Level Tool vs TrueLevel

Level Tool turns your iPhone into a spirit level and angle finder. Hold it against an edge or lay it on a surface, and the reading shows the tilt to a tenth of a degree. When it is level, the background behind the reading turns green and the phone taps once. Hang a frame, put up a shelf, mount a TV or set a washer on its feet by eye, and you often end up drilling a second hole. Level Tool tells you which side to raise before you drill. TWO TOOLS - Bubble: hold the phone against the top of a frame, a shelf or a TV, upright or on its long edge. It reads the angle of any edge, so it also works as an angle finder and an inclinometer. - Surface: lay the phone face up on a table, a floor or an appliance. It reads side to side and end to end, and tells you which corner to raise. MADE TO READ FROM A LADDER - The angle fills the screen in large digits. - The background behind the reading turns green when it is level, with one tap from the phone and a soft tick you can switch off. - A line under the reading says which side to raise. - Hold freezes the reading, so you can lift the phone off a rafter and read it. CALIBRATE WITH THE CASE ON Calibrate each tool in two steps on any flat table, with the case on. Lay the phone flat for Surface, or stand it on its long edge for Bubble, then turn it around on the same spot. That allows for your case and the camera bump. FOR RVS AND CAMPERS Lay the phone on the floor of an RV or camper, and Surface shows which way it leans and which corner to raise. PRO: ROOF PITCH, SLOPE AND A TARGET ANGLE Pro adds two units to the reading: roof pitch in x/12 and slope in percent. To read a roof, lay the phone flat on a rafter with Surface, or stand it on its long edge along the rafter with Bubble. Pro also sets a target, such as 4/12 or 6/12 for a roof, 2% for drainage or 45°, and the phone taps when you hit it. Bubble, Surface, degrees, Hold and calibration all work without Pro. If you bought Pro in an earlier version, it carries over. Level Tool shows no ads and needs no account. The level works without an internet connection. It does not measure length or distance. Check the next frame you hang before you drill. Terms of Use: https://cmlapps.github.io/leveltool/terms.html Privacy Policy: https://cmlapps.github.io/leveltool/privacy.html

TrueLevel turns your iPhone into a bubble level, angle finder, protractor, and plumb tool for carpentry, installation, and DIY checks — all with a clean, easy-to-read interface. • BUBBLE LEVEL Place your iPhone on a surface to check whether it is level. The dual-axis bubble responds in real time with live degree readouts. • ANGLE FINDER & PROTRACTOR Use the full 360° protractor display to check an angle. Hold your device against a surface and read the displayed angle for cutting, framing, or slope checks. Lock & Hold keeps a reading visible while you move the phone. • PLUMB MODE Check vertical alignment with a dedicated plumb bob display. Ideal for door frames, posts, fences, and wall installations. • HAPTIC CONFIRMATION Feel a subtle tap when the readout reaches level, so you do not have to stare at the screen. • SAVE & REVIEW READINGS (Pro) Save a reading with a job label, edit it, and revisit your organized measurement history later. Saved records stay on your phone. • DEVICE CALIBRATION Zero TrueLevel against a reference surface with a simple two-step calibration. Results depend on device sensors, placement, case, and calibration. FREE MEASUREMENT TOOLS • Bubble level with real-time dual-axis display • Angle finder with full protractor readout • Plumb mode • Lock & Hold • Haptic confirmation • Device calibration and unit controls TRUELEVEL PRO — CHOOSE YOUR ACCESS • Weekly subscription: eligible new weekly subscribers can try Pro free for 3 days, then the subscription renews weekly at the localized App Store price until canceled • Yearly subscription: billed yearly at the localized App Store price, with no free trial • Lifetime access: a one-time purchase at the localized App Store price, with no trial or renewal Every Pro option unlocks the same saved-work workflow: labeled measurement history, editing, organization, and later reference. Existing lifetime purchasers keep their Pro access. BUILT FOR PROFESSIONALS & DIY TrueLevel is designed for carpenters, contractors, engineers, and anyone who wants a practical clinometer on their phone. No ads, no account, and no internet required for measurements. PRIVACY FIRST TrueLevel collects zero data. No analytics, no tracking, no account required. Your measurements stay on your device. Requires iOS 17.6 or later. Privacy Policy: https://ai-app-generator-sigma.vercel.app/truelevel/privacy.html Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/