TransitTrackingLogBook vs HVAC Load Calc
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
TransitTrackingLogBook
This professional ELD application automates Hours of Service recording for commercial drivers, ensuring FMCSA compliance. It offers features like real-time violation alerts, digital inspection reports, and document management, all accessible offline.
- Automated Hours of Service recording
- FMCSA-registered ELD compliance
- Digital Driver Vehicle Inspection Reports (DVIR)
- Document management with expiration alerts
- Offline functionality with automatic sync
- Real-time violation alerts
Read full descriptionHide full description
Transit Tracking LogBook is a professional Electronic Logging Device (ELD) application designed for commercial motor vehicle drivers. FMCSA-registered and fully compliant with the ELD mandate, it provides accurate, automated Hours of Service recording to keep you legal on the road. Hours of Service (HOS) Tracking - Automatic duty status recording: Driving, On-Duty, Sleeper Berth, Off-Duty - Support for US 60/7, 70/8, and Canadian cycle rules - Real-time violation alerts for Break, Driving, Shift, and Cycle limits - Personal Conveyance and Yard Move driver indications - Short-haul and adverse driving condition exceptions - Daily log certification with electronic signature ELD Compliance - FMCSA-registered ELD (Registration ID: TFCY) - Automatic engine data capture via Bluetooth ELD device - Tamper-resistant event recording with sequence validation - ELD output file generation for roadside inspections - Malfunction and diagnostic event detection - Unidentified driving segment management Driver Vehicle Inspection Reports (DVIR) - Pre-trip and post-trip inspection checklists - Photo capture for defect documentation - Digital signature for driver and mechanic sign-off - Defect tracking and resolution history Document Management - Store and organize driver, vehicle, and trailer documents - CDL, medical card, registration, and insurance tracking - Expiration alerts for compliance documents Fleet Communication - Real-time messaging with safety personnel and dispatc - Stay connected with your fleet from the cab Vehicle & Asset Management - Easy vehicle selection and trailer assignment - Support for multiple vehicles and trailers - Co-driver support with seamless driver switching Built for Drivers - Clean, intuitive interface designed for use on the road - Works offline with automatic sync when connected - Background location tracking for accurate drive-time recording - Bluetooth ELD auto-reconnect - Face ID / Touch ID secure login - Live Activity support for at-a-glance HOS status Download Transit Tracking LogBook today and drive with confidence knowing your Hours of Service are always accurate and compliant.
HVAC Load Calc
This app estimates a home's heating and cooling needs using a simplified block calculation. It helps analyze load sources and check equipment quotes against calculated requirements. Results can be saved, shared as reports, and synced across devices.
- Whole-house block load calculation
- Load source analysis
- Equipment and fuel use checks
- Job saving and syncing
- Shareable PDF reports
- Design temperature input
Read full descriptionHide full description
Estimate a home's heating and cooling loads with a simplified whole-house block calculation, see where the load comes from, and check the equipment you are quoting against it. Use the results as an initial estimate. If your project requires a certified room-by-room Manual J, you'll need a separate calculation. New subscribers start with a free trial. After it, HVAC Load Calc requires a subscription for all the features below. Enter the house details - Floor area, ceiling height, and stories - Use the site's ZIP code to find the nearest US weather station. You can also search by town, state name, or state code, or enter your own design temperatures. - Indoor design temperatures, 70 °F heating and 75 °F cooling unless you change them - Insulation presets for walls, ceiling, and floor, or your own U-values - Can't see the insulation? Fill in typical walls, ceiling, windows, and air leakage from the year the house was built. - Window area on each side, a glazing type or the U-factor and SHGC from the NFRC label, and how much