrives when it's found. HOW IT WORKS • Tap Share in TikTok or Instagram, then choose PrintFinder • We analyze the caption and the video frames to identify the object • We search the public model repositories for a match • You get a link to the original file, with a confidence rating The search runs on our servers, so you can close the app straight away. BUILD YOUR PRINT LIBRARY • Save any find, and sort your prints into collections • Browse what's trending across the repositories • Get recommendations based on what you've saved • Set your printer for tailored compatibility hints • Compare notes with other makers in the comments • Share a find with a friend in a tap CREATORS COME FIRST PrintFinder never hosts, copies, or re-uploads model files. Every result links to the creator's own page, under their own license. FREE AND PLUS Browsing, searching, and saving are always unlimited. Free includes 5 imports every month, and PrintFinder Plus raises that to 100. Invite friends and earn up to 15 bonus imports a month, every friend who joins with your code counts. Plus is a subscription billed through your App Store account. It auto-renews until canceled; manage or cancel anytime in Settings. Terms of Use: https://printfinder.pages.dev/terms Privacy Policy: https://printfinder.pages.dev/privacy A note on accuracy: identification is automated and won't be right every time, especially for models sold outside the public repositories. Always check a file on its source page before you print.