Comparison

Crown Cut Guide vs StudPlan

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Crown Cut Guide

Calculate crown molding cuts with confidence. This app provides clear miter and bevel guidance for various corner types and cutting methods, simplifying installation work. It supports different saw types and custom spring angles for precise results.

Highlights
  • Miter and bevel guidance
  • Flat/compound and nested/upright cutting methods
  • Single-bevel and dual-bevel saw support
  • Custom spring-angle measurement
  • Vaulted/sloped ceiling guidance
  • Placement and direction instructions
Features
Read full description

Crown Cut Guide helps you calculate crown molding cuts with more confidence and less guesswork. Enter the wall angle, choose the corner type and piece side, set the spring angle, and get clear miter and bevel guidance for the cut ahead. The app is designed for real installation work, where corners are not always perfect and setup details matter. With support for flat/compound and nested/upright methods, single-bevel and dual-bevel saws, custom spring-angle measurement, and vaulted/sloped ceiling transitions, Crown Cut Guide keeps essential crown molding tools in one focused workflow. Key features: • Miter and bevel guidance for crown molding cuts • Flat/compound and nested/upright cutting methods • Single-bevel and dual-bevel saw support • Custom spring-angle measurement from a sample piece • Vaulted/sloped ceiling transition guidance • Clear placement, direction, and keep-side instructions Crown Cut Guide keeps the process simple, practical, and ready to use at the saw. Always verify field measurements and test on scrap before cutting finish material.

About

StudPlan

Features
Read full description

Plan wall framing in seconds — wood or steel, straight or rake/gable — with full material takeoffs, client quotes, and cut lists ready for the job site. Built for iOS 17. No accounts. No analytics. No advertising. No tracking SDKs. 100% offline — every calculation runs on your phone, so it works in a basement or anywhere else with no signal. WHAT YOU CAN DO • FRAME A SINGLE WALL Enter length, height, and on-center spacing (12", 16", 19.2", or 24"). Choose 2x4 or 2x6 lumber. Get instant stud counts, plate lengths, board feet, wood volume, and wall area, with a live layout and your choice of end-stud configuration. Tap any field to type over it instantly. • STEEL FRAMING Cold-formed steel studs for non-load-bearing partitions — track and stud linear-foot takeoffs, gauge selection, and self-drilling screw counts. • RAKE, GABLE & ASYMMETRIC GABLE WALLS Enter a pitch (3:12 to 12:12, or custom) or low/high heights. Gable walls support a center or off-centre ridge with independent left/right slopes. Every stud comes out with its exact length and bevel angle, ready to cut. • DOORS, WINDOWS & CORNERS Drop in any opening with its rough opening size, and position it from the left edge, right edge, or center — one tap. King studs, jack studs, cripples, sills, and headers are calculated for you, including built-up trimmer posts for wide openings per IRC R602.7.5. • CUT LIST & MATERIAL TAKEOFF A full board-by-board takeoff — studs, plates, headers, blocking — per wall and across the project. Sheathing and drywall sheet counts, insulation coverage, and fastener estimates included. A buy list shows how many sticks of each market length to order, exportable as CSV. • 4×8 SHEET LAYOUT See exactly where OSB or plywood panels land on your wall. Edges on a stud are green; unsupported joins are flagged red before you start nailing. • FIXTURE BACKING Point-placed blocking for grab bars, TV mounts, and cabinets, each with its own board footage and diagram placement. • PRESETS One tap loads standard pre-cut heights (92-5/8", 104-5/8", 116-5/8"). Or save your own wall configuration once and reuse or update it on any wall. • MARK-OUT GUIDE A copy-ready list of measured positions along the plate — for marking studs on-site without re-counting. • MULTI-WALL PROJECTS Save framing jobs across multiple walls with intersection tracking (shared studs auto-deducted at T-junctions). Duplicate a wall or start the next one pre-filled with the last. Undo an accidental delete. Track totals: studs, plates, board feet, wood volume, wall area, and cost. • CLIENT QUOTE PDF & EXPORT A client-ready estimate with labor hours, material subtotal, markup, and tax — without exposing your cut list. Or export a full PDF with diagrams, cut lists, mark-out positions, and material summary. • IMPERIAL AND METRIC Feet-inches-fractions down to 1/8", or millimeters. Switch anytime without losing your project. • YOUR OWN iCLOUD SYNC Projects sync across your iPhone and iPad through your own iCloud account — optional, can be turned off in Settings. Never touches our servers; there are none. • IRC REFERENCE BUILT IN IRC R602.7 header sizing, bearing and point loads, nominal vs. actual lumber sizes, steel gauge-to-mil, common rough opening sizes, corner stud configurations, and roof pitch to angle conversions. PRIVACY FIRST StudPlan runs on-device. No login. No analytics. No advertising. No tracking SDKs. No camera, photo library, location, or microphone access requested. Turn on iCloud sync and your projects sync only through your own iCloud account — never through our servers, because we don't have any. 3-day free trial, then $1.99/week. Monthly, yearly, and lifetime options available. Cancel anytime. Terms of Use: https://taxlite.net/stud_plan/terms.html Privacy Policy: https://taxlite.net/stud_plan/privacy.html

