ShutterFinder vs Flicker Safe

Stop guessing your shutter speed on set. Point your iPhone at a flickering light, tap Measure, and ShutterFinder tells you the exact shutter speed that makes the flicker disappear in your footage. HOW IT WORKS ShutterFinder films the light at 240 frames per second, finds the flicker frequency with spectral analysis and turns it into a shutter speed for the frame rate you shoot at. It then checks the result at a second frame rate, which unmasks fast LED dimmers that would otherwise look like ordinary mains flicker. Within seconds you know what to set. WHAT IT MEASURES • LED panels and practicals, tube lights, HMIs, neon, monitors and TVs • LED dimmers (PWM) and OLED screens, including many that flicker too fast for the camera to see directly • 50 Hz and 60 Hz mains, anywhere in the world • Mixed lighting: when two lights flicker at different rates, the advice takes both into account and shows the alternative BUILT FOR THE SET • Shutter as time (1/50) or angle (180°), one tap to switch • 23.98, 24, 25, 29.97, 30, 50 and 60 fps, plus any custom frame rate • Change the frame rate after measuring and the advice updates instantly • When no flicker-free shutter exists at your frame rate, such as some tube lights at 60 fps, ShutterFinder says so and gives the setting that leaves the least flicker • Honest results: too dark, too shaky or no flicker at all is reported as exactly that, never as a guess • The circle marks exactly what is measured; tap anywhere to focus • Measuring stops by itself as soon as the reading is solid UNDER THE HOOD • 240 fps high-speed capture with automatic exposure bracketing for dark scenes • Verification at a second, and when needed a third, frame rate to resolve frequencies above what the camera sees directly • FFT analysis with Apple's Accelerate framework and sub-Hz precision • Mains frequencies locked to their exact values, so 100 Hz gives an exact 1/50 PRIVACY Everything is measured on your iPhone. No images or video are ever stored or sent. Anonymous usage statistics (no personal data, no tracking) help us improve the measurements. Requires iPhone XS or later with iOS 17 or later.

FlickerSafe is a camera-based LED flicker tester for filmmakers, photographers, streamers, and event crews. Point your iPhone at a light to see its flicker frequency, modulation, and camera risk before you shoot. Use FlickerSafe when scouting venues, setting up a home studio, comparing LED panels, checking dimmer levels, or preparing a shoot where lighting needs to stay camera-safe. Key features: - Estimate dominant flicker frequency from camera luminance samples - Measure modulation depth and camera risk - Check common shutter speeds such as 1/50, 1/60, 1/100, and 1/120 - Get safer shutter-speed suggestions for the detected light - Save fixture measurements and history for later reference - Export production reports with FlickerSafe Pro FlickerSafe is designed as a practical field tool, not a laboratory instrument. Results depend on device camera capabilities, ambient light, fixture brightness, and how steadily the phone is held during capture.