Level Tool vs Sensor Multitool
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Level Tool
This app transforms your phone into a precise spirit level and angle finder. It helps you hang frames, install shelves, or mount TVs accurately by indicating tilt to a tenth of a degree. The interface turns green and provides haptic feedback when an object is perfectly level.
- Spirit level functionality
- Angle finder and inclinometer
- Surface and bubble level modes
- Large, readable digits
- Visual and haptic level indicators
- Calibration for case accuracy
- Target angle setting (Pro)
Read full descriptionHide full description
Level Tool turns your iPhone into a spirit level and angle finder. Hold it against an edge or lay it on a surface, and the reading shows the tilt to a tenth of a degree. When it is level, the background behind the reading turns green and the phone taps once. Hang a frame, put up a shelf, mount a TV or set a washer on its feet by eye, and you often end up drilling a second hole. Level Tool tells you which side to raise before you drill. TWO TOOLS - Bubble: hold the phone against the top of a frame, a shelf or a TV, upright or on its long edge. It reads the angle of any edge, so it also works as an angle finder and an inclinometer. - Surface: lay the phone face up on a table, a floor or an appliance. It reads side to side and end to end, and tells you which corner to raise. MADE TO READ FROM A LADDER - The angle fills the screen in large digits. - The background behind the reading turns green when it is level, with one tap from the phone and a soft tick you can switch off. - A line under the reading says which side to raise. - Hold freezes the reading, so you can lift the phone off a rafter and read it. CALIBRATE WITH THE CASE ON Calibrate each tool in two steps on any flat table, with the case on. Lay the phone flat for Surface, or stand it on its long edge for Bubble, then turn it around on the same spot. That allows for your case and the camera bump. FOR RVS AND CAMPERS Lay the phone on the floor of an RV or camper, and Surface shows which way it leans and which corner to raise. PRO: ROOF PITCH, SLOPE AND A TARGET ANGLE Pro adds two units to the reading: roof pitch in x/12 and slope in percent. To read a roof, lay the phone flat on a rafter with Surface, or stand it on its long edge along the rafter with Bubble. Pro also sets a target, such as 4/12 or 6/12 for a roof, 2% for drainage or 45°, and the phone taps when you hit it. Bubble, Surface, degrees, Hold and calibration all work without Pro. If you bought Pro in an earlier version, it carries over. Level Tool shows no ads and needs no account. The level works without an internet connection. It does not measure length or distance. Check the next frame you hang before you drill. Terms of Use: https://cmlapps.github.io/leveltool/terms.html Privacy Policy: https://cmlapps.github.io/leveltool/privacy.html
Sensor Multitool
Access real-time data from your device's built-in sensors, including accelerometer, gyroscope, magnetometer, altimeter, and compass. Choose from three sensitivity modes for raw, balanced, or smoothed data output. Ideal for makers, engineers, and hobbyists.
- Live sensor data dashboard
- Accelerometer, Gyroscope, Magnetometer, Altimeter, Compass
- Three sensitivity modes (Raw, Balanced, Smooth)
- On-device data processing
- Real-time motion, rotation, and magnetic field readings
- Altitude and pressure measurements
Read full descriptionHide full description
Raw Sensor Multitool gives you instant, real-time access to the raw data streaming from your iPhone's built-in sensors — all in one clean dashboard. Designed for DIY makers, engineers, hobbyists, and anyone who wants to know exactly what their phone is measuring. SENSORS INCLUDED • Accelerometer — Live X, Y, Z forces in g. See gravity, tilt, and motion as raw values. Perfect for understanding how your phone moves in space. • Gyroscope — Real-time rotation rates on all three axes in rad/s. Ideal for robotics, motion tracking, and calibration projects. • Magnetometer — Raw magnetic field strength in microteslas (µT) on X, Y, Z. Detect nearby magnets, map field distortions, or calibrate compass-based projects. • Altimeter — Relative altitude change in meters and absolute barometric pressure in hPa. Zero the baseline at any time with the Reset button. • Compass — Magnetic and true heading in degrees, with a live compass rose and accuracy indicator. Instantly see if your magnetometer needs calibration. THREE SENSITIVITY MODES Tap Raw, Balanced, or Smooth at the top of the dashboard to control how data is filtered: • Raw — No filtering. Full precision. Every sensor update displayed as-is. Best for debugging and precision DIY work. • Balanced — Light smoothing with reduced decimal places. Clean and readable. The default mode. • Smooth — Heavy moving-average filter. Dramatically reduces noise. Best for steady observation and general use. DESIGNED FOR DIY PROJECTS Whether you're building a sensor logger, calibrating a magnetometer array, testing a motion-sensitive prototype, or just curious about your phone's hardware — Raw Sensor Multitool puts the data front and center, with no clutter. All sensor data is processed entirely on-device. Nothing is stored, logged, or transmitted.
Screenshots
Verdict
The clearest difference is ads: Level Tool at none against Sensor Multitool's shown. Sensor Multitool's advantage is update cadence (every 3 weeks vs every 4 months). On price, rating, ratings volume and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Level Tool sells 2 in-app purchases, starting at $4.99 per 7 days and Sensor Multitool sells 3 one-off in-app purchases. Whichever you choose, the download price is not the number that matters.
On the App Store both sit at effectively the same score — 5.0 for Level Tool against 5.0 for Sensor Multitool. Both are backed by a comparable volume of ratings — 2 and 1 respectively.
Level Tool ships an update every 4 months, Sensor Multitool every 3 weeks. The most recent releases landed on November 13, 2026 and November 18, 2026 respectively.
| Parameter | Level Tool | Sensor Multitool |
|---|---|---|
| Price | Free | Free |
| Rating | 5.0 (2 ratings) | 5.0 (1 ratings) |
| Number of ratings | 2 — better | 1 |
| Update frequency | Every 4 months | Every 3 weeks — better |
| Ads | No — better | Yes |
| In-app purchases | Yes | Yes |
| Monetization | Free with in-app purchases | Free with in-app purchases |
| Devices | iPhone | iPhone, iPad — better |
| Requires iOS | 17.0 | 17.0 |
| Further details — not scored | ||
| Size | 10 MB | 5 MB |
| Age rating | 4+ | 4+ |
| Developer | Cloud Motion Lab LLC | Andrew Meyers |
Customer experience
Level Tool
Sensor Multitool
In-app purchases
Level Tool
- Level Tool Pro Weekly3 Days trial$4.997 Days
- Level Tool Pro$9.99
Sensor Multitool
- Small Donation$0.99
- Medium Donation$2.99
- Large Donation$4.99