of the east, south, and west glass is shaded - Air tightness as a preset or a blower door CFM50 result - Ducts in the attic, crawlspace, basement, or garage, with their insulation and sealing - Occupants See the results - Design heating load (BTU/h) - Design cooling load, split into sensible and latent loads (BTU/h) - Equivalent cooling tonnage, with a plausibility check for unusually high or low loads - The load by component: walls, ceiling, floor, doors, windows, sun, infiltration, people, and ducts Check before you quote - Equipment check: enter a unit's cooling capacity, heat pump capacities at 47, 17, and 5 °F, or furnace output. See the share of the load it covers, the ACCA Manual S range, the heat pump balance point, and the backup heat needed at design. - Fuel use check: enter last year's gas, oil, or propane use and compare the load it implies with the calculation. Save the job - Start a new job, save changes to the current job, or save an independent copy - Pick up an unfinished calculation after closing the app - See each job's loads and tonnage in the saved list without opening it - Saved jobs, your company details, and your logo sync through iCloud to your iPhone and iPad signed in to the same Apple Account. There's no separate sign-up. Share a report - Page one: the design loads, equivalent tonnage, and your equipment and fuel checks - Page two: the design conditions and where they came from, the load by component, and every input - Add the client's name, property address, notes, your company contacts, and your logo - Review the PDF before sharing it like any other file On iPad, the form and report sit side by side and update as you work. How the calculation works The calculation uses textbook ASHRAE heat transfer: envelope conduction, infiltration, solar and internal gains. ACCA Manual J block loads use the same basis. Duct losses follow the ASHRAE residential load factor method, and a blower door result is converted the way Manual J converts it. Design temperatures come from ASHRAE tables where available and from fifteen years of hourly NOAA records elsewhere. The estimate assumes a square footprint and 40 ft² of exterior doors. You can't change those assumptions. Cancel anytime in Settings. Engineering reference only. This is a whole-house block load, not a substitute for a certified room-by-room Manual J or professional engineering judgment. Terms: https://manualj.vovaluka.com/terms Privacy: https://manualj.vovaluka.com/privacy
Screenshots
Verdict
The clearest difference is in-app purchases: TransitTrackingLogBook at none against HVAC Load Calc's 1. HVAC Load Calc's advantage is update cadence (every 2 weeks vs monthly). On price, rating, ratings volume and ads there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. HVAC Load Calc sells 1 in-app purchase, starting at $39.99 per year. TransitTrackingLogBook asks for nothing beyond the download.
On the App Store both sit at effectively the same score — 5.0 for TransitTrackingLogBook against 5.0 for HVAC Load Calc. Both are backed by a comparable volume of ratings — 1 and 1 respectively.
TransitTrackingLogBook ships an update monthly, HVAC Load Calc every 2 weeks. The most recent releases landed on November 15, 2026 and November 19, 2026 respectively.
| Parameter | TransitTrackingLogBook | HVAC Load Calc |
|---|---|---|
| Price | Free | Free |
| Rating | 5.0 (1 ratings) | 5.0 (1 ratings) |
| Number of ratings | 1 | 1 |
| Update frequency | Monthly | Every 2 weeks — better |
| Ads | No | No |
| In-app purchases | No — better | Yes |
| Monetization | Free — better | Subscription |
| Devices | iPhone, iPad | iPhone, iPad |
| Requires iOS | 17.6 | 17.0 — better |
| Further details — not scored | ||
| Size | 49 MB | 13 MB |
| Age rating | 17+ | 4+ |
| Developer | Transit Tracking LLC | Vladimir Lukashov |
Customer experience
TransitTrackingLogBook
HVAC Load Calc
In-app purchases
TransitTrackingLogBook
No in-app purchases
HVAC Load Calc
- HVAC Load Pro7 Days trial$39.991 Year
Questions
Is TransitTrackingLogBook free?
Is HVAC Load Calc free?
Which has better reviews, TransitTrackingLogBook or HVAC Load Calc?
Do TransitTrackingLogBook or HVAC Load Calc have ads?
Which is updated more often, TransitTrackingLogBook or HVAC Load Calc?
Other comparisons















