Comparison

CoatInspect Pro vs Dew Point

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

CoatInspect Pro

This app provides essential coating inspection calculations and reference guides for field professionals. It offers tools for dry film thickness, dew point, ambient conditions, and more, all accessible offline. Designed for certified inspectors working in environments with limited internet access.

Highlights
  • DFT/WFT Calculator
  • Dew Point Calculator
  • Ambient Condition Check
  • Spread Rate Calculator (Premium)
  • Surface Profile Calculator (Premium)
  • Abrasive Consumption Calculator (Premium)
  • Offline functionality
Features
Read full description

CoatInspect Pro turns your iPhone into a complete coating inspection toolkit — DFT/WFT, dew point, ambient conditions, spread rate, surface profile, and abrasive consumption — all 100% offline, built specifically for AMPP and NACE certified inspectors who work where internet doesn't. Designed for AMPP and NACE certified professionals who work on offshore platforms, bridges, ships, pipelines, and industrial facilities where internet access is unreliable. Every calculation runs on-device with zero connectivity required. COATING CALCULATORS: • DFT/WFT Calculator — Convert between dry film thickness and wet film thickness using volume solids percentage. Supports both WFT→DFT and DFT→WFT modes. Essential for every coating application. • Dew Point Calculator — Calculate dew point temperature from air temperature and relative humidity using the Magnus-Tetens approximation. Instantly verify the 3°C delta T compliance requirement before applying coatings. • Ambient Condition Check — GO/NO-GO assessment for coating application. Checks delta T compliance (≥3°C required) and humidity limits (max 85%). Get instant pass/fail results in the field. • Spread Rate Calculator (Premium) — Calculate theoretical and practical spread rates from volume solids, target DFT, and transfer efficiency. Get paint consumption in L/m² and cost estimates per square meter. • Surface Profile Calculator (Premium) — Enter multiple blast profile readings, set min/max specifications, and get instant compliance verification with average depth calculation. • Abrasive Consumption Calculator (Premium) — Estimate abrasive usage for blast cleaning. Supports 8 abrasive types: steel grit, steel shot, garnet, aluminum oxide, glass bead, copper slag, coal slag, and silicon carbide. Includes cost estimation. REFERENCE GUIDES: • Coating Standards — Complete reference for SSPC-SP 1 through SP-12, ISO 8501, and NACE equivalents. Know the correct surface preparation standard for every job. • Abrasive Guide — 8 abrasive types with profile ranges, consumption rates, and characteristics. Compare options quickly in the field. • Surface Preparation Methods — Solvent cleaning, hand tool cleaning, power tool cleaning, blast cleaning, and water jetting specifications. BUILT FOR THE FIELD: • Calculation History — Last 50 calculations saved automatically. Review and compare past results across jobs. • Favorites — Mark frequently used calculations for instant access. • Share Results — Generate formatted text summaries to share with project managers and clients. • Unit Toggle — Switch between Metric (°C, microns, m², L) and Imperial (°F, mils, ft², gal) with one tap. • Dark Mode — Full dark/light mode support for any environment. • 100% Offline — No internet required. Every calculation and reference runs entirely on-device. Use it on the rig, on the bridge, or in the yard. FREE vs PREMIUM: Free includes DFT/WFT calculator, dew point calculator, ambient condition check, all reference guides, calculation history, favorites, and sharing. Premium unlocks spread rate calculator, surface profile calculator, abrasive consumption calculator, and all future tools as they are added. Built for coating professionals by people who understand the industry. CoatInspect Pro uses ASTM, SSPC, NACE, and ISO standard formulas — not guesswork. From CIP Level 1 to senior coating consultant, this is the inspection tool that belongs in your pocket. Terms of Use (EULA): https://coatinspectpro.volvoxmobile.com/terms Privacy Policy: https://coatinspectpro.volvoxmobile.com/privacy

About

Dew Point

Features
Read full description

You already have the readings. This tells you what they mean. Type in what your own thermometer and hygrometer say — for this room, and for the air you are thinking of letting in. Nothing here is measured by the phone and nothing is fetched from a weather service. There is no network code in this app at all. Compare rooms by moisture, not percent. Relative humidity moves with temperature even when the water does not. Outside at 5 °C and 90 % holds about half the water of a room at 21 °C and 60 % — so opening the window in winter dries the room, and the percentages say the opposite. Both states sit on one axis in grams of water per kilogram of dry air, and the answer is a direction with a size, not a number to interpret. What the room becomes if you vent. Slide how much of the other air to let in and the mixed state moves between the two: its temperature, its humidity, its dew point. Water mass and heat are what carry over when two airs meet, so the mixed temperature is recovered from those rather than averaged. Nothing else in this category will show you the result of the mix. Every surface has its own margin. Water lands on the coldest thing in the room, not on the room. Name the window glass, the wall corner behind the wardrobe, the lens you are about to take outside, the pipe in the crawl space — each one takes its own temperature, and each one gets two margins: how many degrees before it condenses, and how many before it reaches the 80 % line where mould can grow. That second number is why "not condensing" is not the same as "fine". Both unit cultures. Celsius with grams per kilogram, or Fahrenheit with grains per pound. Air pressure is an input, because water mass runs inversely with it and a room at altitude is not a room at sea level. The arithmetic is in the app. Six anchors, from a dew point to an adiabatic mix. The formulas are named on the How it works screen — Magnus for saturation pressure, Stull for wet bulb, conservation of water and heat for mixing — together with six values checked against published figures, so you can hold the app against a psychrometric chart and see where it stands. Nothing leaves this device. No account, no server, no location. Languages: English, 한국어, 日本語, 繁體中文, Deutsch, Français, Español

Screenshots

CoatInspect Pro4 screens
Dew Point4 screens

Verdict

The call

The clearest difference is in-app purchases: Dew Point at none against CoatInspect Pro's 2. CoatInspect Pro's advantage is ads (none vs shown). On price, device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. CoatInspect Pro sells 2 in-app purchases, starting at $1.99 per 7 days. Dew Point asks for nothing beyond the download.

Scorecard2 real differences · 7 level
CoatInspect Pro versus Dew Point: the parameters behind the verdict, then further details
ParameterCoatInspect ProDew Point
PriceFreeFree
Rating4.0 (1 ratings) — better—
Number of ratings1 — better—
Update frequencyEvery 4 weeks—
AdsNo — betterYes
In-app purchasesYesNo — better
MonetizationFree with in-app purchases—
DevicesiPhoneiPhone, iPad — better
Requires iOS17.017.0
Further details — not scored
Size18 MB4 MB
Age rating4+4+
DeveloperErsel TarhanJinwan Kim

In-app purchases

2 purchases

CoatInspect Pro

Subscriptions2
  • Weekly Access$1.997 Days
  • Annual Premium1 Month trial$19.991 Year
None

Dew Point

No in-app purchases

Questions

Is CoatInspect Pro free?
CoatInspect Pro is free to download, with in-app purchases available.
Is Dew Point free?
Dew Point is free to download, with no in-app purchases.
Do CoatInspect Pro or Dew Point have ads?
Dew Point shows ads; CoatInspect Pro does not.

Other comparisons