PuriFi vs MeshSat
Price, ratings, monetisation and update history for both apps, side by side ā with what reviewers say about each.
PuriFi
Read full descriptionHide full description
PuriFi is the companion app for the PuriFi device ā a network appliance that protects every device on your network. PuriFi blocks ads, trackers, and unwanted content on every device in your home ā and everywhere you go. PuriFi's live animation shows your internet traffic flowing in real time. Watch as ads and trackers are intercepted and destroyed before they ever reach your devices ā it's your internet, visualized. Unlike browser-based ad blockers, PuriFi works at the network level. That means every device connected to your home network is protected ā phones, tablets, laptops, smart TVs, gaming consoles, and even smart home devices. No apps to install on each device. No settings to configure. Just plug in your PuriFi device and you're set. Set up your PuriFi device with the app, connect it to your home network, and every device is automatically protected. PuriFi blocks thousands of known tracking domains, so advertisers can't follow you around the internet. When you leave home, PuriFi's built-in VPN keeps you connected to your home network ā so you get the same clean internet wherever you are. Block adult content, gambling sites, social media, and more. Enable SafeSearch across various platforms with one tap. Choose from preset protection levels or customize your own ā from light ad blocking to full lockdown mode. See exactly how many ads and trackers are being blocked, monitor your network health, and adjust your protection level ā all from the app. PuriFi requires the PuriFi hardware device. Available at purifi.io. Does not block sponsored content.
MeshSat
Read full descriptionHide full description
MeshSat turns an iPhone into a MeshSat gateway. Pair it with a MeshSat node, a pocket-sized box with a Meshtastic LoRa radio and a RockBLOCK 9603 Iridium modem, and one phone can send and receive over the mesh and by satellite. It keeps working when the mobile network and the internet are gone. It also works with any plain Meshtastic radio, for the mesh only. The node is open hardware anyone can build (https://github.com/meshsat/meshsat-fieldkit); its firmware and this app are open source (https://github.com/meshsat/meshsat-ios). Status: pre-release. This is a prototype under active development. It has never been deployed to a real user and has never been used in an actual emergency. Do not rely on it for your safety. What it does: ⢠Mesh: Meshtastic over Bluetooth LE: text, positions, telemetry, waypoints, node info and traceroute. ⢠Satellite: Iridium SBD through the node's RockBLOCK 9603, up to 340 bytes out and 270 bytes in. Messages wait in a queue and are retried until they go out. The app opens a satellite session only when there is something to send, when the modem rings or when you check the mailbox, never on a timer, because every session costs a credit. Passes are predicted on the phone, with no internet needed. ⢠Text messages: MeshSat opens the Messages composer with the text ready, compressed and optionally encrypted for a MeshSat kit; iOS lets no app send or read texts by itself. ⢠APRS through a KISS TNC over TCP (Direwolf, for example) or directly to APRS-IS. ⢠Hub, optional and open source: the phone reports to a MeshSat Hub and takes remote commands. ⢠TAK: the Hub's TAK positions on the map; the phone's own position and an SOS go to the Hub as Cursor on Target. ⢠Reticulum and LXMF: the phone is a Reticulum node with an LXMF address, as Sideband and MeshChat speak it, with voice notes and photos in a chat; over TCP, a Sideband on the same WiFi, the node's RockBLOCK 9704 by satellite, or an RNode radio over Bluetooth. ⢠Safety: hold the SOS button for 3 seconds and the SOS goes out on every route the phone has, each retried until it is sent, until you cancel it. A check-in timer and zones drawn on the map. ⢠Optional: keep the gateway running in the background, reporting your position and relaying while the app is off screen. ⢠The map works offline down to country level. Night mode turns the whole app red. Satellite messaging needs a RockBLOCK modem and Iridium credits from a provider; Iridium is a paid commercial network. Internet connections: the bundled world map covers country level; closer in, map tiles come from OpenStreetMap's tile servers while you look at the map online. Once the MeshSat node's satellite modem has been seen, Iridium orbit data is downloaded from celestrak.org, or tle.ivanstanojevic.me if that fails, when the stored copy is more than a day old, checked at most every 12 hours; before that only when you tap Update on the passes screen. The Hub, APRS-IS, Reticulum over TCP and its listener for peers on your WiFi connect only when you set them up, and a field kit you add under Setup is reached at the address you give it, or through the Hub relay. Node firmware is downloaded from MeshSat's releases on github.com only when you tap Check for update. Feedback from Setup > Help > Support leaves through your own mail app, only when you send it. Nothing else goes online. Permissions: Bluetooth, for the node and an RNode; location, for the map, passes, zones and SOS, and Always only for the background gateway; the camera, for QR codes; notifications, for incoming messages, warnings and an SOS; the microphone and speech recognition, only while you hold the button to record a voice note; a photo you pick, only to send it. A welcome page says what each is for before iOS asks. Privacy: the app has no analytics and no account, and sends nothing to MeshSat. https://meshsat.net/privacy/ Documentation, and a table of what has and has not been verified: https://docs.meshsat.net/ios/
Screenshots
Verdict
The clearest difference is update cadence: MeshSat at every 2 days against PuriFi's weekly. PuriFi's advantage is device support (3 vs 1) and iOS requirement (15.1 vs 17.0). On price, ads and in-app purchases there is nothing between them.
Scored on Price Ā· Rating Ā· Positive reviews Ā· Number of ratings Ā· Update frequency Ā· Ads Ā· In-app purchases Ā· Monetization Ā· Best chart rank Ā· Devices Ā· Requires iOS
Both are free to download. Neither carries in-app purchases, so what you see is what you pay.
PuriFi ships an update weekly, MeshSat every 2 days. The most recent releases landed on November 17, 2026 and November 13, 2026 respectively.
| Parameter | PuriFi | MeshSat |
|---|---|---|
| Price | Free | Free |
| Update frequency | Weekly | Every 2 days ā better |
| Ads | No | No |
| In-app purchases | No | No |
| Devices | iPhone, iPad, iPod ā better | iPhone |
| Requires iOS | 15.1 ā better | 17.0 |
| Further details ā not scored | ||
| Size | 50 MB | 78 MB |
| Age rating | 4+ | 4+ |
| Developer | Adam Karolyi | Kyriakos Papadopoulos |
In-app purchases
PuriFi
No in-app purchases
MeshSat
No in-app purchases