Screenshots

Crown Cut Guide4 screens
StudPlan4 screens

Verdict

The call

The clearest difference is ratings volume: Crown Cut Guide at 6 against StudPlan's 1. On price, rating, update cadence and ads there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Crown Cut Guide sells 1 one-off in-app purchase and StudPlan sells 4 in-app purchases, starting at $1.99 per 7 days. Whichever you choose, the download price is not the number that matters.

ReceptionRating · Positive reviews · Number of ratings

StudPlan holds the better App Store score, 5.0 against 4.8. That said, the two scores are not equally well evidenced: Crown Cut Guide has 6 ratings behind it against 1, so its average is the more settled of the two.

UpkeepUpdate frequency

Crown Cut Guide ships an update every 9 days, StudPlan every 3 weeks. The most recent releases landed on November 18, 2026 and November 19, 2026 respectively.

Scorecard1 real difference · 8 level
Crown Cut Guide versus StudPlan: the parameters behind the verdict, then further details
ParameterCrown Cut GuideStudPlan
PriceFreeFree
Rating4.8 (6 ratings)5.0 (1 ratings) — better
Number of ratings6 — better1
Update frequencyEvery 9 days — betterEvery 3 weeks
AdsNoNo
In-app purchasesYesYes
MonetizationFree—
DevicesiPhoneiPhone
Requires iOS18.017.0 — better
Further details — not scored
Size3 MB4 MB
Age rating4+4+
DeveloperAlona NesterenkoZHENGQIAO JIANG

Customer experience

Crown Cut Guide

All ratings6 ratings
Positive100.0%
Neutral0.0%
Negative0.0%

StudPlan

All ratings1 ratings
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

1 purchases

Crown Cut Guide

One-time1
  • Lifetime Access$3.99
4 purchases

StudPlan

Subscriptions3
  • Weekly3 Days trial$1.997 Days
  • Monthly$4.991 Month
  • Yearly3 Days trial$29.991 Year
One-time1
  • Lifetime$79.99

Questions

Is Crown Cut Guide free?
Crown Cut Guide is free to download, with in-app purchases available.
Is StudPlan free?
StudPlan is free to download, with in-app purchases available.
Which has better reviews, Crown Cut Guide or StudPlan?
StudPlan is rated higher. Crown Cut Guide averages 4.8 out of 5 from 6 ratings, while StudPlan averages 5.0 from 1 ratings.
Do Crown Cut Guide or StudPlan have ads?
Neither Crown Cut Guide nor StudPlan shows ads.
Which is updated more often, Crown Cut Guide or StudPlan?
Crown Cut Guide ships an update every 9 days, and StudPlan every 3 weeks. Most recently, Crown Cut Guide was updated on November 18, 2026 and StudPlan on November 19, 2026.

Other comparisons