光烁智能锂电 vs MultiVolt

【核心功能】 实时监控电池状态，掌握电压、电流、电量、温度等关键参数，让电池健康一目了然。 【主要功能】 • 蓝牙快速连接：一键配对电池设备，稳定传输数据 • 实时数据展示：电压、剩余容量、循环次数、温度等核心参数实时更新 • 历史记录查看：支持查看电池使用历史，分析性能趋势 • 异常提醒：电池状态异常时及时提醒，保障使用安全 【适用场景】 电动车电池管理、储能设备监控、户外电源查看、其他智能电池设备数据读取 【技术特点】 • 采用标准蓝牙协议，连接稳定低功耗 • 数据精准读取，实时同步无延迟 • 界面简洁直观，操作零门槛

MultiVolt shows what your camper batteries are doing — all of them at once. The app connects over Bluetooth directly to the battery management system and reads what it measures anyway: state of charge, voltage, current, power, every single cell voltage, temperature and the BMS protection flags. No account, no cloud, no internet. THE WHOLE BANK AT A GLANCE Several batteries add up to one balance — weighted by capacity, not simply averaged. A 200 Ah battery at 90 % and a 50 Ah one at 10 % make 74 % together, not 50 %. Runtime is calculated from the smoothed current: a cycling compressor fridge no longer makes the estimate jump between 40 hours and 2 hours. EVERY CELL ON ITS OWN Cell voltages as bars, the spread in millivolts, the active balancer. When a cell drifts away, you see it before the BMS shuts down. LIMITS YOU SET YOURSELF State of charge, cell voltage high and low, cell drift, temperature, charging in the cold, current. Per-battery limits where batteries differ — a 280 Ah battery takes currents a 100 Ah one does not. HONEST READINGS A value the BMS does not report shows as "--", never as zero. Zero is a statement; a missing value is not. When a protocol reports no protection status, it says so — instead of a reassuring green check mark. TRY IT WITHOUT A BATTERY Demo mode simulates three batteries with real LiFePO4 physics and stays free forever. You see the whole app before pairing anything. SUPPORTED SYSTEMS • Ective and identical Topband modules (also StartCraft, KiloVault, Wattstunde) • JBD / Xiaoxiang and equivalents • Daly Smart BMS (D2 series and relatives) FREE AND PRO One battery is free — with every reading, all limits, the history and all warnings. MultiVolt Pro monitors up to six batteries at once. IMPORTANT MultiVolt is a display and a log, not a safety device. No commands are sent over Bluetooth — the app only reads. Deep discharge protection, cut-off and overcurrent protection belong in the BMS and must work without a phone. SUBSCRIPTION AND TERMS MultiVolt Pro is a subscription with a monthly or yearly term. It renews automatically until it is cancelled; cancellation is done in the App Store account at least 24 hours before the current period ends. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://multivolt.dkcloud.at/privacy