Color Temperature Meter+ vs ColourTemp

Color Temperature Meter+ measures the colour temperature of the light around you in Kelvin, with tint, mired and the camera white balance to match, straight from your iPhone's camera. ▶ HOW IT MEASURES On iPhone the app reads the camera's own estimate of the light falling on the scene, the same estimate iOS uses to set white balance. Point the camera at a plain white or grey surface lit by the light you want to measure, not at the lamp itself. The reading settles within seconds and shows a ± range, so you can see how steady it is. When that estimate is not available, the app samples the centre of the frame instead, and you can calibrate it once on white paper in daylight. ▶ WHAT YOU SEE • Kelvin with a ± range, updating live • Mired value for filter and gel maths • Light type: golden hour, tungsten, fluorescent, LED, daylight, cloudy, shade • Tint (green or magenta) and Duv • Spectrum bar from 1,000 K to 15,000 K • The nearest camera white-balance preset: tungsten, fluorescent, flash, daylight, cloudy or shade ▶ FREEZE AND SAVE Tap Freeze to hold the current reading. A result card shows the Kelvin, mired, light type and matching white-balance preset, with Save Reading and Measure Again right below it. Saved readings keep their date and time. The latest 50 are kept, you can delete any of them, and you can export the list as CSV. ▶ PHOTOGRAPHY WB ASSIST Pick a target of 3200 K, 4300 K, 5500 K or 6500 K. The app shows the mired shift from the measured light to that target, the Kelvin to dial into your camera's custom white balance, and the CTO or CTB gel strength that closes the gap, from 1/8 upwards. ▶ REFERENCE CHART Thirteen common light sources, from candle flame (1,900 K) to clear blue sky (10,000 K), to compare with what you measured. ▶ HONEST LIMITS A phone camera is not a spectrometer. The app reports correlated colour temperature and tint, which is what matters for matching white balance and choosing gels. It does not measure spectral power distribution, CRI or TLCI, and two lamps with the same colour temperature but different spectra read the same. Mixed lighting gives a blend of the sources. Use it to set up shoots, match bulbs and check rooms; use a dedicated colour meter for critical colour work. ▶ PRIVACY Camera images are analysed on your device and are never uploaded. Available in 30 languages.

ColourTemp is a colour temperature and flicker detection tool built for working videographers, DPs, cinematographers and gaffers. Point the camera at any light source for an instant Kelvin reading. Switch to flicker mode to detect mains-frequency flicker before it becomes a post problem. COLOUR TEMPERATURE Measure light from 2500K candlelight to 9900K open sky. White balance is locked to a fixed 5600K reference for consistent, repeatable readings across a shoot. Readings are close approximations — a fast, practical guide for the set, not a replacement for a calibrated colorimeter. FLICKER DETECTION Uses 240fps camera sampling and FFT analysis to detect 50Hz and 60Hz mains flicker and harmonics. Also flags PWM dimming on LED fixtures that conventional measurement misses. BANDING RISK CALCULATOR Set your project frame rate and shutter speed. ColourTemp calculates instantly whether your current combination will produce banding — and can snap to a safe setting automatically. FREEZE & COMPARE Pause a reading to lock a reference. Adjust frame rate and shutter speed while the measurement stays frozen — ideal for comparing multiple fixtures or matching practical lamps. CALIBRATION Point at a known 5600K reference and take a five-second calibrated reading. The app stores a custom offset for your device and shooting conditions, improving consistency across a whole production. Built by a working DP — because practical fixtures don't ask permission, and bad light costs money in post. No account. No data collected. Everything runs on your device. Available as an annual subscription or one-off lifetime purchase. Pricing and terms are shown at first launch. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/